Packard Forum Index » V-8 (1955-56)

Topic: 55 Packard Caribbean double reinforcement

Bottom

Previous Topic

Next Topic Register To Post

Mathew Rattray

55 Packard Caribbean double reinforcement

Home away from home

Hi All,

When I was under my 55 Packard Caribbean I noticed that the chassis had been double reinforced the whole length of the car body down both sides of the vehicle with a thick bit of metal. I was wondering would this have been done by the factory for strengthening or could this have possibly been done later?

Many thanks,
Mat

Posted on: 2009/2/4 19:23

HH56

Re: 55 Packard Caribbean double reinforcement

Forum Ambassador

Any chance the reinforcements are like this?

https://www.packardinfo.com/xoops/html/downloads/STB/55T-27.pdf

Posted on: 2009/2/4 19:33

Mathew Rattray

Re: 55 Packard Caribbean double reinforcement

Home away from home

Thanks for that info I'll check today and post my results. The car is 1 hour away getting some work done on it, but i'm going to see the mechanic today.

Posted on: 2009/2/4 19:44

Owen_Dyneto

Re: 55 Packard Caribbean double reinforcement

Forum Ambassador

Are you sure what you're seeing isn't just the standard frame reinforcement used on convertibles?

Posted on: 2009/2/4 21:05

Randy Berger

Re: 55 Packard Caribbean double reinforcement

Forum Ambassador

As Owen suggests it is probably the Caribbean convertible reinforcement that you are looking at. There is also a stiffening channel that is located just inside the rocker panels and for that reason the body struts do not come straight out from the frame, but drop down to accomodate the channels. The X-member is also reinforced, top and bottom, with plate steel.

Posted on: 2009/2/4 21:13

Mathew Rattray

Re: 55 Packard Caribbean double reinforcement

Home away from home

It could possibly be the convertible reinforcement which would make sense. I just wasn't sure if they did reinforce the chassis that way or not

Posted on: 2009/2/4 21:38

Joel Ray

Re: 55 Packard Caribbean double reinforcement

Home away from home

The plates were definately done at the factory.

Posted on: 2009/2/5 19:16

Let the ride decide

Re: 55 Packard Caribbean double reinforcement

Home away from home

Aren't all the 51-56 convertible frames reinforced this way?

Posted on: 2009/2/7 0:57

55PackardGuy

Re: 55 Packard Caribbean double reinforcement

Home away from home

I thought the Caribbean was not assembled on the regular factory line, but in a specialty shop. Or was that just the finishing touches?

Posted on: 2009/2/8 21:17

Guy

[b]Not an Expert[/

Owen_Dyneto

Re: 55 Packard Caribbean double reinforcement

#10

Forum Ambassador

Only the 53 Caribbean was built at an outside facility. 1954, 55, and 56 were regular factory production though no doubt somewhat off-line in some respects.

Posted on: 2009/2/8 21:24

Board index » Discussion » V-8 (1955-56) » 55 Packard Caribbean double reinforcement

Top

Previous Topic

Next Topic

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.