Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Just can't stay away
|
Will do. Thanks guys.
Posted on: 2015/11/1 11:22
|
|||
|
Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Home away from home
|
If you decide to try and drill it, use left hand drill bits. The LH motion will tend to loosen the broken part. Still, as O_D, and others have said it is a tricky procedure to do without damaging the threads in the top. If the drilling is at right angles to the top, then a drill press would be a good choice. You can clamp the top, and have straight drilling with better control than a hand held drill. Good luck.
(o{}o)
Posted on: 2015/11/1 11:34
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Just can't stay away
|
I did not know they made LH drill bits. You guys are a fountain of information. I will make a trip to Lowes after while. Thanks
Posted on: 2015/11/1 11:37
|
|||
|
Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Home away from home
|
Lowe's may not have LH drill bits. Best bet would be a machine shop or industrial supply store. Of course, the InterWeb will have them.
(o{}o) Goes without saying, but I am going to say it: You will need a reversible drill or a special LH drill.
Posted on: 2015/11/1 11:42
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Just can't stay away
|
You answer my questions before I ask them, your good. First was what an ez out looked like and if Lowes would have them, and second, if my drill on reverse would work. Now we are making progress !! Thanks. I will update my post after I aquire completion. Thanks again to everybody for the help. I hope I can help in return sometime.
Posted on: 2015/11/1 12:15
|
|||
|
Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Home away from home
|
Take it to a local machine shop. They should have the tools and know how. If you mess up, well...
Posted on: 2015/11/1 13:12
|
|||
|
Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild
|
||||
---|---|---|---|---|
Just can't stay away
|
GOT IT !!! It is out, cleaned up the threads and have the new piece in. Carb is all back together and ready to go in tomorrow, if its not still pouring the rain like they are calling for. Thank you everyone for the help and information. Now lets hope it works.
Posted on: 2015/11/1 21:18
|
|||
|