|
This Packard Parts Cross-Reference (X-Ref) Database provides a resource for Packard Owners to both search Parts that may Cross Reference to either other Makes/Models of Vehicles or to readily available parts from national part stores. Packard Owners can also add to the Database for benefit of other Packard Owners.
All Parts
Part Description | Packard P/N | Packard Model | Model Years | New P/N | Brand | Vendor | Comments | Submitted by |
- | G119512 | - | - | G109461 | Packard | - | Standard 1/8 PTF grease
fitting | humanpotatohybrid |
10.5 inch V8 Clutch | - | Clipper | 1955 | CD 7951 | - | - | This it the industry code for 10.5ish clutch | 64avanti |
11 inch clutch for 55 packard | - | Jr, Senior? | 1955 V8, 56? | BBD 4216 | Sachs | - | This number should fit V8 cars but be sure to check. | 64avanti |
1937 115C rear axle inner seal | - | 1937 115c | - | 410190 | Federal Mogul | - | - | Ken P |
1955 Clipper rear seal outer | - | 1955 Clipper | 1955 | 13649 | National | - | Fits | 64avanti |
1955 Front Shock w/ TL suspension | - | All | 1955 | - | KYB KG4503 | - | Looks like '53-62 Vette, '52-56 Ford fit.
68-69 Javelin | 64avanti |
46 intake manifold | 367643 | clipper 282 cubic inch | 1941 to1947 | - | - | - | - | walterg |
4gc | - | - | - | - | - | Mikes carburetor. | Has most Packard carbs kits except
v12. | Riki |
54 327 spark plugs | - | 54 w/327 engine | 54 | 308 | Autolite | - | Autolite 308. | PackardV8 |
56 rear axle pinion seal (6484093) | 6484093 | All 56 | 56 | CR 15788 | - | - | CR 15788, Napa 15788,victor 49161, trostel 14223 dana 49161.
ID 1.5520, OD 3.1650, width 0.6650 | PackardV8 |
6 blade 17" flex fan | - | 1938 110 | 1938 | 3567 | HAYDEN | Kragen | No modifacations to cooling system-bolt on. 1 1/2 " clearance between fan and radiator. 1/4" clearance on generator pulley.Fantastic air flow. | 1938 Club Coupe |
626 bendix spring | - | 626 | 1929 | - | - | - | a V8 Ford 32-53 bendix spring will replace the original Packard by grinding a small amount off where the bolts go thru it. The Ford spring is actually better than the original Packard because it is slightly heavier made. This may work on earlier and later models with the one bolt clamp in starter. | Jim Eubanks |
APL GL-1 SAE90W MINERAL GEAR OIL | N/A | CLIPPER PROBABLY MANY OTHERS | 1954 PROBABLY MANY OTHERS | 65-205 | NAPA | NAPA | FOR USE IN MANUAL GEAR BOX/OVERDRIVE. DO NOT USE IN REAR END DIFFERENTIAL. USE ONLY IN THE TRANSMISSION/OVERDRIVE. | steve828 |
Armature Shaft Ball Bearing | 526868 | Clipper | 55/56 Auto-Lite | 3203 | Green Ball Bearing | - | - | BigKev |
Backup Light Switch Assembly | PA443232 | all with Ultramatic, non-Gear-Start | 1951-54 | NS6499 | Echlin | NAPA | Blades for attaching wires
come out the sides instead of
the bottom, but otherwise
perfect match | JeromeSolberg |
Backup Light Switch Assembly | PA443232 | all with Ultramatic, non-Gear-Start | 1951-54 | LS249 | Standard Motor Products | Various | Also NAPA Echlin 6499. Blades
side instead of bottom
mounted. | JeromeSolberg |
Ballast Resistor | - | - | 1955-56 | ICR-115B | ECHLIN | NAPA | All models equipped with Autolite Systems | RSG |
Ballast Resistor | - | ALL | 1955-56 | ICR-115B | ECHLIN | NAPA | All models equipped with Autolite Systems | RSG |
Ballast Resistor | - | All | 1955-56 | ICR-17 | ECHLIN | NAPA | All models equipped with Autolite Systems | BigKev |
Ballast Resistor | - | All | 1955-57 | ICR-12 | ECHLIN | NAPA | All models equipped with Delco Systems | BigKev |
Battery | - | 115C and others | 1937 and others | - | NAPA | NAPA | NAPA Commercial 6-volt battery, 724 N or 7244, BCI No. 1, CCA @ 32F - 815, CCA @ 0F - 650, 9" L, 6 3/4" W, 8" H. $81.50. | JW |
Battery | - | 21st Series Clippers | 1946-47 | 7205 | NAPA | NAPA | NAPA 7205, BCI No. 2E, CA @ 32F 750, CCA @ 0F 620, H 8 7/8", L 19 1/4", W 4", Price $132.99USD | JW |
Battery | - | All | 1948 to 1950 | SSB 3EH | Super Start | O'Reilly's Auto Parts | 875 CCA - Fits Perfect.
$119.00 plus tax | paulg3 |
Battery | - | All | 1948 to 1950 | SSB 3EH | Super Start | O'Reilly's Auto Parts | 875 CCA - Fits Perfect.
$119.00 plus tax | paulg3 |
Battery | - | All | 1951-54 | 7204 | NAPA | NAPA | slightly shorter than the
original, may have to adjust the
battery hold-down. | JeromeSolberg |
Battery Cable | - | All | 1955-56 | 0-27786-20042 | - | Pepboys | Battery to Starter | BigKev |
Battery Cable | - | All | 1955-56 | 0-27786-20024 | - | Pepboys | Battery to Block | BigKev |
Bearing(front) and retaining ring assembly, Clutch shaft | 304123 | 120 thru 19th series - could fit to '54 | 1935 - 41 and beyond? | 6209ZNRC3 | Nachi | ABC Bearings , Silverwater NSW Australia | - | Ozstatman |
Bearing(rear) and retaining ring assembly, Driving shaft | 304124 | 120 thru 19th series - could fit to '54 | 1935 - 41 and beyond? | 6306ZZ | Nachi? | ABC Bearings , Silverwater NSW Australia | - | Ozstatman |
BEARING-REAR BALL | 421075 | 2301-02-06-32-33 | 1949/1950 | 109KS | MRC | Numerous online | This is rear ball bearing that
is pressed onto the parking
gear. Its dimension are 45mm ID,
75mm OD, 16mm width. | j4busuit |
Belt-Fan | 320517 | 2201-02-11-22; 2301-02 | 1948-1950 | NBH 2524489 | Gold Strip | NAPA | Truck & Bus V-Belt TA 21/32" x 49 3/8"; the recommended fan belt listed on Rock Auto is incorrect (too wide and too long). | j4busuit |
Bendix power steering slave seals | - | 56 series with Bendix power steering | 56, maybe others too. | - | - | - | Inner seal is H7L-3 MPI. .625 ID, 7/8 OD. | PackardDon |
Bendix power steering slave seals | - | 56 series with Bendix power steering | 56, maybe others too. | - | - | - | outer dust seal: National 35487 | PackardDon |
Bendix power steering slave seals | - | 56 series with Bendix power steering | 56, maybe others too. | - | - | - | outer dust seal: National 35487 | PackardDon |
Brake light switch | - | All | 1955-1956 | SL-138 | ECHLIN | NAPA | All models | BigKev |
Breaker Plate Assembly | - | All with Delco Distros | 1955-1956 | 1925369 | Delco | - | - | BigKev |
Brush Set | 458608 | Clipper | 55/56 Auto-Lite | ES62 | KEM | - | - | BigKev |
Bumper - Radiator Lower Splasher Rubber | 375077 | All | 1948-1950 | 665-2260 | Balkamp | NAPA | Very close match to original. Fits 22nd series with the single bumper only. Fits all 23rd series. This is the small rubber button that fits between the bumper and splash pan. 9 required per front bumper. Sold in bags of 6. | J.D. in KC |
Cam Bearing Set | - | All with 352 V8 | 1955-1956 | SH293S | TRW | - | - | BigKev |
Carb rebuild kit | - | 1955-56 | All with Rochester 4GC carb | 2-5610 | Echlin | NAPA | A general kit which also fits many GM from 1955 thru early 1960s. Does NOT fit Clippers with Carter WCFB carb. | Craig |
Carburetor Base Gasket | - | All 2 BBL Carburetor Models | All 2 BBL Carburetor Models | 9668 | Fel-Pro | O'Reillys / AutoZone | Vehicle fitment on both websites show the
gasket is for misc International models. | Chris R |
Carrier Bearing | - | Patrician Dana 53 Rear End | 1956 | 25527 | Timken | Autozone / Rock Auto | 2 per Axle | TroyT |
carrier Bearing Cone | - | Patrician Dana 53 Rear End | 1956 | 25590 | Timken | Autozone / Rock Auto | 2 per Axle | TroyT |
Carrier bearing Cone 1955 Clipper | - | Clipper | 1955 | 25590 | Bower | - | May fit 1953-1955? | 64avanti |
Carrier bearing cup | - | 1955 Junior-Clipper | - | 25520 | Bower | - | - | 64avanti |
Carrier Shim Pack | - | Patrician Dana 53 Rear End | 1956 | sk 30214 | Yukon Gear | Summit Racing | Dana 53 Uses same Carrier Bearings as the Dana 44 | TroyT |
Carter Carburetor rebuild kit 53-56 | - | 53-56 4 barrel | 53-56 | NAPA 2-5039A | NAPA | - | Fits Carter carburetors, 4 barrel, kit has
number 080P15371C | duane.g |
Carter Glass Bowl (short style) Fuel Filter Element and Gasket | - | - | - | - | Carter Fuel Filter | Gerald E. Koch | Vendor sells ceramic elements and bowl gaskets. Price $16.95 for element and $3.00 for gasket plus $4.90 S&H. 6727 Country View Lane, San Antonio, TX 78240-2704, hondo37@aol.com. | JW |
circuit breaker, 30 amp | - | 200, 300, and 400 | 51-54 | - | Belkampf 782305 | NAPA | Just over $3. It fits on the headlight switch as well
as the dash panel. Put the "Bat" pole on the feed
side unless you've changed the car to negative
ground. | David Grubbs |
Clutch Disc | unk | All V8 w/T85 Tranny | 1955-6 | RCF606 | NAPA | NAPA | Also fits early 70s GM pickup truck, V8 | JoeH |
Clutch Pressure Plate | unk | All V8 w/T85 OD Tranny | 1955-6 | CA7350 | NAPA | FLAPS | Also fits early 60s thru early 70s Ford truck, F100-150, V8 | JoeH |
Clutch Throw Out / Release Bearing (w/o Collar) | 341805;old# 315889 | See Comments | See Comments | See Comments | Mfr: BCA CTDES54 | Originally BCA, pn: CTDES54 | Fits Models: 120C;120CA;120CD;138CD; 115C; 1600-1-1A-1D; 1700-1-1A-2; 1800-1-1A;1900-1-1A
Factory Number: BCA CTDES54
BCA 16860
BCA 1686
NSK-RHP CT1069
IHC 106887R91
STUDEBAKER 426484
STUDEBAKER 341803
STUDEBAKER 315779
STUDEBAKER 315777
FEDERAL 1069
BORG WARNR 150274
Aetna Bearing A980
Aetna Bearing A882
Aetna Bearing A0980
NICE N1069
NICE 6592
ABC N1069
L&S Bearing TT1069
NDH CT882
CHRYSLER Y1686
GREEN CB1069
BCA 1686O
BCA 16861
TIMKEN 1686 | 39SixSedanMan |
Coil | Delco-Remy 539 | 110 & 120 | 1938 -39 | I C 7 | Echlin | Napa | Generic 6 volt coil | 1938 Club Coupe |
Coil | - | All | 1941-1947 | IC-1 | ECHLIN | NAPA | All models equipped with Autolite Systems | BigKev |
Coil | - | All | 1942-1947 | RR-83 | ECHLIN | NAPA | All 6 cyl models equipped with Delco Systems | BigKev |
Coil | - | All | 1942-1947 | IC-3 | ECHLIN | NAPA | All 6 cyl models equipped with Delco Systems | BigKev |
Coil | - | All | 1948-1954 | IC-7 | ECHLIN | NAPA | All 8 cyl models equipped with Autolite Systems | BigKev |
Coil | - | All | 1948-54 | IC-9 | ECHLIN | NAPA | All 8cyl models equipped with Delco Systems | BigKev |
Coil | - | Clipper Deluxe | 1953 | UC14 | Standard | Napa | May fit other Years and Models also | BigKev |
Coil | - | Clipper Deluxe | 1953 | IC 9 VR | Echlin | Napa | May fit other Years and Models also | BigKev |
Coil | - | All | 1955-1956 | IC-15 | ECHLIN | NAPA | All 8 cyl models equipped with Autolite Systems | BigKev |
Coil | - | All Autolight Models | 1955-56 | IC17 | Echlin | - | - | BigKev |
Coil | - | All Delco Models | 1955-56 | UC-12X | Standard | - | - | BigKev |
Coil | - | All Delco Models | 1955-56 | IC12 | Echlin | - | - | BigKev |
Coil | - | All | 1955-57 | IC-12 | ECHLIN | NAPA | All 8cyl models equipped with Delco Systems | BigKev |
Complete Engine Gasket Set | - | All? | 1935-1947 | FS727OC | Felpro | - | - | BigKev |
Complete Engine Gasket Set | - | All with 356 engine | 1940-1950 | FS7628 S1 | Felpro | - | 1940 manifold gaskets not included | BigKev |
Condenser | - | 1089 | 1937 | RR 174 | - | NAPA | - | JW |
Condenser | - | 110 | 1938 1939(early) | RR174 | ECHLIN | NAPA | Delco-Remy
Distributor #1110203 | 1938 Club Coupe |
Condenser | - | with Autolite IGP dist, | 1948-1950 | FD75T | TRU-TECH | anywhere | This condenser can be found by looking up 1959 Edsel with 223 6 Cyl. engine | Chuckltd |
Condenser | - | with Autolite IGP dist, | 1948-1950 | FRC-111 | P&D | old stock only | This condenser can be found by looking up 1959 Edsel with 223 6 Cyl. engine | Chuckltd |
Condenser (replaces al71) | - | 2106 Maybe others | 1947 | ECH AL869 | Echlin Ignition | NAPA | AL71 no longer available. This is the
replacement | Rscott77x |
Condensor | - | All | 1941-1954 | AL-71 | ECHLIN | NAPA | All models equipped with Autolite Systems | BigKev |
Condensor | - | All | 1942-57 | RR-134 | ECHLIN | NAPA | All models equipped with Delco Systems | BigKev |
Condensor | - | All | 1948-1950 | AL-869 | ECHLIN | NAPA | All models equipped with Autolite Systems | BigKev |
Condensor | - | All Delco Models | 1951-1954 | U1511 | - | Autozone | Used in 12 volt conversion | BigKev |
Condensor | - | Clipper Deluxe | 1953 | RR174 | - | Napa | May fit other Years and Models also | BigKev |
Condensor | - | ALL | 1955-56 | AL-868 | ECHLIN | NAPA | All models equipped with Autolite Systems | RSG |
Condensor | - | All | 1955-56 | AL-118 | ECHLIN | NAPA | All models equipped with Autolite Systems | BigKev |
Condensor | - | All Autolight Models | 1955-56 | AL868 | Echlin | - | - | BigKev |
Condensor | - | All Delco Models | 1955-56 | DR-60X | Blue Streak | - | - | BigKev |
Condensor | - | All Delco Models | 1955-56 | RR174 | Echlin | - | - | BigKev |
Condensor | - | 120 | 39 and 40, probably up to 1950 | G124 | BWD | O'Riley | - | David Grubbs |
Cross Shaft/Sector Shaft Seal | 433294 | All Models | 1951-1956 | 12334 | SKF | NAPA | - | ASSHOLES GARAGE |
Cross-Universal Joint Mechanics | 303405 | 2213-20-22-26; 1950-1954 Henney Senior | 1948-1954 | UJ531G | Napa and SKF | Napa | Three required for the vehicles listed including Henney-Packard. | PackardDon |
Cylinder, Brake | - | Deluxe | 1949-1951 | W18290&1 | Dorman | Rock Auto | Only difference from orig, the center casting has one not two inlet tap areas.
But for $5.50 ea, they won't know. for Look up: fits a '51 deluxe. | PackardDon |
Cylinder, Brake (Front Left) | - | Clippers | 1954 | 33220 | Brakeware | Autozone | - | PackardDon |
Cylinder, Brake (Front Left) | - | Clippers | 1954 (maybe others) | F18290 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | PackardDon |
Cylinder, Brake (Front Right) | 18293 | Clipper (Max Merritt Shows ALL MODELS) | 1953 (Max Merritt Shows 1951-1954) | WC18291 | RAYBESTOS | Rock Auto | This Wheel cylinder has a 1 1/8" bore with a 3/8"- 24 thread size. Alternate
Part = Napa UP 18291 | PackardDon |
Cylinder, Brake (Front Right) | - | Clippers | 1954 | 33221 | Brakeware | Autozone | - | PackardDon |
Cylinder, Brake (Front Right) | - | Clippers | 1954 (maybe others) | F18291 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | PackardDon |
Cylinder, Brake (Left Front) | 426548 | ALL 55TH, 56TH | 1955, 1956 | WC18290 | RAYBESTOS | MANY | MADE IN CHINA | PackardDon |
Cylinder, Brake (Left Rear) | - | Clipper | 1954 (maybe others) | F18984 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | PackardDon |
Cylinder, Brake (Left Rear) | 426535 | 5580, 5680-5688 | 1955, 1956 | WC90254 | RAYBESTOS | MANY | MADE IN CHINA | PackardDon |
Cylinder, Brake (Left Rear) | 426535 | 5580; 5680-88 | 1955, 1956 | 33005 | - | AUTOZONE | 1" DIAMETER | PackardDon |
Cylinder, Brake (Left Rear) | - | Clippers | 1955-1956 | 33791 | Bendix | - | - | PackardDon |
Cylinder, Brake (Left Rear) | - | Clippers | 1955-1956 | WC37218 | Raybestos | - | - | PackardDon |
Cylinder, Brake (Right Front) | 426549 | ALL 55TH; 56TH | 1955, 1956 | 33221 | - | AUTOZONE | 1-1/8" DIAMETER | PackardDon |
Cylinder, Brake (Right Front) | 426549 | all 55th, 56th | 1955,1956 | WC18291 | RAYBESTOS | MANY | MADE IN CHINA | PackardDon |
Cylinder, Brake (Right Rear) | - | Clipper | 1954 (maybe others) | F18985 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | PackardDon |