Packard Forum Index » Project Blogs

Topic: 1937 138CD Limo - Birdie

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 92 93 94 (95)

Don B

Re: 1937 138CD Limo - Birdie

#941

Home away from home

Quote:

Ken_P wrote:
What’s the source, for the guy that searches door hinge screws in 10 years?

My earlier post has the link….the link is just before the picture. Once I found these, I found that if you do a search for “closed car door hinge screws”, there are a number of places that carry them. This was the first place I found and had about the best pricing.

Note…for the 120s, the front lower hinge screws are 7/8in including the point. These are 7/8” without the point, so they will definitely work for the front.

The rear door hinges use 1in screws, including the point. I believe these will still work since I believe the point (about 1/8in) was just to guide the screws for rapid assembly. I should have the same thread length.

Posted on: 4/26 21:46

1937 138CD Limo - Registry
Project Blog

Ken_P

Re: 1937 138CD Limo - Birdie

#942

Home away from home

Quote:

Don B wrote:
My earlier post has the link….the link is just before the picture.

Don, thanks. I missed the link; that's what I get for trying to read PInfo on my phone. Birdie is coming along great!

Posted on: Today 9:10

1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry

Board index » Discussion » Project Blogs » 1937 138CD Limo - Birdie

Top

Previous Topic

Next Topic

« 1 ... 92 93 94 (95)

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.