Packard Forum Index » Project Blogs

oh no Mal....that's Mal (that's spanish)

get better soon mate (that's Australian, learned it from Fosters...Australian for beer)

Hank

Mal, I wish you a speedy and complete recovery. In the meantime keep us posted on happenings at Wade's. Take care - John

(o{I}o)

to all for your support and best wishes. BP seems more of an inconvenience than a problem but recovery is a long term matter, usually 6 months or more. With my "new look" main thing I'm worried about is scaring the grand-daughters! With regard to Peter Packard's experience I've never had a good smile so maybe this can work in reverse and improve mine?

As for the workshop, I dropped in yesterday. Showed the guys my "new look" and caught up with Wade. He was trying to install the neoprene seals to the trans top but without success. Instead switched to making some blanks from a sheet of neoprene but was having difficulty in doing that. We'll see how things have progressed tomorrow with my return to action.

PS - Still transmitting from Macca's - enjoyed the McMuffin, Hash Browns and OJ this morning, an earlier start saw improved internet speed!

Best Wishes on a complete and speedy recovery.

Mal, best wishes for a speedy recovery. Don't let it interfere with your lifestyle.
But you're like me - very little style - all determination.

Mal,

Best wishes for a speedy recovery. From your picture, you now sort of look like a pirate. Perhaps you could get a parrot?

Aaargh,

Tom

Tom,

The pictures speak for themselves.

Attach file:

---

  (23.89 KB)


  (18.07 KB)

<iframe width="425" height="349" src="http://www.youtube.com/embed/5GKneSp069g" frameborder="0" allowfullscreen></iframe>

Never give an Aussie or Gerd any extra ideas. They are inventive enough without suggestions.

Wednesday 27th July 2011

Just a "drop in" at the workshop today. Wade managed to manufacture some seals for Noel's trans top and that's all back together. And has cleaned up the R6 OD case and the OD mounting for the trans in the parts washer and re-installed the OD mounting to the trans. Now awaiting the arrival of PeterL complete with Mazda engine under one arm and R6 OD parts under the other!

Still using the Crypton Engine Analyser on Big Red. I'd previously said this ".....the CRT came to life, with one of the CRT display functions showing each cylinder firing by a sharp peak. But there were only 7 peaks, Wade thinks he has the display set "too fine" so will adjust accordingly....." Turns out, that by taking the rpm's up to about 1,000 that all 8 cylinders are shown firing. Always good to read the instructions.

And a backward step, the '38 water pump was returned! Works OK. but leaks! Turns out the weep hole had corroded to such an extent that it now wasn't sealing. Parts are back with the machinist for remedial work.

Aaaargh, Gerd me lad!

Love Robert Newton in "Treasure Island"!

As for YFAM Randy Berger, lets just say we are enjoying ourselves.

Attach file:

---

  (35.34 KB)


  (32.05 KB)


  (25.54 KB)


  (24.44 KB)


  (30.83 KB)


  (32.32 KB)


  (33.98 KB)