Happy Thanksgiving and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
325 user(s) are online (294 user(s) are browsing Forums)

Members: 1
Guests: 324

Ken_P, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



« 1 ... 11 12 13 (14) 15 16 17 ... 60 »

Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Forum Ambassador
Forum Ambassador

HH56
See User information
A couple of issues I had when starting a long sitting engine was with a lot of cranking with no start the plugs fouled and were moist so were grounding the spark. Also, make sure the points have not oxidized from just sitting. Only takes a few seconds to use a point file or run some coarse paper like from a heavy paper sack thru them to clean off any oily deposits.

Posted on: 2023/11/4 15:14
Howard
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

kevinpackard
See User information
Howard is right, check the points. Likely oxidized or not adjusted correctly. Ross has a great video that explains how to adjust the distributor correctly including the points.

Double check the simple things. Like correct wires going to the plugs in the correct order. Check the cap and rotor for burning or corrosion. Make sure the cool is getting voltage, etc. Initial timing also.

You'll get it, just need to figure out where the problem lies.

Kevin

Posted on: 2023/11/4 16:11
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Cleaned the points…used 600 sandpaper per Ross’ suggestion. Got spark….and she started right up.

She starts very easy now and seems to run quite smooth.

But….there’s always a but.

The I’m not seeing the oil pressure pick up on the gauge. Tried a couple of things after talking to Ross…I really owe him dinner or something after today.

Bought an oil pressure gauge at the auto parts and hooked it up. Same thing.

So, Ross thinks it’s likely that either they oil pump needs primed or the pickup in the pan is plugged.

So, more work to do, but today was still a very good day. Just know it runs well is awesome..

On the down side, the new fuel sending unit I put in is not working. I had tested it with the fuel gauge before installing and it was working. Then installed it, re-installed the tank, added gas….and nothing.

I’ll lower the tank (not remove) it and see if I can get to it to check the connections at the tank.

In the meantime, I’ll also tackle replacing the seal in the steering box.

Posted on: 2023/11/4 19:08
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
What is this? I noticed it while under the car today working on other things.

If is near the brake line on the front passenger side.

Can’t see that it goes anywhere, but the hole is threaded.

Attach file:



jpeg  IMG_8390.jpeg (180.37 KB)
225755_6546e0fcc8ac3.jpeg 1536X2048 px

Posted on: 2023/11/4 19:25
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Forum Ambassador
Forum Ambassador

Cli55er
See User information
Fuel line connection for hardline … other side is for flex house going to fuel pump

Posted on: 2023/11/4 22:12
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021
[url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Forum Ambassador
Forum Ambassador

Cli55er
See User information
Have had this happen…. Probably the ground wire or the grounding through tank is not good.


Quote:

Don B wrote:
Cleaned the points…used 600 sandpaper per Ross’ suggestion. Got spark….and she started right up.

She starts very easy now and seems to run quite smooth.

But….there’s always a but.

The I’m not seeing the oil pressure pick up on the gauge. Tried a couple of things after talking to Ross…I really owe him dinner or something after today.

Bought an oil pressure gauge at the auto parts and hooked it up. Same thing.

So, Ross thinks it’s likely that either they oil pump needs primed or the pickup in the pan is plugged.

So, more work to do, but today was still a very good day. Just know it runs well is awesome..

On the down side, the new fuel sending unit I put in is not working. I had tested it with the fuel gauge before installing and it was working. Then installed it, re-installed the tank, added gas….and nothing.

I’ll lower the tank (not remove) it and see if I can get to it to check the connections at the tank.

In the meantime, I’ll also tackle replacing the seal in the steering box.

Posted on: 2023/11/4 22:16
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021
[url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Well now, that’s interesting. Clearly, my fuel line is not original. Currently, my fuel line goes across to the drivers side and then back to the rear.

Based on this, the hard-line must have gone to the rear on the passenger side.

What I have works, so I’m going to leave that alone for now. Just one more thing to add to the list of corrections to be made.

Posted on: 2023/11/4 22:18
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Forum Ambassador
Forum Ambassador

Cli55er
See User information
New gauge a mechanical oil gauge? If so… should come with the white plastic line…. You’ll be able to see if oil is even coming up to the gauge that way. If not…. Could be a clogged port hole filled with thick crusty oil…. Or as Ross says…

Quote:

Don B wrote:
Cleaned the points…used 600 sandpaper per Ross’ suggestion. Got spark….and she started right up.

She starts very easy now and seems to run quite smooth.

But….there’s always a but.

The I’m not seeing the oil pressure pick up on the gauge. Tried a couple of things after talking to Ross…I really owe him dinner or something after today.

Bought an oil pressure gauge at the auto parts and hooked it up. Same thing.

So, Ross thinks it’s likely that either they oil pump needs primed or the pickup in the pan is plugged.

So, more work to do, but today was still a very good day. Just know it runs well is awesome..

On the down side, the new fuel sending unit I put in is not working. I had tested it with the fuel gauge before installing and it was working. Then installed it, re-installed the tank, added gas….and nothing.

I’ll lower the tank (not remove) it and see if I can get to it to check the connections at the tank.

In the meantime, I’ll also tackle replacing the seal in the steering box.

Posted on: 2023/11/4 22:22
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021
[url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Forum Ambassador
Forum Ambassador

Cli55er
See User information
Yes original would have been down passenger’s frame rail… to that connection that goes through the frame…. Then the flex hose goes from that to the fuel pump.

Quote:

Don B wrote:
Well now, that’s interesting. Clearly, my fuel line is not original. Currently, my fuel line goes across to the drivers side and then back to the rear.

Based on this, the hard-line must have gone to the rear on the passenger side.

What I have works, so I’m going to leave that alone for now. Just one more thing to add to the list of corrections to be made.

Posted on: 2023/11/4 22:24
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021
[url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Quote:

Cli55er wrote:
New gauge a mechanical oil gauge? If so… should come with the white plastic line…. You’ll be able to see if oil is even coming up to the gauge that way. If not…. Could be a clogged port hole filled with thick crusty oil…. Or as Ross says…

Quote:

Don B wrote:
Cleaned the points…used 600 sandpaper per Ross’ suggestion. Got spark….and she started right up.

She starts very easy now and seems to run quite smooth.

But….there’s always a but.

The I’m not seeing the oil pressure pick up on the gauge. Tried a couple of things after talking to Ross…I really owe him dinner or something after today.

Bought an oil pressure gauge at the auto parts and hooked it up. Same thing.

So, Ross thinks it’s likely that either they oil pump needs primed or the pickup in the pan is plugged.

So, more work to do, but today was still a very good day. Just know it runs well is awesome..

On the down side, the new fuel sending unit I put in is not working. I had tested it with the fuel gauge before installing and it was working. Then installed it, re-installed the tank, added gas….and nothing.

I’ll lower the tank (not remove) it and see if I can get to it to check the connections at the tank.

In the meantime, I’ll also tackle replacing the seal in the steering box.



The new gauge is mechanical. You are correct, it came with a nylon translucent tube. I can see some oil coming part way up the tube, but not far. It sounds like it should be pushing the oil to the gauge pretty quickly. I want to be careful and not cause bigger problems.

Posted on: 2023/11/4 23:00
 Top  Print   
 




« 1 ... 11 12 13 (14) 15 16 17 ... 60 »





- The following Google Ad-Sense Advert helps fund the cost of providing this free resource -
- Logged in users will not see these. Please Join and Donate to help support the website -
Search
Recent Photos
Photo of the Day
Recent Registry
Upcoming Events
32nd Annual Florida Packard Club Meet
01/26/2025
46th Annual Texas Packard Meet
04/03/2025 - 04/06/2025
Packard Salon - Calling All Twelves
05/27/2025 - 05/29/2025
58th Annual National Meet
05/31/2025 - 06/06/2025
AACA Fall Meet (Hershey)
10/06/2025 - 10/10/2025
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved