Re: vacum canisters for 1940 convertible top
|
||||
---|---|---|---|---|
Forum Ambassador
|
The cylinder seals are probably just begging for something to lubricate the piston seals; if original they may well be leather and Neatsfoot oil was the classic of the time though were it mine I'd probably use something modern like Mobil's vacuum pump oil - same stuff I use in the vacuum brake booster system on the '34.
Posted on: 2015/9/21 12:06
|
|||
|
Re: vacum canisters for 1940 convertible top
|
||||
---|---|---|---|---|
Just can't stay away
|
thank you for the advice. have you ever taken the vacuum cylinders apart? Is it best to just put some oil on the shaft or try to lube the leather? Thanks again. Vin
Posted on: 2015/9/23 15:55
|
|||
|
Re: vacum canisters for 1940 convertible top
|
||||
---|---|---|---|---|
Not too shy to talk
|
Same problem, looking to replace the Leathers and wipers any parts out there and or where to go.?
Have 1940 110 Convertible
Posted on: 2020/1/16 9:37
|
|||
Paul Shrop
|
||||
|
Re: vacum canisters for 1940 convertible top
|
||||
---|---|---|---|---|
Home away from home
|
The shafts were rusted on my 42, and I had to have new ones made. I sanded the inside of the cylinders and replaced the leather with some Elk hide I had, also as I remember I replaced the shaft seals with modern seals. O-D has the right idea on the oil. Not hard to rebuild, but would first just lube as O-D suggested.
Posted on: 2020/1/16 17:51
|
|||
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|
Re: vacum canisters for 1940 convertible top
|
||||
---|---|---|---|---|
Not too shy to talk
|
I have the same Can's, leather wipers, going to replace them with the Electric one's Vac system was very slow.
Posted on: 2021/9/7 19:35
|
|||
Paul Shrop
|
||||
|
Re: vacum canisters for 1940 convertible top
|
||||
---|---|---|---|---|
Forum Ambassador
|
going to replace them with the Electric one's
Just curious if you meant you are thinking of converting to hydraulic cylinders with a 6v electric pump or were you going with a pair of some type one piece linear screw actuator.
Posted on: 2021/9/7 19:57
|
|||
Howard
|
||||
|