Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Dear Caseyjay:
Given the $1500 purchase price and the missing headliner I assume the original owner was not storing the car properly. That is a shame because the chrome, save the bumper, indicates it was in pretty good shape prior to falling into disuse. Your best bet is to put the thing on ebay. With a stuck motor it's not going to sell for very much and shipping is a big part of the equation. Other than that your pictures are a terrific reference as there was recently a big debate here about painted dashboards under the multi-toned paint options. How the bumper got cracked is another problem because those frames bend rather easily. To make 3% on your investment puts the price in the $5,000 range, but the stuck motor knocks that down. If the car was stored properly it would be at in the 20K and higher range sans the cracked bumper.
Posted on: 2012/9/21 18:47
|
|||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Thanks for the post Tim, I have a whole bag full of "if only"s. I have thought that the effort to get the motor running (even badly) might be worth a couple of K$, but alas, I have many restoration plates spinning. As too the bumper damage, it is exactly as I bought it and don't know why it is cracked. It shows no real damage around it like from a collision. My guess is the previous owner hooked the bumper on something when backing up and cracked it that way. Ken Johnston
Posted on: 2012/9/21 20:18
|
|||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I think Tim's numbers are spot on. You'll have a tough time getting $5,000 for it not running. When you say it won't turn over, do you mean it's stuck, or just that the starter won't turn it over?
Posted on: 2012/9/21 21:23
|
|||
West Peterson
1930 Packard Speedster Eight Runabout (boattail) 1940 Packard 1808 w/Factory Air 1947 Chrysler Town and Country sedan 1970 Camaro RS https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=4307&forum=10 http://aaca.org/ |
||||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
G'day Ken,
![]()
Posted on: 2012/9/21 22:40
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Thanks for the reply posts! On the subject of the engine, I could not turn it over with a wrench on the crank, but I did not try to troubleshoot it. It ran when it was shut down so it can't be catastrophic. It may require taking the connecting rod caps off and cleaning out the dried gunk. Do you think it would add a lot to the value? As for the suggestion of the registry, I will gladly do it . Ken
Posted on: 2012/9/21 22:58
|
|||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
caseyjay wrote:...As for the suggestion of the registry, I will gladly do it . Ken ![]()
Posted on: 2012/9/21 23:38
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Just assuring the buyer that the engine is free should be all you need to do. It looks like it has overdrive and the electromatic clutch, as well.
Posted on: 2012/9/22 9:52
|
|||
West Peterson
1930 Packard Speedster Eight Runabout (boattail) 1940 Packard 1808 w/Factory Air 1947 Chrysler Town and Country sedan 1970 Camaro RS https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=4307&forum=10 http://aaca.org/ |
||||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Dear Casey:
It may have gotten stuck because something was living in it. If you are really lucky you can let it soak for a couple of weeks and it will free up. Some old timers swear by Marvel Oil because it may have spearmint oil in it. It's not a hard motor to get running again. You'll have to pull the cylinder head and see what's going on. Don't try to break it free. You can then soak the offending cylinders in penetrating oil and even carefully heat the rusty areas up with a torch. Then tap with a block of wood, or pull the oil pan and replace the rings. Some people are not so lucky. I knew an old timer (Paul Lamb) who's 34 Packard got stuck because it had a cracked valve seat. He soaked it in diesel oil for months with no luck. It was a shame because it was a nice original car with a Senior CCCA badge on it. I also handled a 55 Clipper that was a collision case. Somebody at the body shop started the motor to see if it would run. The condensation then seized it solid. I serviced two frozen cylinders and it ran fine ever after. Good luck with your car.
Posted on: 2012/9/22 10:28
|
|||
|
Re: Advice wanted on 1941 Packard 160
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Thanks Everyone for your interest. I have just added my Packard to the registry. While looking through my old folder on it to get info for the registry, I came across some history. If anyone is interested, I have the original documentation that I used to get the Classis Car Club to alow the 160 model into the club back in 1975. Back then it was 180 only. I will post if this forum is interested. BTW, I think I will try the oil soak trick and give the engine another try.Ken
Posted on: 2012/9/22 11:34
|
|||
|