Re: 1948 Henney hearse wheels needed
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Funnily enough this is a common enough occurrence that Ross was delighted when I have him some spare original 55 Clipper wheels. And he has parted out many cars...
Posted on: Yesterday 16:10
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|
Re: 1948 Henney hearse wheels needed
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
***TOPIC MOVED TO POST-WAR FORUM***
Posted on: Yesterday 18:59
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 1948 Henney hearse wheels needed
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Actually not that hard to find, suprisingly, if you modify your search radar to include 37-38 Super 8 wheels.
Posted on: Yesterday 19:22
|
|||
|
Re: 1948 Henney hearse wheels needed
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I had some for sale for a long time but then decided to revive my 1951 so they got used along with a couple more that I had to buy. Try Mike Chirco at Tucson Packards and note that any 1948-1954 senior and junior Henney-Packard wheel is the same other than those used on the long wheelbase sedans. As already mentioned, several prewar models also use them.
Note also that while many 1948-1950 Wheel covers look like they should fit, not all will. Those that fit have the inner ring that is recessed about 3/8" from the outer rim and yours were probably the type with the Cloisonné emblem, PN 403031, which were used up to 1951. I have one of those and a second with the Cloisonné holes but none mint. Possible some of the non-Cloisonné too but again, none mint.
Posted on: Yesterday 20:49
|
|||
|
Re: 1948 Henney hearse wheels needed
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
Thanks for the info Don! I've already received a tip for a possible source of the Henney only wheels. Checked my parts book and confirmed that 48-54 will work, which might make things easier. Looks like you have the same "affliction" as me, dragging these old dogs out of the weeds. The only down side with finding correct wheels is I'll have no hubcaps. With the crappy Jeep wheels on it now, at least I can use later 15" Packard wheel covers. I have a dozen or more 22nd-23rd series caps hanging on the wall with the recessed inner lip that apparently won't do me much good.
![]() Steve
Posted on: Today 8:11
|
|||
|
Re: 1948 Henney hearse wheels needed
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
jeep wheels with hubcaps....That'll work. LT tires and off you go...
Posted on: Today 8:37
|
|||
|