Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
-----from your description it reads like one could be easily made from either square section or round rubber product. There are 1" and 3/4 square rubber tubes which would be close in OD but the ID is round with thick walls so inside is comparatively small to the OD. There is a square sided U channel with almost perfect outside and thickness dimensions but no 4th side. Had thought of trying to do something with that by cementing on a couple of small square strips to the open edge. Not sure how well that cement would hold so kind of ruled that out. Have made silicone molds for my door sills and my version of the prewar AC vent and recently for an actual prewar vent and for postwar outside air vents and the gaskets for those so might try that terminal cover too. Am thinking unless someone has a better source of extrusions it should be possible to cast something with Urethane rubber. A simple shape so probably could be made using square plastic tubing for a pattern and then silicone again for the mold.
Posted on: 2016/3/26 16:10
|
|||
Howard
|
||||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
With my poor english, I can't really picture the part in my mind!
O_D, if I could take your offer to send pics, I would certainly appreciate it. I guess posting them here would be best as it is several of us talking about it, but if you prefer to email them, my email is: vmilke at nutryplus dot com Thanks!
Posted on: 2016/3/26 19:13
|
|||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I think this little sketch may help you visualize it better than a photograph. Material is black rubber, probably extruded.
Posted on: 2016/3/27 9:10
|
|||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Wonderful! Thanks, O_D!
Interesting to see an American using metric system... which of course simplifies things for me a lot! Thanks again, victor
Posted on: 2016/3/27 9:22
|
|||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
You are more than welcome, I thought metric would be easier for you, almost 40 years in the chemical industry with plants around the world and it's almost 2nd nature to me.
Posted on: 2016/3/27 9:45
|
|||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Posted on: 2016/3/27 16:01
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quite the opposite, thank you all for keeping these great forum which is invaluable help!
Posted on: 2016/3/27 16:08
|
|||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Hi, where did you find the chassis number on the chassis ?
here in Belgium, they want that the number must be writen on the chassis frame ... but I don't find it. Thanks for help.
Posted on: 2016/3/30 8:49
|
|||
1956 Four Hundred - mostly original
1956 Caribbean hardtop project car 1958 Cadillac Eldorado Seville |
||||
|
Re: 1956 Caribbean hardtop options on a Four Hundred
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
There is no chassis number. Packard stopped using them sometime in the 20-30s. The only numbers on a 56 will be on the door jamb, the engine, and the embossed number on the firewall above the heater.
In 56 the door jamb vehicle number is the important one and is the number the car was registered under. If it has the original engine the same number will be stamped on the top of the engine block in a flat surfaced area between the oil fill tube and left head. If it is a very late 56 production the engine number may be facing forward on the front edge of the block just below the right head instead of on the top. The embossed number above the heater was called the body ID number and is often referred to as the theft proof number today. There are almost no factory records to be found saying what body ID number was on a car along with a specific door jamb number.
Posted on: 2016/3/30 9:37
|
|||
Howard
|
||||
|