Packard Forum Index » Project Blogs

Quote:

My earlier post has the link….the link is just before the picture. Once I found these, I found that if you do a search for “closed car door hinge screws”, there are a number of places that carry them. This was the first place I found and had about the best pricing.

Note…for the 120s, the front lower hinge screws are 7/8in including the point. These are 7/8” without the point, so they will definitely work for the front.

The rear door hinges use 1in screws, including the point. I believe these will still work since I believe the point (about 1/8in) was just to guide the screws for rapid assembly. I should have the same thread length.