Re: One oil pump modification now on file
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
thanks jack I will,, did not think about that,,,
thanks
Posted on: 2015/12/12 23:25
|
|||
Riki
|
||||
|
Re: One oil pump modification now on file
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
as hot as it got, yap, it might of galled the push rod seat, I cleaned all them, but did not really inspect them,
thanks jack
Posted on: 2015/12/12 23:38
|
|||
Riki
|
||||
|
Re: One oil pump modification now on file
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
We have refill the engine with 20 W 50 oil.
Now, the noise comes when the engine is cold, then it goes away ... for 10 minutes. Then noise again ... ![]() Is the Oldsmobile oil pump the only solution or is it an other ? I we change the hydraulic tappets ? I plan to revolve it in 2016. Could not stay as is. The engine has been restored less than 10 years ago.
Posted on: 2015/12/14 11:47
|
|||
1956 Four Hundred - mostly original
1956 Caribbean hardtop project car 1958 Cadillac Eldorado Seville |
||||
|
Re: One oil pump modification now on file
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
Now, the noise comes when the engine is cold, then it goes away ... for 10 minutes. Then noise again ... I sold over 60 Olds oil pump adapter kits before I turned production and sales of it over to Jack Vines. I had 100% satisfaction (a lot of feedback) in correcting low oil pressure and severe tappet noise problems. It's not an expensive solution either compared to new tappets or an engine overhaul -- once you get the oil pan off (itself a PITA). craig
Posted on: 2015/12/14 12:23
|
|||
Nuke them from orbit, it's the only way to be sure! Ellen Ripley "Aliens"
Time flies like an arrow. Frui |
||||
|
Re: One oil pump modification now on file
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
By the way, I did some fluid dynamics calculations for Ross's modification. Assuming the shaft has an average amount of wear, it's only about 1% pressure loss.
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=10623&post_id=146227#forumpost146227
Posted on: Yesterday 19:55
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|