1933-36 (10th->14th Series) - SUSPENSION & STEERING
|
| Subject | Application | Document |
Chassis - Lubricator Tanks Excess oil in city driving | (Not Specified) | |
Directing Acting Shocks - Repair Kit Discontinured Information | (not specified) | |
Flood Zones, Cars in dirt carried in - drain/refill differential, clean/repack wheel bearings | (all models) | |
Front Springs - Not Interchangeable center bolt location - 1001 vs. 7th rear, reiterated | 9th-10th | |
Front Springs - Not Interchangeable center bolt location - also applies to 1001 vs. 7th rear | 9th-10th | |
Front Suspension, Correct Answers to Brakes and implementation of hydraulic brakes, independent front suspension | 12th 120 | |
Lubrication, Steering and Transmission unusually low temperatures - seasonal weight change | (not specified) | |
Oil Seals, Leather dry installation damage - soak in engine oil | (all models) | |
Packard and Delco Lovejoy Shock Absorber Fluid Recommendations | 3rd thru 12th Series | |
Packard and Delco Lovejoy Shock Absorber Fluid Recommendations | 6th thru 14th Series | |
Rear Springs, Lubropack complete lubrication procedure - Lubropack compound | 12th-14th 120-120B | |
Shock Absorber Arm Rear Bushing Puller new special tool - on-car, also for Senior grommet/sleeve | 12th-14th 120-120B | |
Shock Absorber Cover Wrench special sale pricing - tool description | 12th-14th 120-120B | |
Shock Absorber Fluid Delco-Lovejoy vs. Houdaille - part reference | (not specified) | |
Shock Absorber Fluid Gun new special tool - dual-action | (not specified) | |
Shock Absorber Link Bushing squeaks - new design, front/rear | 12th-14th | |
Shock Absorber Links rattles - replace grommet/bushing/sleeve, new tool | 900 1001-2 1100-1-2 | |
Shock Absorber Valves - Standard Equipment reference chart | 8th-10th | |
Shock Absorber Valves and Metering Identification - Correction part numbers transposed | 1003-4-5-6-7-8 | |
Shock Absorber Valves and Metering Identification part reference chart | 10th | |
Shock Absorbers - Changes Production Change Over | 12th Series | |
Shock Absorbers - Interchangeable Possibilities swapping valves - reference chart | 14th | |
Shock Absorbers - New Type O & S superseded by Delco - adjustment, installation | 8th-11th | |
Shock Absorbers - Ride Quality Inspection and Correction | 12th Series Eight | |
Shock Absorbers Lovejoy, installation/filling - valves/metering identification, part reference | 9th-11th | |
Shock Absorbers Chart, Spring and part number reference | 14th | |
Shock Links Not Interchangeable | 12th Series | |
Shocks - Filling and Bleeding Air Procedures | 12th Series | |
Shocks - Filling and Bleeding Air Shop made tool | 12th Series | |
Spring and Shocks Absorber Chart part number reference | 14th | |
Spring Shackles - Adjustments Changes in construction | 12th Series | |
Spring Shackles - Rattle Adjustments | 12th Series | |
Springs - Noise Modifications | (not specified) | |
Steering Column Upper Bushing Caution about bushing and gear type | (not specified) | |
Steering Data alignment specifications - reference chart | 1st-14th 120-120B | |
Steering Gear (Tenth Series, The) new model information - new worm/roller type, Twelve | 1005-6 | |
Steering Gear Lubricants heavy base no longer needed - use rear axle oil | (all models) | |
Steering Gear, Instructions for Adjusting the Worm and Roller Type eliminating rattles, stiff action - proper procedure | 903-4-5-6 1003-4-5-6 1103-4-5-7-8 | |
Steering Knuckle Lubrication sealed ball bearings - recommended lubrication | 10th | |
Steering Lever Aligner new special tool - bending to line up steering wheel | 10th | |
Steering Lever Alignment Warning against bending cross tubes | (not specified) | |
Steering Pillar Tube Bushing - Change the Piece Number part number correction | 11th | |
Steering Pillar Tube Bushing new lubricated fabric design - installation precaution | 11th | |
Steering Post Nut new special tool - used with wheel puller | (all models) | |
Steering Post Upper Bushing - Squeak New style bushings | 11th Series | |
Steering Post Upper Bushings new graphited fabric design - installation precaution | 11th | |
Steering Road Shock Adjustments to drag link | 12th Series | |
Steering Wheel Position raise/lower - three different column brackets | (not specified) | |
Steering Wheel Puller, New Style new special tool - use with post nut | (all models) | |
Upper Steering Column Bushing Squeak Adding rubber shims | (not specified) |
SC = Service Counselor | SL = Service Letter | STB = Service Technical Bulletin | SSB = Studebaker Service Bulletin |
NOTE: These PDFs were created from High Quality Scans. It is recommended that you Right Click on the link(s) above and do a "Save Target As". This will download the PDF to your machine rather than trying to open and view it over the web.
Disclosures & Disclaimers
Though previously published elsewhere, this work is provided with my full permission for display on the PackardInfo.com website and the personal use of visitors to that site. Any other unauthorized use, however, is expressly prohibited and may be subject to prosecution.
Also, because this index was compiled from documents published by the factory, neither the author nor PackardInfo.com are responsible for errors in content arising from source information.
