Packard Forum Index » V-8 (1955-56)

Topic: gas cap

Bottom

Previous Topic

Next Topic Register To Post

55clipper

gas cap

Home away from home

Couple of years ago I bought a gas cap from a Packard parts supplier. It was obviously not nos, but was new. Yesterday, I ran out of gas and went to remove the cap..It twisted but would not release. I ended up prying the ears on the cap open and it came off. Inspecting the cap with one off my other car, I found that the new cap was not as deep. Close but no cigar. Another case of replacement parts that don't work.

Posted on: 2015/5/9 15:18

PackardV8

Re: gas cap

Home away from home

Is there a name or a number or any kind of identification on the cap???? My guess is that u ought to be able to buy one at an auto parts store. Take the old along to match up.

Posted on: 2015/5/9 16:31

VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245

PackardV8

Re: gas cap

Home away from home

Also note that some gas caps of that era mite require to push DOWN on the cap while turning much like a radddiator cap.

Posted on: 2015/5/9 16:32

VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245

55clipper

Re: gas cap

Home away from home

I did try at a couple of locals but they did not have a match. The replacement cap I got was not a pushdown. I assume if I order a cap from a Packard guy it would be correct. There are no markings of any kind on the cap.
From the outside it is identical but when I placed them side by side I could see the new one was not as thick as the old one.

Posted on: 2015/5/9 18:15

Owen_Dyneto

Re: gas cap

Forum Ambassador

Though I still have the OEM gas cap on my 56, I do carry a spare in case I get stupid and leave it on the top of a gas pump somewhere. The spare is a standard NAPA item, functionally equivalent but a bit different in appearance - raised "wings" for your thumbs rather than the protruding side thumb wings; it's a perfect fit. If you want the NAPA number I believe I still have the box.

Posted on: 2015/5/9 18:47

55clipper

Re: gas cap

Home away from home

Thanks for the offer, Owen. We have a NAPA in the next town over from me. I'll try them first.

Posted on: 2015/5/9 19:47

BigKev

Re: gas cap

Webmaster

Once we get the NAPA part number. Please put in the the Part X-Ref here on the website so we can keep a record of it and help the next guy out.

Thanks!

Posted on: 2015/5/11 12:20

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

64avanti

Re: gas cap

Home away from home

Need a cap for a '55. it looks like 1950-1956?
Got a number?

Posted on: 2015/6/21 20:15

Owen_Dyneto

Re: gas cap

Forum Ambassador

Functional equivalent to OEM is a Stant G-37 for 1956, I assume 1955 is the same. I've got a couple of extras (used); if you want one send me a PM with your mailing address.

Posted on: 2015/6/21 21:26