Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Can someone tell me how to remove the starter button in my '39 Six?? A wire has come off the contact of the button, but in order to reattach it, I have to be able to remove the switch as there is zero room to get in there with a screwdriver. I have done quite a bit of rewiring work this winter and learned how to get the dimmer switch and light switch out, even making tools to be able to R&R the retaining bezels, but, for the life of me, I cannot see how the starter button comes out. Any help much appreciated - thanks. Chris.
Posted on: 2020/4/17 19:35
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
It's held in by two screws but I don't recall how to access them. You can see quite a few photos of what the uninstalled switch looks like, though on my site and maybe that will help figure it out.
Posted on: 2020/4/18 3:14
|
|||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks Don. Anybody who has worked on one of these vehicles KNOWS what a bitch it is to access up under the dash. It's hard to see and harder to reach. One thing I was thinking was that if I could remove the 'waterfall' panel it would give me a good-sized hole to get my hands in. The panel is 'loose', in that I can squiggle it back and forth about a 1/16", but not sure how to remove it. Anybody???? I thought it was probably a 'rattle-source' and should get properly tightened up anyway and would make a great access hole if I could get it off. Anybody that has done this; I would really appreciate a share here. Many thanks. Chris.
Posted on: 2020/4/18 11:53
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The 1939 Six and 1940 junior models do not have any plastic but the essential assembly is the same now that Joe has refreshed my memory! The last time I took one apart was not long after Joe bought his 1940!
Posted on: 2020/4/18 13:18
|
|||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
You went to a lot of work there, Joe. Thank you very much. Your pics 'tell a story' and I think I have an idea where to start now. I don't have a radio but I DO have a glove box, which I spent hours installing and dearly do not want to take back out. Without a radio, will I still need that side access?
I just had the driver's side dash cluster all out and R&R'd the speedometer and fixed the dash-lights dimmer switch, so really thought I'd gotten somewhere to get it all nicely back together. Then when I went to start it and pressed the button to zero effect, I knew I had a problem. Turns out when I had all the other switches out, I guess the 'U'-terminal on the starter button pulled out and has presented me with this new project. Really disappointing as I thought my hours of laying on my back with the clutch pedal trying to take my ear off, were concluded for now!! Again, thanks for taking the time to put together that response. Chris.
Posted on: 2020/4/18 13:22
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
That's only 61 years ago, Don - what's the matter with your memory?!?!? LOL Yes, you are right, those parts Joe is referring to as plastic, are metal in my car, but am presuming the method of attachment is same or similar. Don't get me wrong here, I LOVE Packard and their ahead-of-the-time engineering, etc., but geez, one would think some of this stuff could have been designed to be a little easier to get at. I mean, really, to have to take the dash apart to replace the starter button?!?!? That seems inordinately complicated to me. And trying to get washers and nuts on some of those dash studs is a job for and ambidextrous monkey!!
Posted on: 2020/4/18 13:32
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
If none of that works try a BFHammer. Always makes one feel better at the time......
Posted on: 2020/4/18 13:40
|
|||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
My memory doesn't work 6.1 DAYS ago but it is actually better for things that happened 61 years ago. I could envision the assembly much as Joe's great photos showed it but not the details of the starter switch since I wasn't specifically trying to replace it.
Posted on: 2020/4/18 13:41
|
|||
|
Re: Starter switch removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Yes Don, my long term memory is better than my short term too! I hear you. I still think that is pretty remarkable to own any car for over 60 years! And then to think the car was 20 years old when Joe bought it, and we start getting into some serious automotive history...
Posted on: 2020/4/18 13:51
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|