120p400	Re: 1938 Packard 110 ID plate tag decal on firewall	#11
Not too shy to talk Joined: 2008/7/11 19:30 Last Login : 2018/6/28 19:04 Group: Registered Users Posts: 23	Hi Tom, thank you for the 38 Super 8 plate photo! It appears the plate may have a more permanent printing or embossing for the model/serial space. Is it too much trouble to get a close up of that space? Yours looks like 110X? Does this indeed look like a water-slide decal? thanks Craig Attach file:   (24.63 KB) Posted on: 2009/3/31 3:31

120p400	Re: 1938 Packard 110 ID plate tag decal on firewall	#12
Not too shy to talk Joined: 2008/7/11 19:30 Last Login : 2018/6/28 19:04 Group: Registered Users Posts: 23	I thought i would copy Gerd's 38 Packard Six Conv Coupe plate photo over to this thread as well. Attach file:   (44.14 KB) Posted on: 2009/3/31 3:42

Owen_Dyneto	Re: 1938 Packard 110 ID plate tag decal on firewall	#13
Forum Ambassador Joined: 2007/3/14 18:01 Last Login : 2024/12/15 16:36 From New Jersey Group: Registered Users Forum Ambassadors Posts: 16703	What is the plumbing right next to the plate? If you're asking about the tubing in post #9 at the upper right corner of the decal, it's the capillary feed to the oil pressure gauge. Posted on: 2009/3/31 8:33

HH56	Re: 1938 Packard 110 ID plate tag decal on firewall	#14
Forum Ambassador Joined: 2007/4/20 19:54 Last Login : Today 11:37 From Fresno CA Group: Registered Users Forum Ambassadors Posts: 18884	Thanks. Figured it was something like that but the fitting thru firewall seems so big --like it's a support for something directly mounted to it. Am too used to the fairly thin tubing and gauges mounted in dash on postwar cars I guess. Posted on: 2009/3/31 8:39

tbirdman	Re: 1938 Packard 110 ID plate tag decal on firewall	#15
Home away from home Joined: 2008/6/29 22:25 Last Login : 2023/6/13 17:04 Group: Registered Users Posts: 367	On the other side of the cowl, there is also a big fitting and then the thin tubing you referenced goes from the fitting to the oil gauge. The big fitting is just to connect the thin tube on both sides. Posted on: 2009/4/1 0:53

JWL	Re: 1938 Packard 110 ID plate tag decal on firewall	#16
Home away from home Joined: 2008/2/16 18:39 Last Login : 7/11 14:33 From Santa Fe Group: Registered Users Posts: 5929	Quote: HH56 wrote: Here's a picture of general number locations (except the decal which you already have). They varied location a bit year to year but format stayed identifiable. Another member has posted a picture of an actual unreadable decal here:packardinfo.com/xoops/html/modules/newbb ... ic.php?post_id=24434#forumpost24434 Howard, the stamped plate under the Body Dash Number in the illustration looks suspiciously like a Briggs Body Number, but that could not be. (o{}o) Posted on: 2013/8/5 10:22
	We move toward And make happen What occupies our mind... (W. Scherer)

HH56	Re: 1938 Packard 110 ID plate tag decal on firewall	#17
Forum Ambassador Joined: 2007/4/20 19:54 Last Login : Today 11:37 From Fresno CA Group: Registered Users Forum Ambassadors Posts: 18884	It does, doesn't it. I don't know what to offer. In details like that on prewar cars, I'm mostly out of my element or comfort zone. Posted on: 2013/8/5 10:35
	Howard

David Grubbs	Re: 1938 Packard 110 ID plate tag decal on firewall	#18
Home away from home Joined: 2009/7/15 11:56 Last Login : 7/14 15:31 From Billings, MT, Yellowstone Group: Registered Users Posts: 1512	If someone has a replica or a very good original 39 data plate, it would be possible to take a good closeup photo of it, and make a reproduction sticker for a 38 car. The patent numbers might be a bit off, but that's one way to make a reproduction. If anyone is interested let me know. I found this on ebay, but it is obviously the wrong one for 38. ebay.com/itm/Packard-Data-Plate-Brass-19 ... D4%26rkt%3D4%26sd%3D290951954574%26 Posted on: 2013/8/13 20:50