|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
 
|
First email from Jim:
".....I'll send you some of the pictures of building the Indy car with the Packard running gear. I am an amateur of fabrication but the dream and ambition sometimes speaks louder than the ability. I only had to call in a few friends for their talent during this build but I couldn't have gotten this far without them. I'll start sending the pictures, starting with the rolling chassis which started out as a 1952 Chevy long box frame and suspension. I had to take over 32 inches out of the frame length, but the width and basic suspension was the same that they used in the 30's Indy race cars. If you have any questions feel free to get a hold of me, the Indy build is far from being on the road at this point. So far the drive train, all the clutch and shift linkages, the floor shifter are all done....." Then followed a series of emails with pic's attached.
Posted on: 2016/6/1 13:59
|
|||
|
Mal
/o[]o\ ====  Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this?  Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
".....This is the chassis I started with on the Indy build....."
Attach file:  (50.83 KB) (50.02 KB)
Posted on: 2016/6/1 14:01
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
".....The Kelsey-Hayes 17 inch 1934 to '36 Chevy 6 lug wheels after I sandblasted and painted them....."
Attach file: (29.84 KB) (63.12 KB)
Posted on: 2016/6/1 14:05
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
".....took 30 some inches out of the frame length at this point, but the Packard engine and tranny is mocked into the frame....."
Attach file: (52.62 KB) (58.84 KB)
Posted on: 2016/6/1 14:09
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
".....starting of forming the body and steering assembly....."
Attach file: (36.26 KB) (49.59 KB) (50.63 KB) (41.57 KB)
Posted on: 2016/6/1 14:16
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
".....pictures show the WD 45 Allis Chalmers tractor radiator and shell that I'll be using, also the dash board I made....."
EDIT - Have to go now, more pic's later! Attach file: (49.72 KB) (47.56 KB) (59.00 KB) (49.47 KB) (44.40 KB) (47.76 KB)
Posted on: 2016/6/1 14:41
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Now this is really cool! A Packard Eight in a home built Hot Rod...You should get Hemmings interested in your project for a feature article. Due to the Packard power plant, this machine is going to garner a lot of ink I do believe. Ernie
Posted on: 2016/6/2 10:17
|
|||
|
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' 
|
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
"Looks like a 3/4 or 1 ton Chevy/GMC truck chassis"
Back in Post #11 Jim had advised: "the rolling chassis which started out as a 1952 Chevy long box frame and suspension. I had to take over 32 inches out of the frame length, but the width and basic suspension was the same that they used in the 30's Indy race cars....."
Posted on: 2016/6/2 19:37
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
|
Re: Which shifting arm on a 1954 Packard manual trans is for reverse/low gear
|
||||
|---|---|---|---|---|
|
Forum Ambassador
|
Back on deck again,and Jim's next batch of pic's.
".....Here she is progressing along....." Attach file: (63.53 KB) (59.04 KB) (52.65 KB)
Posted on: 2016/6/2 19:41
|
|||
|
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
||||
