Re: Frame swap under '49 Custom 8?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I mean you can fix these up for cheaper than you may think. If you tear into it enough and get some miles on it, you should be able to trust it pretty well. Ross has put close to 100k miles over the last 20 years on a couple cars not much different than yours.
Considering getting a donor rolling chassis and installing it would itself be a lot of expense and work.
Posted on: Today 10:43
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|
Re: Frame swap under '49 Custom 8?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
A lot of work for a vehicle that drives like an old Ford or a pick-up truck
Posted on: Today 11:22
|
|||
|
Re: Frame swap under '49 Custom 8?
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Cannot help with any frame suggestions and have never been around a frame swap to know all the ins and outs or limitations. Depending on how hard it will be to change the driving position, one thing I think you might need to consider is wheelbase and in particular where the front tires will be on whatever frame you find to sit under the Packard body.
Prior to 1951 almost all Packard bodies for the various 120" and 127" wheelbase 6 passenger models were the same with trim being the main differentiator. With the exception of the long wheelbase limo and 7 passenger models which did stretch some behind the front seat, the wheelbase differences between various other models were ahead of the cowl. I believe you will need to take that into consideration and make sure to find a frame that will accept the longer front fenders on your 127" Custom. I think trying to slide the Packard body back farther than the original body to accommodate the front fenders will wind up being a huge amount of extra work -- and that is presuming the rear axle would wind up in a workable location.
Posted on: Today 11:40
|
|||
Howard
|
||||
|
Re: Frame swap under '49 Custom 8?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Why not just drive the modern car as it is and save yourself a tremendous amount of work and even more expense? Making it look like a Packard won't make it one so defeats the purpose.
Posted on: Today 12:07
|
|||
|
Re: Frame swap under '49 Custom 8?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
PDon above is right. It's no more "time and expense" to create a Frankencar than the real thing. If you just want an "old timey" ride, buy a used PT Cruiser. This is a site for those who want Packards, not F-150s or Crown Victorias.
Posted on: Today 13:06
|
|||
|
Re: Frame swap under '49 Custom 8?
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Quote:
Okay, I new some of you were going to hate my idea. Here's the thing. I got the car missing two brake drums, one front, one back. (the previous owner was apparently mid brake job when he expired) Two drums are going to cost me $500 and still need to source all the other brake parts as they are missing. wiring is crumbling. Got the Engine running, (still needs a decent carburetor rebuild to make it run well but it runs and doesn't knock or smoke. I'd at least like to upgrade the front suspension to power rack and pinion and disk brakes.
Posted on: Today 15:05
|
|||
He who is without oil shall throw the first rod
Compressions 8.7:1 '49 Custom Eight |
||||
|