'39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi Guys,
Going through my never ending list of 'to-do's' and one item was to R&R the driver's side rear crank window as it has a horizontal crack along the base. It's not very noticeable but needs to be done, and I got to removing it today. I am right up to the 'pulling it out' stage, but cannot figure how it can be extricated. There are 'fuzzy guides' on either side of the window that are riveted to the window frame. Do they have to be popped off and re-riveted, or is there a trick to it that I am not 'getting'??? Any help very much appreciated as I want to get them to the window guy in town as soon as I can. Chris.
Posted on: 2020/6/11 15:37
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi Brian,
Thanks for taking the time, man - much appreciated. The conclusion I came to was that the channels were going to have to come out, it's just that on my car the channels are riveted to the door frame and I was hoping there was a way of removing the glass without having to pop the rivets out. I guess I can use some small screws to put them back in, and then it would be fairly straightforward should it ever have to be disassembled again. Chris.
Posted on: 2020/6/11 19:14
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Is the inner fuzzy come off with the inside trim piece??
Posted on: 2020/6/11 19:50
|
|||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I have said publicly here, on more than one occasion, that this site and the folks that make it up are an invaluable resource, and that I am very grateful for all the help I get as I 'learn and burn' on my car, being a very basic mechanic and a rank newbie to the old car hobby.
Today was another case-in-point, thanks to Brian, as I had looked at the window for some time and could not figure it out. After reading his 'tutorial post', I went back and looked at the channels and sure enough, there WERE screws holding the tracks in place. They were so old and gummed up with dirt, that they LOOKED like rivets. I dug out the Phillips crosses with a razor knife and grabbed a very small star screwdriver and had the window in my hand in 5 minutes!! I KNOW you all know that feeling when you've been fighting with something and a solution comes to hand and, badda-bing - problem solved. Might seem to many like a silly little problem, but it is a big deal to me to find a fix!! Thank you Mr. DeBoeck and thank you Packard Info. Chris
Posted on: 2020/6/11 19:54
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi Chris,
Are you sure that the channels are riveted to the door frame and not to a metal backing channel ? Edit; I see that you have answered the question and resolved the problem. Congratulations !
Posted on: 2020/6/11 20:03
|
|||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Chris,
I've had that experience several times of being ready to tear my hair out, if I had any, and then someone here giving me a suggested solution in a kindly manner. And not like what I'd tell my kids when when they came to me for advice (What are you, stupid? The answer is so obvious. If you pierce your ears, I'm going to pierce my ears, for a perfect father-son combo.You want that?), but in a much more patient way to help me think it through as their mother would, which is why they stopped coming to me and went to their mother for advice. ("Well, if I were in your shoes, I could do this and there might be these consequence; or I could do that, with those consequences. So it's something to think about. But FYI, your dad said if you got your ears pierced, he would do it, too. and he already asked to borrow the those huge, gaudy earrings that Aunt Irene left me." She never told them exactly what to do, but they usually made a choice that worked. Are you sure those window screws started out as Phillips? Just checking. Joe
Posted on: 2020/6/12 10:27
|
|||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
Joe, I recall seeing somewhere that the "Phillips" cross type screw head was introduced in 1937. Before that all the screw heads were of the slot type. If so, Chris's Six should have Phillips type screws for most of the interior trim parts. Maybe someone else hare knows more about this.
Posted on: 2020/6/12 11:39
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
#4 Phillips head screws are listed for the door window channel in the 1935-41 parts list.
Posted on: 2020/6/12 11:57
|
|||
|
Re: '39 rear door crank window removal - HELP (please)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Shut me up, you guys. Now I remember, looking at them every day around the window moulding. All Phillips. Despite glaring evidence on sunny days, I always had it in my head that Phillips heads didn't come on the scene until the '40s or '50s. So many times with a Phillips screw driver in my hand I uncovered a flat head screw. Darn. I stand corrected. Take the advice from my kids. Don't listen to me, Chris.
What's worse, you guys, is that the Phillips screw was invented right here in Portland, Oregon by Henry F. Phillips. Gad. What's even worser is that his pretty daughter was a friend who taught me the Texas 2-step at a barn dance in the '70s.
Posted on: 2020/6/12 13:38
|
|||
|