Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Good Morning...Definitely check the valves to see if they will move up and down...take the side covers off and see what you can see...lube them with the same rust stuff as the rings...You have the time, you will win! Ernie in Arizona
Posted on: 2021/8/1 11:05
|
|||
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' ![]() |
||||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Just make sure that the Evaporust won't hurt any other metals that it might come in contact with (i.e. aluminum pistons). Read the label carefully. Evaporust is rather amazing stuff.
Posted on: 2021/8/1 14:28
|
|||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
btw, I assumed since the problem cylinders weren't draining the penetrant the issue was rings. Trying turning the crankbolt counterclockwise and if you get some movement then it's probably a valve. Perhaps soak the whole thing with diesel/ATF for a few weeks and then come back to it.
Posted on: 2021/8/1 14:34
|
|||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
You mean the bolt on the harmonic damper? I turn that leftie and it loosies. I'd need a big pipe wrench to turn that SOB counter clockwise.
Posted on: 2021/8/1 17:29
|
|||
If you're not having fun, maybe it's your own damned fault.
|
||||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
Wat_Tyler wrote: You mean the bolt on the harmonic damper? I turn that leftie and it loosies. I'd need a big pipe wrench to turn that SOB counter clockwise. Or use a lever of some description. With that(crowbar, big screwdriver or ????) you can try to turn the engine in the opposite direction to normal rotation.
Posted on: 2021/8/1 19:35
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
Wat_Tyler wrote: You mean the bolt on the harmonic damper? I turn that leftie and it loosies. I'd need a big pipe wrench to turn that SOB counter clockwise. Or use a lever of some description on the flywheel ring gear. With that(crowbar, big screwdriver or ????) you can try to turn the engine in the opposite direction to normal rotation.
Posted on: 2021/8/1 19:36
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Mopped out the ATF mixture yesterday and sprayed in some of the latest Miracle Rust Eater stuff.
Also, I put the breaker bar on for a check and . . . nope. I ain't bettin' heavily on this stuff, either, but it smelled strong.
Posted on: 2021/8/2 4:47
|
|||
If you're not having fun, maybe it's your own damned fault.
|
||||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I have freed really stuck engines by:
Soaking the pistons in oil, heating the cylinders to 300 degrees F and putting the car in gear with a tow strap from the frame to a tree with a come along putting pressure on the engine. rocking the car forward and backwards pops them loose.
Posted on: 2021/8/2 10:35
|
|||
|
Re: stuck engine
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I feel sort of sorry for the tree! Ernie in Arizona
Posted on: 2021/8/2 14:07
|
|||
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' ![]() |
||||
|