Re: 1940 Backup Light Switch
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
On Clipper bodies and following years, it is at the base of the steering column just above the steering box on a bracket attached using the hardware holding the bottom support for the shift tube. 40-42 conventional bodies may be the same. If so, look for a rectangular box with a plunger that is pushed in by the bottom R-1 shift lever when reverse is selected.
Posted on: 2021/10/13 13:37
|
|||
Howard
|
||||
|
Re: 1940 Backup Light Switch
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
This may help
Attach file: ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2021/10/13 14:47
|
|||
|
Re: 1940 Backup Light Switch
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Great PICs!
I had the bkup and throttle switches confused. Thanks.
Posted on: 2021/10/13 20:01
|
|||
|
Re: 1940 Backup Light Switch
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Throttle switch? 1941 and other years with ElectroMatic Clutch may have had a throttle switch but I have no idea what that might be on 1940 unless you mean the overdrive kick down switch.
Posted on: 2021/10/14 13:44
|
|||
|