Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I’ve rebuilt several starting when I was 16 back in the ‘60s and they are not difficult. I even have a new set of +.030 pistons at my shop that I will probably never use. Just got them and haven’t checked to see if rings were included or not. Check the vendor directory for parts sources.
Posted on: 2022/1/5 19:30
|
|||
|
Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
Just be sure and find a real good machine shop that will be accurate on the crank turning, so get your brgs and have the rods redone so the crank clearances can be set correctly. . Also figure on having new exhaust seats installed.
Posted on: 2022/1/5 21:47
|
|||
|
Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I did the valves on my '37 115c.
The engine was a joy to work on. I have a '40 110 with a bad engine, and will be doing a transplant from a '47 into it, and then probably rebuild the '40 because it's fun. I echo the comment above--you need to find a competent machine shop for quality work. Assembly though should be quite straightforward. I look forward to working on flatheads. I did a couple of Ford 8N's and they were also great fun to work on. A suggestion: Start a project blog and document the work you're doing. There's lots of attention paid to the eights and of course the twelves, but no one ever seems to take the time to document the rebuild of the six.
Posted on: 2022/1/5 23:13
|
|||
|
Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
Thanks for the reply mate, I haven't measured up the bores as of yet so we're not sure about what oversize we need.
Posted on: 2022/1/6 2:43
|
|||
|
Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
Thanks mate. I'm new to this forum posting thing but I will do a project log once I work out how to submit pictures.
Posted on: 2022/1/6 2:45
|
|||
|
Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
There is a thread here that explains how to upload photos. Once you’ve done it a couple times, it’s actually quite easy.
Posted on: 2022/1/6 12:54
|
|||
|
Re: 1939 1700 series "6" full engine rebuild.
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
G'day MattyB,
![]() I also invite you to include your '39 Six Touring Sedan in the Packard Vehicle Registry.. Last, but not least, if you're not already a member of the Packard Automobile Club of Australia I also invite you to join the club. Link to PACA Website.
Posted on: 2022/1/7 16:26
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|