Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Webmaster
|
If you are going to use the Hirsch Paint, spray it vs brushing it. It was way to thin out of the car to brush.
The cheap HVLP detail gun from HF worked perfectly.
Posted on: 2023/11/16 19:30
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Home away from home
|
37 Kevin
If you need a spring for the shutters I had them made in stainless steel.
Posted on: 2023/11/17 1:41
|
|||
Riki
|
||||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Webmaster
|
No grille shutters on 115-C, they are fixed.
Posted on: 2023/11/17 7:49
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Webmaster
|
Exhaust manifolds reinstalled.
Posted on: 2023/11/17 17:15
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Home away from home
|
It looks really good Kev, the translation of the Jaguar engine is so nicely done too, bet the ghosts of Packard engineers are smiling, or kicking themselves for not doing it in the first place. Again, well done sir!
Bob J.
Posted on: 2023/11/17 17:33
|
|||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Webmaster
|
Thanks, it does look at home in there. Stuff on the passenger side is pretty tight. Pretty sure I wouldn't be able to remove the distributor without removing the fender.
Posted on: 2023/11/17 18:08
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Webmaster
|
Engine done and bagged. Moving on to degreasing the front frame and suspension so I can paint it.
I already chiseled about 2 lbs of compacted dirt and grease off of the front shocks.
Posted on: 2023/11/20 18:55
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Home away from home
|
I'd fill the shocks with oil and see if they leak.
Posted on: 2023/11/20 19:15
|
|||
|
Re: BigKev's 1937 115-C Convertible Coupe
|
||||
---|---|---|---|---|
Webmaster
|
Based on some notes written on the shocks, I'm pretty sure the right shock is from a 115-C and the left shock was off of a 120-B.
Posted on: 2023/11/20 19:46
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|