Packard Forum Index » Post-War (1946-54)

Topic: Bell Housing and Transmission Color

Bottom

Previous Topic

Next Topic Register To Post

jerbear

Bell Housing and Transmission Color

Just can't stay away

For a 1953 Packard Caribbean, what is the proper color for the bell housing and for the transmission (three speed manual with overdrive)? Thanks.

Posted on: 2013/2/17 23:10

BigKev

Re: Bell Housing and Transmission Color

Webmaster

Packard Grey. Same as all 51-54 motors except the '54 359 motor which was bronze.

Posted on: 2013/2/18 10:25

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

jerbear

Re: Bell Housing and Transmission Color

Just can't stay away

Thanks. That's what I anticipated until I found the black on the bell housing and blue on the transmission.

Posted on: 2013/2/19 13:08

Caribbeandude

Re: Bell Housing and Transmission Color

Home away from home

BigKev is correct, grey was the original color

Posted on: 2013/2/19 13:31

James Russell Packard III

Re: Bell Housing and Transmission Color

Home away from home

i would assume that to see the correct color go to BigKev blog.

packardinfo.com/xoops/html/modules/newbb ... lat&order=ASC&type=&mode=0&start=30

which is very fine read i may add

Attach file:

(30.54 KB)
1374_5123ff237aeb8.jpg 500X375 px

Posted on: 2013/2/19 17:39

David Grubbs

Re: Bell Housing and Transmission Color

Home away from home

Owen mentioned the use of a manifold wrench in BigKev's blog.

"A standard "manifold" wrench does the trick on those two lower manifold studs"

For the sake of us young (right!) guys, where does one get a manifold wrench and what does it look like??

Posted on: 2013/2/19 21:16

Owen_Dyneto

Re: Bell Housing and Transmission Color

Forum Ambassador

Manifold wrenches are available from Craftsman, Proto, S&K, and probably all the other good tool sources. The enclosed listing is from the MSC Master Catalog. If you prefer McMaster-Carr, just look in the index under "manifold wrenches", in Catalog 111 they are on page 2600.

Attach file: