Packard Forum Index » Project Blogs

Monday 17th September 2012

After suffering at the hands of my Packard yesterday it was a relief to take refuge in the workshop today. Maybe I should rephrase that, as I'm being grossly unfair to the Coupe. Instead, I'll say that in a contest between my head and a boot(trunk) lid corner my head lost! At the Burwood Spring Festival yesterday instead of carefully extracting the folding furniture from the boot(trunk) I dived in with disastrous consequences, see this album! Luckily, besides bleeding extensively, no major damage was done to either head or Packard and fortunately St John Ambulance were on hand to patch me up.

Safe today in the confines of the workshop turned instead to something that usually doesn't cause me much pain, painting! After a session in the blasting cabinet painted Noel's lower radiator tube as well as the steering box parts. And Noel, I'm sad to report that, like the Henry Ford saying of "Any customer can have a car painted any colour that he wants so long as it is black" your lower radiator tube is now black! The '33 was also started up but still needs to have the points synchronized. There are also issues with the carb and all these will be addressed once it's in the workshop. Speaking of which, Wade has mounted the one year only fuel pump on the 356 so it's ready to fire up! Also saw the wiring harness for Noel's Coupe, doesn't look pretty. With most of the connectors cut off doesn't have much going for it. Cleaned up the fuel and vacuum line fittings, after Wade had cut them off the old lines, in preparation for the new fuel line and vacuum lines required for Noel's chassis. Once the chassis is running it'll be off to Quikfit Mufflers at Gladesville for Tony to tweak the exhaust system. Then it'll probably be placed in storage in my garage at least until Noel returns from HIS Hershey trip. Wade rang Hills Radiator Service about Big Reds radiator and it's ready to be picked up. Also called Restrip about the'33's fuel tank. The boss there was pretty sure it was ready but, without his right hand man who was off sick, couldn't find it! The boss is going to call Wade back once he does locate it. And seeing Hills Radiator and Redistrip are in close proximity it makes good sense to pick them up in one trip rather than two.

Also had a call from Chris, Starliner, who was at the the Burwood Spring Festival yesterday. He's taking me up on my offer to see if I can find some Packard parts for him while I'm at Hershey next month, in this case hubcaps for his '48 Woodie. Chris is going to call into the workshop on Wednesday with a sample, measurements and pic's so I know what I'm looking for, it helps! Believe they are the dog dish type and not the full wheel covers.

Attach file:

---

  (31.81 KB)


  (34.98 KB)


  (43.91 KB)


  (45.69 KB)


  (48.97 KB)


  (53.75 KB)

Tuesday 18th September 2012

Not Wade's Workshop today but Mal's Garage! In preparation for the arrival of Noel's '41 160 Club Coupe chassis had to clear the build up of "stuff" so it'll fit! The garage itself is a tandem but has another large room out back which could be used as a triple if the dividing wall were knocked out.

Attach file:

---

  (44.01 KB)


  (45.10 KB)


  (41.80 KB)

Finally!! A garage that looks like mine.

Don't know what I'd do in one of those organized pristine garages with clean workbenches where you could actually see and find something you laid down the first time you went back and looked for it. Now I won't feel so bad and worry about getting it cleaned it up before you come visiting next month.

Howard,

Hey, who are you calling "Pristine"? Watch it fella!

Seriously, I was fortunate when I bought the house. The garage is only a 20'x20' suburban type, but it does not have any appliances or equipment in it. I have full use of the space.

The house came with a large storage shed in the backyard. This is where all the yard tools and 'overflow' go. Periodically, I need to go into the shed and do what Mal did to his garage. I do this when I can no longer get past the door. We all have to have our "McGee's Closet", mine is the shed.

Others may want to share photos of their garages too. Could be an interesting thread. Let's see'um.

Take care,

(o[]o)

Attach file:

---

  (40.42 KB)

Wednesday 19th September 2012

Before leaving home to head to the workshop Had a call this morning from Wade. Tony from Quikfit Mufflers at Gladesville had called Wade because Noel's '41 160 chassis was ready to be picked up. Wade had taken the chassis over yesterday and Tony had finished massaging the exhaust to fit including shortening some pieces and rebending others as well as fitting the exhaust pipe hangers. Wade needed to know if I'd be in soon, but I wouldn't. So Wade took off and picked up the chassis, which was aboard the shops car trailer, and returned with it to the workshop. In the meantime, after my arrival at the workshop, discovered that yesterday Noel had brought in his "K" steering wheel and that the steering column outer case and gear linkage had been disassembled with some parts cleaned while others hadn't been. But Wade's arrival with the chassis prompted some manual labour in order to get it off the trailer and back into the workshop, where it once again resides.

Shortly after the chassis was back inside Chris, Starliner, arrived. Since my offer 3 days ago, to look for '48 Packard hubcaps for him while I'm at Hershey, the shopping list together with accompanying photos complete with dimensions, has grown to also include Studebaker hubcaps and various Packard body trim pieces.
Phew, looks like many a metal detector will be set off on the trip home! No problems though, it's all for a good cause! Shortly after Chris's departure Noel arrived, not with a shopping list, but with parts for his '41 including the long awaited rubbers for the radiator collar/mudguard(fender) bracket stays and the original "T" steering wheel from his '41. And seeing Noel was there the chassis was brought to life for the first time. Slow to start, took a number of attempts before it fired. First running with a lot of hydraulic lifter clatter but once they "pumped up" settled down to a nice even tone. Then mild panic, fuel was flooding from the carburettor! Shut down, it would have been anyway because there is no water in the system yet, and mopped up. The carb may be taken back to the rebuilder, Tim of Carburettor Service Company, for diagnosis and adjustment. Needless to say Noel was pleased, as was Wade, that it runs again! Also discussed the contingency plans Noel has for storing the chassis while he's at Hershey. Wade has some doubt about getting it into my garage which is up a sloping driveway. Whatever happens, Wade will have workshop space for at least a month!

Then, after Noel's departure, I started cleaning the rest of the steering column parts. While I did that Wade took off to ABC Bearings and procured a seal to replace the one from MAX that did not fit. On Wade's return the steering box was reassembled and refitted to the chassis. Speaking of steering, yesterday Wade had also assembled the cross link to the pitman arm, so the chassis is getting closer to rolling AND steering besides running.

Left things there for the day with Wade taking an early mark to prepare for an early, very early, morning departure tomorrow for the Historical Radio Society of Australia 30th Anniversary Radiofest. Besides Packards, vintage radios being Wade's other passion.

Other matters of note:

1) Wade heard from Redistrip, they'd found the '33's fuel tank but wanted to give it more time. Apparently they are pleased with it's exterior but not so with the interior. Suits Wade, because in conjunction with his HRSA trip a few other matters require his attention early next week. Accordingly Wade wont be back in the workshop till next Wednesday.
2) Also heard from Dave the engine builder at Tamworth. Big Red's engine is progressing well with the short block assembly complete. Now working on the intake and exhaust manifolds. So at some stage next week Wade will probably go to Tamworth to pick up the finished product.
3) Wade set me a homework task for while he's away. Identifying characteristics of some of the parts of the chassis's steering column. But, how am I to do that? By observing the features in question on my '41 and reporting back. Hope I get a pass mark.

Attach file:

---

  (28.73 KB)


  (34.16 KB)


  (24.47 KB)


  (30.10 KB)


  (48.57 KB)


  (55.93 KB)


  (38.05 KB)


  (37.75 KB)


  (26.38 KB)


  (21.78 KB)


  (37.28 KB)


  (32.39 KB)


  (22.52 KB)


  (27.80 KB)


  (40.30 KB)


  (17.66 KB)


  (25.14 KB)


  (35.40 KB)


  (41.98 KB)

Friday 28th September 2012

Finally, after waiting for the stars to align, it was back to the workshop today. But only in a drop-in capacity as I went and donated blood plasma first, with Noel's emailed words accompanying me of "Please be sure to give your blood to the Red Cross and not to the Packard this time!" And no, it wasn't really necessary for the stars to align, just necessary for Wade's schedule to afford him the opportunity to return to the workshop. On the way in this morning Wade had picked up a 1 litre can of paint, along with two spray cans of the same, matched to the paint left on Noel's "K" steering wheel hub. Wade had also heard from Dave at Tamworth, the engine builder. Big Red's heart is ready to return and so Wade is heading to Tamworth next Wednesday to pick it up.

Then the real reason for my drop-in arrived, Noel. Noel had some ideas for the movement of the chassis to my garage or, as an option, his garage with Fleurette instead coming to my garage. However Wade was adamant! That is, adamant, that it was OK for the chassis to remain in the workshop while Noel was away! Once Big Red's engine returns Wade is devoting his full attention to getting her back up and running! Once Big Red is operating again she can go home to a nice snug garage and Noel's chassis can go on the hoist. Space will then be freed up for the other Packards almost lining up at the door waiting to get in! Noel's mate Tony also came in with Noel anxious for wanting Tony to enjoy and see the 356 running. Reason being Tony has devoted a lot of time and effort for Noel in doing the bodywork and any number of other things. But prior to Noel's arrival there was a test fireup, not successful because of a lot of flooding from the leaking carb. But oil pressure was noted as good on being cranked over. So when Tony arrived another attempt. Did start, using start you b@$#@rd, but wouldn't keep running because of the serious flooding. So the carb was removed to be dropped into Tim at Carburettor Service Company, the carb rebuilder, by Noel on his way home.

Another matter that had come up was The Fossils bonnet(hood). Steve had straightened and painted one side of the top panels and then obtained the other side from Wade. Unfortunately or fortunately, depends on whether you're a glass 1/2 empty or 1/2 full type, Steve found a bubble in the paint of the other top panel! Now that needs to be stripped back and repainted. In light of that Steve gave The Fossil a close going over and can't find any further bubbling or other faults evident. Phew!

Next Tuesday, it being a public holiday here on the Monday, I had planned to be at the workshop but it's not going to be. I'd forgotten that my wife and I had been drafted for baby sitting duties of our granddaughters, our daughter is expecting with the birth of a grandson imminent. On Tuesday Wade is going to pick up Big Red's radiator as well as the cleaned out fuel tank for the '33. However I will try and make it into the workshop at some stage on Tuesday, babysitting permitting. For one thing I need to collect The Fossils wiper motors which are accompanying me to Hershey and deposit them with Ficken Wiper Service for rebuild. If not the Tuesday I'll definitely be there at some stage on Wednesday, while Wade is at Tamworth, and can pick them up then. And Thursday, that's departure day for Hershey, so my focus will be elsewhere. Maybe while I'm away Wade could make a brief post here now and then? Wade? Photos even? Anything?

Attach file:

---

  (33.95 KB)

Friday 12th October 2012 - US time in Hershey Pennsylvania.

Received an email from Wade saying in part "...As far as Big Red goes, the engine has been cleaned and I finished painting all the parts today. Will now start to finish the assembly. The engine looks great..."

Good to see life in the workshop goes on!

Saturday 13th October 2012 - US time in Hershey Pennsylvania.

Tried to do this early today but, between packing, both parts and personal effects, ran out of time. Wade has been kind enough to pick up the running as shop photographer, on a limited basis, and provided the commentary below as well as the pic's.

"...Just a couple of shots to show that I was telling the truth, it really is coming together. Caught up with your Hershey adventures today and was amazed to see that you even found the door sill trims for me...."

Attach file:

---

  (47.10 KB)


  (37.48 KB)

Friday 19th October 2012

Called into the workshop bearing the sill plates for The Fossil, also some too short Trippe light bracket bolts and some clips for Barry Smith's '51 Convertible. Wade is still in the midst of preparing Big Red's engine prior to it's reunification operation. A lot of time consuming and necessary tasks to ensure it's a once only operation. Also phoned Chris, Starliner, regarding the parts bought for him at Hershey. Brought 2 things of his home with me, a hood ornament and a rear window trim piece. The rest is coming by boat and is scheduled to arrive before Christmas.

Attach file:

---

  (43.65 KB)


  (49.03 KB)


  (17.64 KB)


  (25.36 KB)


  (33.15 KB)


  (19.93 KB)


  (15.95 KB)

Tuesday 22nd October 2012

Been a while, but back in the workshop today getting my hands dirty. And that's about all I did, while Wade installed parts I held a shop light, passed tools and generally 'go-fered'. The engine was in when I arrived and the grill, radiator and bonnet(hood) had also been installed with help from Graham over the last few days. Wade was just finishing off installing the fender beading for the grill and buttoning that up. The front bumper was then re-installed, and the lower radiator hose, and the generator and fanbelt, tensioning same. Next checked under car and re-installed the engine splash shields. The front wheels went on temporarily and Big Red was dropped to the workshop floor for the first time since mid April. The upper front suspension pins were then tightened with weight on them then back in the air, wheels off, further tightened and split pins installed. Wheels back on, dropped to floor again, all lug bolts tightened and hubcaps on. At this point work came to a close because the oil Wade had ordered hadn't yet arrived, but should be here Thursday afternoon. Still some work to be done once the oil is to hand with the top parts of the engine not yet re-installed. Reason being Wade wants to fill with oil then turn the engine over without the head on to ensure oil is thoroughly distributed to the moving parts and that it has oil pressure. Left it at that but will return Thursday, Wade's not in tomorrow, when first thing we'll do is pick up Richards '39 Convertible Coupe from Les who has finished the rust repairs on it. Might be a tight squeeze fitting it into the workshop Noel but I have been assured your chassis won't be kicked out into the cold!

Attach file:

---

  (32.63 KB)


  (19.75 KB)


  (41.04 KB)


  (43.41 KB)


  (38.02 KB)


  (35.96 KB)


  (34.38 KB)