Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Neither, if by "packed" you mean serviceable as in Packards 1955 and earlier. Axle ends for 1956, Twin Traction and conventional, Packard and Clipper, have permanently lubricated and sealed bearings. The 1956 units were outsourced to Dana, 1955 was the last of the Packard designed and built units.
Posted on: 2020/11/22 16:48
|
|||
|
Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
As Owen said, they are sealed bearings and the grease sealed inside was refined while Eisenhower was president. It has turned to something a bit like ear wax on a winters day so if you are doing a major service on the car I recommend new bearings. They are easy to come by as they were used on all manner of Ford products from '49 up.
Posted on: 2020/11/22 20:32
|
|||
|
Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Gentlemen thank you as always. I just rebuilt the rear brakes and had a thought the bearings could use a refresh. My Twin Traction axles have the paint stripe so hopefully they have been replaced at least once. Ross do you have a Ford part number I could take down to my local NAPA store?
Brakes are done and the bearings will be a future project. All the best and Happy Thanksgiving to all.
Posted on: 2020/11/23 13:11
|
|||
|
Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
P/N 88128R. When ordering make sure it includes both the bearing itself and the locking ring. Lot's of no-name cheap crap out there, I suggest buying a quality name brand.
https://www.finditparts.com/products/205575/cr-slash-skf-88128-r?srcid=CHL01SCL019-K205575-L22&msclkid=68c6f25ca758144cc572ade0a4fe6139&utm_source=bing&utm_medium=cpc&utm_campaign=SST%20%7C%20BPAC%201407(BSC)&utm_term=4580496721928917&utm_content=All%20Products
Posted on: 2020/11/23 13:46
|
|||
|
Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Many thanks Dave. Completely agree of all the poor quality parts out there. Fix it once and fix it right!
Posted on: 2020/11/23 14:27
|
|||
|
Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Locate ballbearings has large inventory of bearings
They are located in Palm desert CA.
Posted on: 2020/11/24 0:50
|
|||
Riki
|
||||
|
Re: 1956 Twin Traction Axle lubrication
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Highly recommend you take your axles to a competent shop to have the new bearings installed. The job takes a big press and a knowledgeable mechanic to do the job right.
Posted on: 2020/11/24 11:41
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|