Re: glove box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
There are ebay vendors who make and sell them. Here is one ebay listing and you might also check with Ron Carpenter. Several have bought from him over the years and there is another restoration supply vendor mentioned later in that same thread.
Posted on: 2021/11/29 9:45
|
|||
Howard
|
||||
|
Re: glove box
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
It's not a difficult project to make a serviceable one from the painted cardboard used for package shelves.
Posted on: 2021/11/29 10:03
|
|||
|
Re: glove box
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
Last time I looked no one is making the 51-54 style glove box liners. They are folded black/dark grey thick card/cover stock and a bit of a "leather" texture if I remember right.
If someone is making them, I'd like to know. If I can find a source that stocks similar material locally, I'd have a go at it. But you have to get larger than normal sheets and find something of the right texture and color. That isn't something I want to take a chance on ordering online as a carton (500-600 pieces) on that size sheet can range from $500-$1000. If I can find it locally then I make be able to buy a few sheets, even if at a higher per sheet price. Also online, you really cant get a feel for the texture and thickness. I have an original, but it was badly soiled and spitting at the seams.
Posted on: 2021/11/30 12:43
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: glove box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
If I can find a source that stocks similar material locally, I'd have a go at it. But you have to get larger than normal sheets and find something of the right texture and color. Locally we have an artists supply and custom frame shop that stocks cardboards to be used for art projects as well as matting for photos. Most of the stock is around 3 x 4 foot sheets. This particular store has a fairly decent selection in varied finishes, colors, textures & thicknesses so if you can find a store like that nearby you might find some cardboard in reasonable quantity. Another thought is check some places that sell wallpaper or contact paper. Some of those faux leather finishes may be in a texture similar to the original and that material could be applied over regular chipboard.
Posted on: 2021/11/30 13:05
|
|||
Howard
|
||||
|
Re: glove box
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
I just remembered I had an unsoiled, but brittle liner in a spare glove box that I bought just for the script and lock parts.
It's got a leather/pebbled coated texture on the visible side. Plain flat uncoated card stock like texture on back. Approx 1/16 inch thick. The one in this box is brittle, already chipped and firmly glued in. So there is no removing it without destroying it any further. But serves as a good example of original material and construction. It's cut at an angle so the front edge sites just below the reinforcement rib on the inside of the box front.
Posted on: 2021/11/30 13:45
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: glove box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Wonder if the original might have been some of Packards "Leatherette" fake vinyl leather look upholstery that was glued to ordinary cardboard.
Posted on: 2021/11/30 13:48
|
|||
Howard
|
||||
|
Re: glove box
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
Rubbing my nail over the textured surface, it feels "papery", as opposed to vinyl or leather if that makes sense. Also, I dont see any obvious signs of multiple layers, especially where it's chipped/torn.
The rips/chips are the same ragged edges front and back. Don't see any front "layer" that more than likely would have torn a bit differently or at least separated a bit at the point of the rip/tear. So I would say it's manufactured as a single piece as opposed to another piece bonded to card stock.
Posted on: 2021/11/30 13:56
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: glove box
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
If you measure the thickness, look for leather "look" or "grain" embossed black card/paper stock and should be able to find similar. Glue, staple, seam binding construction, likely.
Paper goes by Lbs per 500 (8.5x11") sheets(ream)not thickness, so may have to convert. There's supplier charts for that. Since plastics took over, not much paper used for this. You could find some flocked sheet plastic that would look ok, that they use for glove box liners now. I have leather grained black PVC sheet that I used to use for making mud flaps, etc. so a local plastics supplier or fabricator may know where to obtain or stock. Cuts with a utility knife, glue or weld. Also, fairly easily to lay up some fiberglass and make one then paint anything you want, including flock. That's what I'm going to do when I get around to making the heater vent duct for the Caddy. Going to use the old cardboard as the mold since no one makes that part. To make one out of card board would require a big press & dies and some other tools, I don't have. Another one; measure and look at the reproduction cardboard ones that are available for other makes and models and maybe able to adapt.
Posted on: 2021/11/30 16:34
|
|||
|
Re: glove box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The reproduction 22/23 series Packard glove boxes offered by Ron Carpenter are excellent and I believe they are still available.
Posted on: 2021/11/30 16:45
|
|||
|