Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
178 user(s) are online (121 user(s) are browsing Forums)

Members: 0
Guests: 178

more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



(1) 2 »

High Speed Rear End for 1941 Packard 110 club coupe?
#1
Just popping in
Just popping in

Frank D Roman
See User information
My '41 Packard club coupe seems to be geared low as the top speed is 45-50 mph.

Thus, it is not safe for interstate travel.

Rather than finding an R-9 of R-11 overdrive unit, is it possible to put in a different gear ratio that will give my car another 15 mph?

I am not a mechanic so I do not not if the higher speed rear end is out there.

Suggestions are welcome, Thanks

Posted on: 2023/4/23 21:09
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#2
Home away from home
Home away from home

TxGoat
See User information
Is your car a 115 six, a 120 eight, or one of the "senior" cars?

What size tires are you using?

Posted on: 2023/4/23 21:25
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#3
Forum Ambassador
Forum Ambassador

Ozstatman
See User information
Being the thread is headed up for a '41 110 Coupe, it's a 6.

And Frank D Roman,
to PackardInfo. I invite you to include your '41 110 Club Coupe in PackardInfo's Packard Vehicle Registry.

Posted on: 2023/4/23 22:27
Mal
/o[]o\
====

Bowral, Southern Highlands of NSW, Australia
"Out of chaos comes order" - Nietzsche.

1938 Eight Touring Sedan - SOLD

1941 One-Twenty Club Coupe - SOLD

1948 Super Eight Limo, chassis RHD - SOLD

1950 Eight Touring Sedan - SOLD

What's this?
Put your Packard in the Packard Vehicle Registry!
Here's how!
Any questions - PM or email me at ozstatman@gmail.com
 Top  Print   
Laugh (1)
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#4
Home away from home
Home away from home

TxGoat
See User information
The standard axle ratio for the 1941 110 is 4.3 to 1. Optional ratio is 4.55 to 1, and overdrive equipped cars came with the 4.55 to 1 axle.

The 1941 120 series cars had a 4.09 to 1 axle as standard equipment.

A 120 series axle would probably fit under your car.

The 110 cars came with 6.50 X 16 tires, while the 120 cars came with 7.00 X 16 tires. The 7.00 X 16 tires are larger in diameter and will reduce engine speed at any given road speed somewhat. Some 7.00 X 16 tires are 31" in diameter, while some 6.50 tires may be closer to 28" in diameter.

The ideal setup for your car would be to install the overdrive transmission with the appropriate axle ratio. Changing tire sizes or axle ratios will affect speedometer accuracy.

The first thing you need to do is to determine exactly which axle ratio your car presently has.

Posted on: 2023/4/24 7:32
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#5
Forum Ambassador
Forum Ambassador

flackmaster
See User information
The 120 axle is a different animal.

Best you join The Church of the Holy Overdrive. You will think an early taste of Heaven.

Posted on: 2023/4/24 8:38
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#6
Home away from home
Home away from home

TxGoat
See User information
You can't beat an overdrive. With OD, you get better low speed performance plus a high speed cruising gear. You also get an on-demand "passing gear" which allows for quick pickup at speeds under 60 MPH or so.

With overdrive and the correct overdrive rear axle ratio, the car will be easier to drive in traffic and have better pickup at speeds from 5 MPH to about 35-45 MPH. Out on the highway, the engine will run about 25% slower in OD than it would with a standard transmission and axle, and much slower than a car with the optional low geared axle and no overdrive.

The car should be able to cruise at 65 to 70 MPH in OD under most conditions, assuming it is in good mechanical condition.

You get a quieter ride, longer engine life, and better open road fuel economy.

Posted on: 2023/4/24 11:23
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#7
Just popping in
Just popping in

Frank D Roman
See User information
Any leads on acquiring an overdrive unit for my 1941 club coupe , 6 cylinder is appreciated. The tire size is 205/75/R15.

Thanks, Frank

Posted on: 2023/4/24 20:44
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#8
Forum Ambassador
Forum Ambassador

flackmaster
See User information
Bill Aske, Parkton, MD.

Posted on: 2023/4/24 20:55
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#9
Home away from home
Home away from home

Wat_Tyler
See User information
I vaguely recall seeing an o/d unit for a 110 for sale somewhere recently - as in, in the last several weeks. Now if I could only remember where.


I'll agree that an o/d unit will help save on engine wear, but Packards guzzle fuel. It was one of the customer bitches for years.

Posted on: 2023/4/25 5:54
If you're not having fun, maybe it's your own damned fault.
 Top  Print   
 


Re: High Speed Rear End for 1941 Packard 110 club coupe?
#10
Home away from home
Home away from home

TxGoat
See User information
"The tire size is 205/75/R15."

This may be part of your problem.

A smaller diameter tire will cause the car to move slower at any given engine speed in high gear.

A typical 205 75 R 15 passenger car tire will have a nominal diameter of 27".

A tire similar to what came on your car would be a 6.50 X 16 bias ply with a diameter of around 29.5".

A 7.00 X 16 tire of similar construction would have a diameter of about 31".


The larger diameter tire will roll farther with each turn of the rear wheels, allowing the car to go faster at any given engine speed.

I'm pretty sure your car came with 16" wheels. If it did originally have 15" wheels, the same math applies.

A 7.10 X 15 tire of the correct type for a 1941 Packard would have a diameter around 30".

I suggest finding out exactly what wheel size your car originally was equipped with, and what tire sizes were standard.

Detailed information relating to original equipment is available on this website in the Literature Archive.

Your car will ride and handle very well with original-type and size tires, and if your car has the standard axle ratio, you may find that you don't need to make any changes other than installing correct-size wheels and tires.

That said, the overdrive is a wonderful adjunct to any car, and is especially nice to have on pre-WWII cars.

If I owned your car, I'd want the correct wheels, tires AND the overdrive.

Posted on: 2023/4/25 10:25
 Top  Print   
 




(1) 2 »




Search
Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved