![Bottom Bottom](https://packardinfo.com/xoops/html/modules/newbb/templates/images/icon/down.png)
![Previous Topic Previous Topic](https://packardinfo.com/xoops/html/modules/newbb/templates/images/icon/previous.png)
![Next Topic Next Topic](https://packardinfo.com/xoops/html/modules/newbb/templates/images/icon/next.png)
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Well, when Wade says he is going to take something apart..........
How did you finally get the retainer part of the rear axle bearing out?
Posted on: 2009/4/24 16:42
|
|||
Carpe Diem!!
![]() |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Mal
You can come and clean at our house anytime you like. Big Red's mrs
Posted on: 2009/4/25 7:22
|
|||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Looking forward to Gina's pictures of Mal with the vacuum.....
![]()
Posted on: 2009/4/25 19:08
|
|||
Carpe Diem!!
![]() |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
Appin wrote:.......How did you finally get the retainer part of the rear axle bearing out? John, Last time at the workshop, Thursday, the cones weren't out because of the struggles with engine and trans removal diverting attention somewhat. Presume the pic below is what we're talking about and Wade's thought's were along the lines of hitting them with the arc welder, a spot or two of pelican poo and the consequent temp change may be enough to free them up. If not, then welding a bolt across the cone so that a slide hammer can then be used to "persuade" the cones to vacate the premises should do the trick. Will know more on Tuesday when I get back to the workshop.
Posted on: 2009/4/26 3:40
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
wades_shed wrote: Mal You can come and clean at our house anytime you like. Big Red's mrs Quote: Appin wrote: Looking forward to Gina's pictures of Mal with the vacuum..... Gina(Big Red's mrs) and John, We're getting into very dangerous territory here. "Unfortunately" I have a wife, Kath the love of my life, who would not be at all understanding if I started cleaning other peoples houses. For years I have been able to feign ignorance about such things as "how to operate a vacuum cleaner" and "house dusting" and so far this had succeeded. If I did demonstrate any ability in such things, I'm sure the word would soon spread and besides my existence being made even more miserable than it is now I would be expected to perform those functions at home as well. Accordingly I politely decline Gina's "offer" and am not at all amused by John's pictorial evidence request. And Gina, if you're going to post in PackardInfo, I suggest you become a PackardInfo member. In fact, then you may be able to lay claim to one or some of the Packard's in your family's "collection" in your own right.
Posted on: 2009/4/26 4:02
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Tuesday 28th April 2009
Back to the workshop after the week-end's escapades. After a photo and measuring session under the rear end of the '34 and "Big Red" with the Spring retaining and shock mounting plates, that's the term I'm using for now unless someone can correct me. They are the plates(blocks?) under each rear spring through which the U-bolts pass and which the shock link attaches to by a protruding "arm". Looking in Wade's '33 to '36 Packard Service Parts List for the part description didn't help either. I'll continue this part of the day's activities in the "1934 shock links" thread in the Pre-War Forum after I've finished here. In my absence Wade had kept himself busy picking up the rebuilt brake parts, taking out the fuel tank, removing the steering column and box and (Careful...Gina might be listening or watching) cleaning up some parts. The tank came out because the fuel gauge wasn't working. The steering column and box came out because of oil leaks. And, presumably, the parts were cleaned because Mal wasn't there! While I was taking the Spring retaining and shock mounting plates pic's Wade was disassembling the steering column and steering box. Wade also checked the fuel sender, gauge, etc. Turns out it's "only" a real bad earth for the fuel tank but while things are out all will be checked. However during this Noel arrived and work broke up. Noel had called in to pick up a couple of "Certificates of Appreciation" which he'll deliver to the Restoration workshop at Crookwell and the Bradman Museum at Bowral in appreciation of their PACA Rally efforts. Noel will be in Crookwell tomorrow on business and readily agreed to be the club's ambassador in delivering these items. And while Noel is in the Southern Highlands I prevailed upon him to stop into the Mittagong RSL Club and pick up the prize I won in the Raffle being conducted there during the Rally. For your information I won a "Scrapbooking Set" which I'm sure our daughter will appreciate as she's right into craft. Unless the Dark Side of the Force overwhelms me and Packards are replaced by Scrapbooking, whatever that is. Wade was also quite upset because the parts he'd ordered from MaxM's hadn't arrived. Apparently they were consigned by UPS who sub-contracted local delivery to AustraliaPost who's delivery guy couldn't find the workshop! It's bloody hard to miss I'll tell you, the guy must have been driving around with his eyes shut! No attempt was made to contact Wade, and there was no attempt at a second delivery, and so the parts have been returned to sender. What a joke! Back on the tools and after cleaning up part of the pedal linkages, the rear axle U-bolts and nuts, the steering column and box, the front engine mount and the fuel filler pipe I was done for the day. Left Wade cleaning the water jacket cover plate which looks a little sad having a number of sizable pits. The inner plate definitely needs to be replaced as it was quite rusty with holes through it in places. Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2009/4/28 4:32
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Wednesday 29th April 2009
Originally I had no intention of going to the workshop today, but a request from Eric changed that. So after dropping my sister at the airport arrived at the workshop this afternoon. There I found Wade had been out and about and picked up his resurfaced flywheel, rebuilt clutch plate and resurfaced and rebuilt pressure plate. He'd also picked up the bearings and seals previously ordered as well as some more now also needed. And he'd been busy too - finishing the initial cleaning of the water jacket cover plate which he also leak tested overnight and which it passed so should be OK to reuse. However the inner water distribution plate will require replacement. The right front suspension was now all apart and Wade showed me the grooves on the king pin caused by the rollers "chattering" there. The tappet cover and also the full double layer rubber gasket were also off and the tappets look OK and there's no sludge. Left Wade reassembling the steering box and shaft, but I'll be back there tomorrow. Now to Eric's request "I want to know the inside diameter of Wade's bellhousing flange for a certain "project" I have spinning in my head" and a query from me "Do you want the depth measurement too?" to which Eric responded "Yes please". So here we go: Inside diameter of bellhousing at trans flange - 15" Diameter of bellhousing bolt pattern - 16" (It's circular) Outside diameter of ring gear on flywheel - 14 & 7/8" Depth - From back of bellhousing flange to surface of crankshaft flange - 2 & 3/16" Spigot bearing outside diameter - 2" Crankhaft flange bolt pattern diameter 3 & 7/8" All dimensions were taken with a hand held steel tape and are "pretty accurate" but for Eric's purposes will suffice and I threw in a few extras not requested. And Eric, if there's any more required will be glad to provide those too. As to whether Eric wishes to share what's "spinning" in his head, I'm leave that for him to announce. But being he is our resident "mad scientist" all I'll say is - It's definitely different! EDIT - Although Eric wasn't pleased that he was "outed" on this he's agreed the post can stay but will not be expanding on the purpose of his request. He wants to keep the world in suspense for the great unveiling at the right time! Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2009/4/29 1:46
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Re: pic above: '37 Lagonda.JPG
How old is the garage that the car is setting in front of???? The reason i ask is that it appears to have a tile (slate?) roof on it ????
Posted on: 2009/4/29 6:09
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Keith,
Don't know the age of the garage, it was in the lot behind the car yard and is a private residence, but probably 70/80 years old. Many Australian homes(and garages) have clay roof tiles and this type of roofing has been used here for over 100 years. Other roofing materials are slate tiles(more common many years ago on high value houses), cement tiles(used a lot in the last 20 years often replacing clay tiles), colorbond corrugated roof sheeting(also used a lot in the last 20 years) and corrugated galvanised roof sheeting(replaced now by the colorbond sheeting). I have never seen a wooden shingle type roof in Australia. http://www.boral.com.au/product_index/roof_tiles.asp http://www.colorbond.com/
Posted on: 2009/4/29 16:06
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Register To PostTopic is Locked