Re: Regulator
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I may have a Delco regulator I can sell from a '52 200, PM me if interested
Posted on: 2019/8/14 0:01
|
|||
1951 200 Deluxe Sedan Valiant Green Metallic
Vehicle #:2462 8372 |
||||
|
Re: Regulator
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi Brian.
My 53 clipper is converted to 12 volt, and I have been running this electronic voltage regulator for two years with good results. I think they have a 6v version also. clover VR Since you asked about an electronic vr. Hmm, I can't seem to access the clover systems website. don't know if they are still in business.
Posted on: 2019/8/14 0:28
|
|||
1953 Clipper Delux Club Sedan, 1953 Caribbean, 1969 912, 1990 Miata
|
||||
|
Re: Regulator
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Unfortunately Clover is no longer in business due to health issues. However, Precision Power, Inc. can restore your original regulator (and generator) to like-new condition but with solid state internals and they can even increase generator and regular output. I'm having the one done in my 1954 Patrician to 55A and a steady 7.5v at idle to handle 6V LED headlights.
Posted on: 2019/8/14 12:38
|
|||
|
Re: Regulator
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Hi I contacted Precision and they wanted over 600 to convert regulator, more than I'm willing to spend. Does anyone have a part number of one that will work. I have been looking and I get conflicting info, one site says it will work another says it won't. I would still like to go solid state if possible and it does not have to look like original Thanks.
Posted on: 2019/8/25 11:42
|
|||
Thanks Brian
|
||||
|
Re: Regulator
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The conflicting information can come from whether you have Autolite or Delco-Remy. Be sure first which you need, then base your questions and search in that.
Posted on: 2019/8/25 11:49
|
|||
|
Re: Regulator
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
No, an Echlin VR 23 is not correct for your car. The correct Echlin regulator for a 1951 200 with Delco generator is a VR 57.
PS, if you can't get the correct regulator from NAPA, you might see what Kanter has. Last time I needed one Kanter was less expensive than NAPA.
Posted on: 2019/8/25 12:37
|
|||
|
Re: Regulator
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Pay attention...Owen knows! He has helped me a great deal over the years...Ernie in Arizona
Posted on: 2019/8/25 12:54
|
|||
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' ![]() |
||||
|