Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
Still a work in progress as to the best way of finishing the thin edges without the fiberglass construction being obvious with just a look. It's just a thought but maybe the edges can actually be laminated in as steel, leaving the fiberglass for the larger and more complicated contoured area.
Posted on: 2018/5/12 17:34
|
|||
All generalities are false.
Once I thought I was wrong but I was mistaken. Don Pierson Packard / IMPERIAL page CA DMV Licensed Vehicle VIN Verification 1951 Henney-Packard 3-Door Long Wheelbase Air Force Ambulance The 1951 Henney-Packard is For Sale! 1954 Packard Patrician 1954 Packard Patrician Parts Car 1956 Clipper Custom Sedan |
||||
|
Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
File and sand the edges smooth. Just as would be done with ANY other material.
Posted on: 2018/5/13 10:47
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Glass fit perfectly and they made good on one piece that was broken in shipping. Still good to get local prices if you have good patterns for them to work with.
Posted on: 2019/4/28 21:45
|
|||
Howard
|
||||
|
Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Howard, as I work on replacing the wiring for my Headlights. I notice a support bar that goes in front of the radiator and was wondering if you had one? I don't know if I have a spare or not but I will look around if you need one.
Wes
Posted on: 2020/7/9 10:55
|
|||
|
Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Wes, I have one but interesting is the bolting flange on mine was damaged similar but not quite as bad as the way yours is. Mine was off the car so am not sure which way it mounts. I mounted my bracket lower down with the cable on top.
Posted on: 2020/7/9 11:05
|
|||
Howard
|
||||
|
Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Howard, mine is as you see it in the picture, with the cable running along the bottom. The bracket is sandwiched between the fender and the Splash Guard that goes on top.
Wes
Posted on: 2020/7/9 13:19
|
|||
|
Re: Howard's 47 Custom project
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
If I lived closeby, I would gladly volunteer Some labor to show my gratitude for all your help.
Robert
Posted on: 2020/7/9 17:40
|
|||
|