Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
Hello,
This should get you started. Follow this link and there is plenty of info here related to your question. packardinfo.com/xoops/html/modules/newbb ... flat&order=ASC&type=&mode=0&start=0 My 55 Packard 400 has this conversion and a full flow oil filter also. Picture attached.
Posted on: 2011/8/4 17:24
|
|||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
I have a similar Olds pump conversion in my 56 Executive too. It's GREAT!!! Jack Vines sells an adapter.
Posted on: 2011/8/4 17:43
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Forum Ambassador
|
G'day missedgear,
to PackardInfo. See you've been well looked after in regard to the oil pump upgrade. As a quid pro quo, could you please include your '55 Clipper Constellation in the Packard Owner's Registry here on PackardInfo?
Posted on: 2011/8/5 1:34
|
|||
Mal
/o[]o\ ==== Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
Any trouble with the pump will show up with plenty of warning in the form of clacking valve lifters, and even that can be held at bay by running a quart over full. Basically, if you have no symptoms, you have no problem. Yes, the pumps are a weak point but they can run 100,000+ miles too.
If you are having lifter problems beyond a two second "morning sickness" when the car starts after a long rest, then the Jack Vines pump conversion is very good. Don't think I would bother with with a full flow conversion unless I contemplated using the car in taxi service.
Posted on: 2011/8/5 5:44
|
|||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
I'll have to agree with Ross. If the current pump in the engine is not causing any problems then don't try to fix it.
The problem here is that we do not know why missedgear brings up the issue at all. If there is no reason to believe that that there any problems with the current pump in the engine then leave it alone. If there is reason to believe that the current pump is questionable condition then i wouldn't attempt to rebuild it. I would install the Olds pump conversion.
Posted on: 2011/8/5 7:19
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
Missedgear,
Is the pump currently removed from the engine???? OR is the engine currently running???? We need more detail as to why u asked about the pump in the first place.
Posted on: 2011/8/5 7:46
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Forum Ambassador
|
i went with a rebuilt unit, mostly because i didn't want to loose the originality of my vacuum wipers. i don't plan on driving the car daily and it wont see a ton of mileage in a year, so the original pump will serve me well.
Posted on: 2011/8/5 8:29
|
|||
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021 [url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard |
||||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
Greetings, missedgear,
As has been mentioned above, if and when you need Packard oiling system parts, send me a PM and I can discuss all the options and combinations you might need. jack vines
Posted on: 2011/8/5 9:57
|
|||
|
Re: 1955 clipper oil pump upgrade
|
||||
---|---|---|---|---|
Home away from home
|
On kevin's pic i see the CL stamped on one of the main caps that we were discussing in the other thread
Posted on: 2011/8/5 11:50
|
|||
|