Rscott77x	Locking gas cap will not unlock	#1
Home away from home Joined: 2014/10/29 21:11 Last Login : 11/13 11:00 From Fwernandina Beach, FL Group: Registered Users Posts: 311	My Stant locking gas cap will no longer unlock. Of course, I need to fuel the car! My car is a 47 clipper. From what I read on the internet is that I should stick a screwdriver into the keyhole hammer it in and then rotate the screwdriver to get the cap off. Has anyone else had any experience with this problem. Any advice would be helpful. I have ordered a replacement standard cap from Max Merrit. Once it arrives I will attempt to remove the old gas cap. Posted on: 2022/10/23 9:47
	packardinfo.com/xoops/html/modules/registry/index.php?Action=view&ID=1731

HH56	Re: Locking gas cap will not unlock	#2
Forum Ambassador Joined: 2007/4/20 19:54 Last Login : 11/19 14:32 From Fresno CA Group: Registered Users Forum Ambassadors Posts: 18859	I have never tried the brute force method but before you do have you tried lubing the mechanism. Could be worth a stop at the hardware store and picking up a small spray can of 3 in 1 dry lock lube or the equivalent. Use the plastic tube in the keyhole and dose the innards. Doesn't cost much and maybe will save the cap. If it does not help then you are out a bit of time and a few bucks but no worse overall. Posted on: 2022/10/23 10:17
	Howard

Rscott77x	Re: Locking gas cap will not unlock	#3
Home away from home Joined: 2014/10/29 21:11 Last Login : 11/13 11:00 From Fwernandina Beach, FL Group: Registered Users Posts: 311	I did try some lube but will get the lube you mention today and give it a try. Howard is usually right! Posted on: 2022/10/23 10:27
	packardinfo.com/xoops/html/modules/registry/index.php?Action=view&ID=1731

Joe Santana	Re: Locking gas cap will not unlock	#4
Home away from home Joined: 2008/10/31 14:20 Last Login : Today 0:08 From Potomac, Maryland, USA Group: Registered Users Posts: 1958	Lube it. Put the key in and tap it ( not hard). Also try turning the whole cap counter clockwise as far as it will go when in place. Insert key and turn key counter clockwise. If I haven’t put the cap all the way to the right or left, the lock can lock up and the key won’t turn. Posted on: 2022/10/23 18:05

humanpotatohybrid	Re: Locking gas cap will not unlock	#5
Home away from home Joined: 2021/7/26 14:34 Last Login : Today 18:41 From Pennsylvania Group: Registered Users Posts: 2842	That's true. Make sure the cap is turned fully closed so the mechanism is not binding. I would spray in PB Blaster as my lube of choice but it won't matter much. Posted on: 2022/10/23 20:51
	1955 400 | Registry | Project Blog 1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry

BigKev	Re: Locking gas cap will not unlock	#6
Webmaster Joined: 2006/4/17 13:30 Last Login : Today 21:50 From North Aurora, IL Group: Webmasters Registered Users Posts: 11903	Topic moved Posted on: 2022/10/24 5:30
	-BigKev 1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

Tim Cole	Re: Locking gas cap will not unlock	#7
Home away from home Joined: 2007/10/28 9:49 Last Login : 2023/2/8 20:30 Group: Registered Users Posts: 2869	The hammer and screwdriver method is a car thief thing. If the lock is not serviceable use cobalt coated drill bits to remove the tumblers. Hammers will serve only to damage the tank. Posted on: 2022/10/24 9:10

Rscott77x	Re: Locking gas cap will not unlock	#8
Home away from home Joined: 2014/10/29 21:11 Last Login : 11/13 11:00 From Fwernandina Beach, FL Group: Registered Users Posts: 311	Love this answer. I was very concerned about damaging the tank. Will try other methods first!! Posted on: 2022/10/24 9:36
	packardinfo.com/xoops/html/modules/registry/index.php?Action=view&ID=1731

Packard Don	Re: Locking gas cap will not unlock	#9
Home away from home Joined: 2014/7/15 13:30 Last Login : Today 20:00 From Crooked River Ranch, OR Group: Registered Users Posts: 6194	Drilling (or hammering for that matter) might cause a spark and that’s the last thing you want in a gas tank filled with fumes! Posted on: 2022/10/24 11:48
	All generalities are false. Don Pierson Packard / IMPERIAL page CA DMV Licensed Vehicle VIN Verification 1951 Henney-Packard 3-Door Long Wheelbase Air Force Ambulance 1954 Packard Patrician 1954 Packard Patrician Parts Car 1956 Clipper Custom Sedan

BigKev	Re: Locking gas cap will not unlock	#10
Webmaster Joined: 2006/4/17 13:30 Last Login : Today 21:50 From North Aurora, IL Group: Webmasters Registered Users Posts: 11903	Most caps are held on by two tabs on the outside edge that engage the filler neck rim. The metal on caps is generally fairly thin. So you should be able to take a screwdriver or a pair of pliers and bend those tabs away from the filler neck rim, thereby releasing the cap. Posted on: 2022/10/24 13:09
	-BigKev 1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog
(1)