Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Forum Ambassador
|
Which ratio do you have now?
Posted on: 2016/9/3 20:42
|
|||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
I am not sure honestly, I have it out now due to some leaking seals and thought if I could buy a higher geared one that was interchangeable it would be a good time to make the change
Posted on: 2016/9/3 21:00
|
|||
1925 333 Phaeton
1926 Phantom 1 Rolls Royce 1926 Hudon super six Coupe 1927 Peerless Roadster 1927 433 7 passenger limo 1928 Peerless coupe 1929 Peerless Boatail coupe 1929 Phantom I Rolls Royce 1930 Springfield Phantom 1 Regent 1931 L-29 Cord 1931 833 Convertible 1931 833 Opera Coupe 1934 Phantom 11 Rolls Royce 1934 1101 Roadster 1934 1101 Coupe 1934 V12 Opera coupe 1936 120 |
||||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Forum Ambassador
|
If you want a higher (numerically lower) ratio, you'll have to first know what ratio you currently have. The ratios available from the factory for the 833 were 4.07, 4.38, 4.69 and 5.08.
Posted on: 2016/9/3 22:12
|
|||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
Divide the number of pinion teeth into the number of ring gear teeth to get the ratio.
Posted on: 2016/9/3 22:38
|
|||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
It should be stamped on the housing.
Posted on: 2016/9/3 23:27
|
|||
I can explain it to you but I can't understand it for you
Bad company corrupts good character! Farming: the art of losing money while working 100 hours a week to feed people who think you are trying to kill them |
||||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
here are all the numbers I found on the gear this morning
"140436-12-61-Packard 0 30 577" seems none are close to what you listed, can you help me understand this better? Thanks for your help Barry
Posted on: 2016/9/4 10:34
|
|||
1925 333 Phaeton
1926 Phantom 1 Rolls Royce 1926 Hudon super six Coupe 1927 Peerless Roadster 1927 433 7 passenger limo 1928 Peerless coupe 1929 Peerless Boatail coupe 1929 Phantom I Rolls Royce 1930 Springfield Phantom 1 Regent 1931 L-29 Cord 1931 833 Convertible 1931 833 Opera Coupe 1934 Phantom 11 Rolls Royce 1934 1101 Roadster 1934 1101 Coupe 1934 V12 Opera coupe 1936 120 |
||||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
You might have the 5.08:1 gear set. The middle "12-61" would indicate such a ratio. It is a very low (high numerically) gearing and I can see why you would want to change to a higher (low numerically) gear set.
(o[]o)
Posted on: 2016/9/4 10:47
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
It would be working great if you drive a lot of hill driving where you can't speed much anyway.
Posted on: 2016/9/4 12:15
|
|||
I can explain it to you but I can't understand it for you
Bad company corrupts good character! Farming: the art of losing money while working 100 hours a week to feed people who think you are trying to kill them |
||||
|
Re: 833 standard Changing rear axle gear ratio
|
||||
---|---|---|---|---|
Home away from home
|
that really makes sense, the car was sold in denver colorado so I assume it was geared that way to allow for the mountains.
Thank you for your input, I'm learning each day and it only gets more fun! Barry
Posted on: 2016/9/4 15:21
|
|||
1925 333 Phaeton
1926 Phantom 1 Rolls Royce 1926 Hudon super six Coupe 1927 Peerless Roadster 1927 433 7 passenger limo 1928 Peerless coupe 1929 Peerless Boatail coupe 1929 Phantom I Rolls Royce 1930 Springfield Phantom 1 Regent 1931 L-29 Cord 1931 833 Convertible 1931 833 Opera Coupe 1934 Phantom 11 Rolls Royce 1934 1101 Roadster 1934 1101 Coupe 1934 V12 Opera coupe 1936 120 |
||||
|