Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Home away from home
|
Sorry, I can't help in regard to what to use, but in my opinion, I think you're wasting your time on this.
If you want a really nice looking trunk on your car, purchase a different trunk. Really nice ones are usually available in the $300-$500 range,,, and if you get lucky, you might even find one with fitted luggage. I just sold two trunks at Hershey in pretty nice condition, one had fitted luggage. If I remember correctly, I sold the pair for $800.
Posted on: 2022/12/13 11:29
|
|||
West Peterson
1940 Packard 1808 w/Factory Air 1947 Chrysler Town and Country sedan 1970 Camaro RS packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=4307&forum=10 aaca.org/ |
||||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Forum Ambassador
|
I have never tried it but one of your countrymen has a YouTube video and says alcohol, specifically hand sanitizer, is a good solvent for hardened paint that does not damage vinyl upholstery. Other places do mention different solvents for different paints so I suppose it would be important to identify what paint was used. Still, the hand sanitizer is available and maybe worth a first try except maybe use a very stiff brush instead of a fingernail.
Can't say what material was used to cover the trunk but Packard used a material they called leatherette for interior trim in some wear areas or when the cost of full leather on a particular surface was not warranted. No idea when full on vinyl material came into wide use so the leatherette may be what is on the trunk. Perhaps the alcohol would be just as effective on it but just in case not, do try in a hidden or already damaged spot first. Here is a bit detailing the difference between vinyl and leatherette
Posted on: 2022/12/13 12:26
|
|||
Howard
|
||||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Home away from home
|
I worked in automotive plastics, including formulating vinyl, and that article's distinction is complete BS. Vinyl resin (PVC) is rigid and rather intractable. You compound it with additives to alter its properties like ease of processing, weathering, coloring, impact resistance, fire resistance, etc. If you add a plasticizer to soften it, you get flexible vinyl, invented in the 1920's. The amount you put in (up to the resin's carrying capacity) adjusts its softness. "Leatherette" is just marketing speak for flexible vinyl or I suppose other flexible plastic.
Posted on: 2022/12/13 13:56
|
|||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Home away from home
|
Mathew, I don't have own experiences. But look, what the internet says on
a) How To Remove Paint From Vinyl Floor? b) How to Remove Paint from Faux Leather?
Posted on: 2022/12/13 14:02
|
|||
The story of ZIS-110, ZIS-115, ZIL-111 & Chaika GAZ-13 on www.guscha.de
|
||||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Forum Ambassador
|
Quote:
.......and that article's distinction is complete BS But the article😀 is on the internet and everyone knows anything you read on the internet is never wrong 🤣
Posted on: 2022/12/13 14:25
|
|||
Howard
|
||||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Forum Ambassador
|
To my knowledge the fabric-covered trunks (1934 and earlier) offered by the Packard as factory accessories were branded as "K" brand or KamLee, manufactured by McKane-Lins of Milwaukee. The covering on mine and a few other earlier ones I've looked at appears to be some type of rubberoid coating calendared on a woven cotton or canvas backing. I doubt that any type of chemical or mechanical cleaning is going to accomplish what you want. I'd suggest either recovering it with some modern replacement for the original fabric, or just buying a better trunk.
Posted on: 2022/12/13 15:01
|
|||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Home away from home
|
I know that brake fluid can certainly remove paint when I don't want it to and I rather doubt it will hurt the vinyl, so why not soak an old piece of towel with it and lay it on a spot to try it out. It will take a little time.
Posted on: 2022/12/13 18:43
|
|||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Home away from home
|
There is also weak paint remover designed to remove one layer at a time. Likely automotive paint suppliers would carry it.
Posted on: 2022/12/13 19:53
|
|||
|
Re: Restoring a 1934 Packard Trunk
|
||||
---|---|---|---|---|
Home away from home
|
Thank you for everyone's input. I thought this was in better condition than my current trunk but was a bit disappointed when it actually arrived. I have nothing too loose, so I might try a few products and see if anything works, otherwise I might see about revinyling it. This did come with the luggage so at least I have that. :)
Posted on: 2022/12/14 4:44
|
|||
|