Packard Forum Index » Post-War (1946-54)

Topic: What is this for? The thread..

Bottom

Previous Topic

Next Topic Register To Post

« 1 (2) 3 4 »

Deskdriver

Re: What is this for? The thread..

#11

Home away from home

Attached is a picture of a "Fore aft stabilizer" in my 23 series. I have been wondering what to call this part to order new rubber pieces.

Sorry I am such a dummy at adding pictures to the post, someone told me how months ago and I'll be danged if I remember.

Is this part #333790?
Thanks,
Barry

Attach file:

(104.69 KB)

Posted on: 2015/8/15 18:46

[url=http://packardinf

Deskdriver

Re: What is this for? The thread..

#12

Home away from home

Geez, it added the picture. Here are a couple of others.

The part number in the previous post I made is not the correct one after researching the Steele Products catalog.

Anybody have a part number and or idea where I can get new grommets for this?

Thanks,
Barry

Attach file:

(101.18 KB)

(94.82 KB)

Posted on: 2015/8/15 18:57

[url=http://packardinf

HH56

Re: What is this for? The thread..

#13

Forum Ambassador

Packard called the rod and brackets a snubber assy. Here is Steeles listing for their replacement rubber. Kanter sells them by the set too. Listed on their 48-54 page in Gr 5.1504

Attach file:

(18.10 KB)

Posted on: 2015/8/15 19:10

Howard

Packard 1948

Re: What is this for? The thread..

#14

Home away from home

Hi Guys,

I cannot THANK YOU enough for all of your help. You guys are really helpful beyond words.

Yep...thats them...see attached PDF (looks like my rear bracket is somewhat different than yours).

THANKS AGAIN!!!

Attach file:

Size: 175.04 KB; Hits: 61

Posted on: 2015/8/15 19:38

Bill,

Dedicated to keeping the man who owns one on the road!!!

Deskdriver

Re: What is this for? The thread..

#15

Home away from home

Thanks HH56! I thought you would know the answer.

Posted on: 2015/8/15 23:18

[url=http://packardinf

Wazza22

Re: What is this for? The thread..

#16

Not too shy to talk

Hi there,

After spending some quality time with google I have not been able to find any other photos of the rear of a 49/50 with these two lights. They look like they could be reverse lights? Can anyone shed any 'light' on it?!

Cheers,

Warren

Attach file:

(106.57 KB)

(102.49 KB)

Posted on: 2015/8/25 5:40

Owen_Dyneto

Re: What is this for? The thread..

#17

Forum Ambassador

They appear to be the dealer option back up lights, though normally only one was fitted, to the driver's side. The switch to activate it (or them in your case) should be under the hood on the gear shift linkage.

Posted on: 2015/8/25 6:30

bkazmer

Re: What is this for? The thread..

#18

Home away from home

The factory accessory has "PACKARD" stamped on the top. There is a similarly shaped generic aftermarket version.

Posted on: 2015/8/25 10:49

Wazza22

Re: What is this for? The thread..

#19

Not too shy to talk

Thank you for the information, I thought they may have been reverse lights. They have nothing stamped on them so I suspect they are an aftermarket.

I will have to investigate the switch as they do not operate when I select reverse.

Many thanks!

Cheers,

Warren

Posted on: 2015/8/25 16:09

Wesley Boyer

Re: What is this for? The thread..

#20

Home away from home

I hope Wazza doesn't mine me using his thread, but I have a cable I'm trying to identify.
So here it is, it looks like Packard Part Number 378144. The cable multiple wires of different lengths. Its about 7 ft. long and has one wire with a fuse cap end. The closest I could find was in the 1947 Parts book was Part Number 378147 2000-001-03-06-10-11 for 4.057651 Wiring Harness -Rear, but that's not it.
Thanks for any help.
Wes

Attach file: