1957-58 (57th->58th Series) - FLIGHTOMATIC
|
| Subject | Application | Document |
Band Adjustment slippage, rear clutch failure - linkage/band adjustment, pressure check | 57th | |
Band Slippage - Erratic Shift Pattern loose control/regulator valve - torque specifications | 57th | |
Bushing, Transmission Front Case serviced separately from case assembly- replacement procedure | 57th-58th | |
Clutch, Abnormally Slow Engagement of Front and Rear fails to engage at idle - diagnostic procedure | 57th-58th | |
Control Valve: Shop Manual Correction valve plug misidentified - text, illustration | 58th | |
Control Valve: Valve Body-to-Front Servo Tubes bent tubes distort valve body - sticking valves, servo leaks | 57th | |
Converter: Assembly - with Supercharger new copper-brazed impeller vanes - identification | 57th; 58L-K9 | SSB No. 336, p. 3 |
Converter: Field-Returned unnecessary replacement - better diagnosis | 57th-58th | |
Converter: Return Parts Identification Tag - Proper Completion reason for failure | 57th-58th | |
Front Pump Stator Support and Backing Plate, Use of rather than complete front pump assembly | 57th-58th | |
Inspection Hole Cover matched to floor covering - production change, field installation | 58th | |
Oil Cooling Unit Leaks check for high pressure, return restriction, inspect regulator valve | 57th | |
Oil Pan Damage valve body distortion/sticking valves - use proper jack/cradle | 57th | |
Oil Strainer Assembly improved design, interchangeable - serial number reference | 58th | SSB No. 336, p. 11 |
Rear Extension Housing Bearing Removal insufficient depth for tool - loosen housing | 58th | SSB No. 336, p. 4 |
Selector/Steering Bind sterering not recovering, transmission selector sticking - steering gear/frame alignment, bent steering post | 58th | SSB No. 336, p. 2 |
Service Parts model-specific parts | 57th | |
Tool No. J-4830-01, Essential Service extension housing seal and bearing remover - inspection, replacement | 58th | |
Valve Buzz highly aerated oil - checks for internal leaks | 57th-58th | |
Valve Springs - Control and Pressure Regulator Valve Assemblies identification chart - dimensions | 57th |
SC = Service Counselor | SL = Service Letter | STB = Service Technical Bulletin | SSB = Studebaker Service Bulletin |
NOTE: These PDFs were created from High Quality Scans. It is recommended that you Right Click on the link(s) above and do a "Save Target As". This will download the PDF to your machine rather than trying to open and view it over the web.
Disclosures & Disclaimers
Though previously published elsewhere, this work is provided with my full permission for display on the PackardInfo.com website and the personal use of visitors to that site. Any other unauthorized use, however, is expressly prohibited and may be subject to prosecution.
Also, because this index was compiled from documents published by the factory, neither the author nor PackardInfo.com are responsible for errors in content arising from source information.
