Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Home away from home
|
kev,,really, lock washers!,,
give me the size I can make those spacers,,,,,
Posted on: 2016/4/4 0:40
|
|||
Riki
|
||||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Home away from home
|
How we coming along Kev? I see you must be giving the PS setup a look at and planning.
John
Posted on: 2016/4/13 11:46
|
|||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Webmaster
|
Sorry just been swapped the last couple of weeks, so have not managed to get back in the garage.
I received a new inner shifter arm from Joel (thanks Joel!), I just need to drill the hole for the roll-pin in it. I think that was a '56 change to keep the shift arm indexed correctly. Trying to get thought the transmission before I start on the PS. Both because of space to work on it, and my own sanity.
Posted on: 2016/4/13 14:53
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Webmaster
|
A little more work on the transmission today. I had to drill the hole in the inner shift arm for the roll pin. So one I transferred the measurements from the old one to the new one, I was abe to drill it match it up with the old broken one. Then I was able to reassemble the shift mech.
The I move on to reassembling the high-range clutch. I replaced the lip seal and the shaft sealing ring. (no pics of that) The I put the clutch pack back together, prelubing with ATF along the way. Pics show the rest. I always started working on the Planetary assemble. But haven't finished that yet as a have a couple of questions I need Ross to answer first. Attach file: (50.18 KB) (46.18 KB) (30.92 KB) (38.45 KB) (49.13 KB) (47.09 KB) (64.52 KB) (52.06 KB) (38.20 KB) (44.73 KB) (51.64 KB) (36.33 KB) (33.27 KB)
Posted on: 2016/4/17 20:36
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Home away from home
|
I have stacks of the clutch disks that came with a stock of new Packard parts that I bought years ago from a San Jos? dealer and most are like yours but others aren't. Are they all the same in your transmissions?
Posted on: 2016/4/17 21:05
|
|||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Webmaster
|
The disks are all the same size in the ultramatics I belive. But these are faced with modern Raybestos friction material instead of the original cork.
Posted on: 2016/4/17 21:16
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Home away from home
|
Thank you and that's what I thought. Most of mine are like yours but others have finer teeth and look different overall so I suspect the odd ones are Chrysler as I think the dealer had switched over.
Posted on: 2016/4/17 21:20
|
|||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Home away from home
|
the part that the seal goes on ,,did you check if the inside was filed?,, this lets oil in so plates don't burn,
EDITED,, bottom part
Posted on: 2016/4/17 22:32
|
|||
Riki
|
||||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Webmaster
|
Riki, sorry, I don't understand what you mean.
Posted on: 2016/4/17 22:38
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|