|
Re: Mojave Tan - A 1956 400 Saga
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Quote:
From actual measurements: Offset for 6" wide rims from 1948 to 1955 is 9/16" Offset for 5.5" wide rims from 1948 to 1953 is 13/16"
Posted on: Yesterday 14:38
|
|||
|
||||
|
Re: Mojave Tan - A 1956 400 Saga
|
||||
|---|---|---|---|---|
|
Home away from home
|
For the generator, next time this happens check the arm and field voltages to ground. If no arm voltage, then there is an open circuit in the armature (e.g. brushes). If there is some arm but no field, then the "voltage" contacts in the regulator are suspect. For the latter, revving the engine will boost the arm voltage with no real effect on the field unless the situation should coincidentally magically cure itself.
I'm not sure why you would have a problem with the brushes sticking. If you want, remove them and apply a thin coat of 00 grease to the sides, staying a bit from the end. It shouldn't really migrate unless you overdo it. 🤔
Posted on: Yesterday 19:48
|
|||
|
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry Email (Parts/service inquiries only, please. Post all questions on the forum.) service@ultramatic.info |
||||
|
||||
