Factory Service Index - Packard Motor Car Information

An Index to Service Information for 1951-54 (24th->54th Series) Packards

1951-54 (24th->54th Series) - ALL ITEMS

MAIN SERVICE INDEX -> 1951-54 (24TH->54TH SERIES) -> ALL ITEMS

Subject	Application	Document
Accelerators, Sticking - Campaign interference with carpet - jute removal	2602-31	STB 53T-1, Dealer 1
Air Cleaner - see: FUEL & EXHAUST
Air Cleaner Alignment - 4-Barrel Carburetor dust leaks - inspect oil and adjust brace	26th	STB 53T-13, Dealer 11
Air Cleaner Rattles 359- and 327-cid - air cleaner bracket/stud insulator	54th	SC Vol. 28, No. 6, p. 44
Antenna, Electric: Damaged When Returned insufficient packing - lowering mast	24th	SC Vol. 25, No. 7, p. 27
Antenna, Electric: Motor Failure burned out - weak battery	24th-54th; (55th-56th)	SC Vol. 28, No. 8, p. 52
Antenna, Electric: Parts Change mast - superseded part	24th	SC Vol. 25, No. 14, p. 68
Antenna, Electric: Parts List Correction grommet	24th	SC Vol. 25, No. 12, p. 47
Antenna, Electric: Servicing operations, checks - disassembly, parts reference	24th	SC Vol. 25, No. 8, p. 29
Antenna, Electric: Water in damaged strip/rollers - plugged drain	24th-25th	SC Vol. 26, No. 12, p. 58
Anti-Freeze - Types Information about the different types	(Not Specified)	SL Vol.7, No. 15
Anti-Freeze Protection, Alcohol - New Car Shipments winter concentration increased	25th	STB 51T-44, Dealer 39
Anti-Freeze Solutions, Re-Use of contamination - system cleaning	(all models)	SC Vol. 28, No. 9, p. 56
Anti-Freeze Factory Delivery Cars	(Not Specified)	SL Vol.8, No. 24
Armite Anti-Seize Compound product information - utility item	(all models)	SC Vol. 27, No. 11, p. 48
Axle Outer Oil Seals scuffed hub - excessive axle end play	26th	SC Vol. 27, No. 4, p. 21
Back Up Light Switch Bracket Rubbing Rear Brake Tube steering column rattles	24th-25th	STB 52T-22, Dealer 15
Back-Up Light Switch Bracket - Rubbing Rear Brake Tube Easamatic only - rework bracket	25th	SC Vol. 26, No. 10, p. 39
Backing Plate Bolts, Brake grease leak, snapping noise - loose, retightening	24th	SC Vol. 25, No. 14, p. 66
Backing Plate Bolts, Brake grease leak, snapping noise - loose, retightening	24th	STB 51T-40, Dealer 35
Balance Weights, Chrome Wire Wheel coming off - new type	24th-26th; (54th-56th)	SC Vol. 27, No. 9, p. 40
Batrometer Overview and Use	(not specified)	SL Vol. 4, No. 22
Battery Cable Campaign air cleaner interference - longer negative (starter) cable	24th	STB 50T-38, Dealer 30
Battery Life Information	(Not Specified)	SL Vol.8, No. 23
Bearing Clearance, Main and Rod noise/vibrations - undersize journals, identification	(not specified)	SC Vol. 25, No. 6, p. 22
Bearings, Care of Ball and Roller installation/removal damage - proper support	(all models)	SC Vol. 20, No. 8
Bell Housing and Bushing Assembly oil leaking past seal - drain back area increased	25th	SC Vol. 26, No. 2, p. 8
Bell Housing Oil Seal leather leaks - use neoprene	23rd-24th; (25th-55th)	SC Vol. 25, No. 8, p. 31
Bell Housing Oil Seal Leaks converter mis-alignment - checks	23rd-24th; (25th-56th)	SC Vol. 25, No. 10, p. 40
Bell Housing Seal Drain Hole - Enlarged leaks - drain hole enlarged	24th	SC Vol. 25, No. 14, p. 67
Body Bolt Brackets eliminated from production - retained for service	2692-95-97	SC Vol. 27, No. 6, p. 30
Body Panel Striking Frame floor pan flex - rework	24th-25th	SC Vol. 26, No. 10, p. 38
Body Panel Striking Frame floor pan flex - rework	24th-25th	STB 52T-23, Dealer 16
Body Side Sills Painted Internally rust prevention - new hole plug	54th; (55th-56th)	SC Vol. 28, No. 9, p. 55
Body Straightening Tools new special tool - portable hydraulic pump/ram	24th-54th	SC Vol. 25, No. 4, p. 15
Bonnet Rubber Bumpers shake, flutter - new, thicker bumpers	24th	SC Vol. 25, No. 12, p. 48
Brake Backing Plate Bolts grease leaks, snapping noise - inspection, retightening	24th	STB 51T-40, Dealer 35
Brake Piston Seal Retainer - Part No. 423084 low and reverse - proper thickness	23rd-54th	SSB No. 344, p. 4
Brakes: Advance Parts Information 11- vs. 12-in. Brakes - parts reference	5411	STB 54T-1, Dealer 1
Breather Oil Leaks speeds over 30MPH - speedometer driving gear installed backwards	23rd-26th	SC Vol. 27, No. 11, p. 49
Breather, Late Type oil loss - new design, relocated	23rd-24th	STB 51T-4, Dealer 3
Bumper Attachment, Universal new special tool - floor jack	(all models)	SC Vol. 30, No. 6, p. 24
Bumper Guard Cross Bar Extension Splasher, Front rattles - new liner, proper torque	26th	SC Vol. 27, No. 6, p. 30
Bumper Guards Exhaust Noise	(Not Specified)	SL Vol.8, No. 24
Bumper Impact Bar, Rear superseded part - rework required	2678	SC Vol. 28, No. 6, p. 42
Bushing Tools, Service description and illustration of use	1951; 20th-24th	SC Vol. 24, No. 11, p. 50
Bushing Tools, Service description and illustration of use	23rd-24th	SC Vol. 24, No. 11, p. 50
Bushing Tools, Service description and illustration of use	1951; 20th-54th	SC Vol. 28, No. 12, p. 65
Bushing Tools, Service description and illustration of use	23rd-55th	SC Vol. 28, No. 12, p. 65
Bushings and Bearings, Service part number reference	23rd-56th	SSB No. 355, p. 6
Bushings, Service now available for service - see SC Vol. 24, No. 11	23rd-24th	STB 50T-57, Dealer 44
Bushings, Service part number reference	23rd-24th	SC Vol. 24, No. 11, p. 52
Bushings, Service part number reference	24th	SC Vol. 24, No. 11, p. 52
Bushings, Service part number reference	1951; 20th-54th	SC Vol. 28, No. 12, p. 70
Bushings, Service part number reference	23rd-55th	SC Vol. 28, No. 12, p. 70
Camber Specifications changed	24th	SC Vol. 25, No. 12, p. 46
Camber Specifications increased	24th	SC Vol. 25, No. 12, p. 46
Camshaft superseded part	23rd-54th	SC Vol. 29, No. 8, p. 40
Carburetor - see: FUEL & EXHAUST
Carburetor: 4-Barrel - 359 Cu. In., 212 HP Engines flooding, stalling - choke, fast idle, float settings, internal leaks	5406-13-26-31	STB 54T-5 (Zones only)
Carburetor: 4-Barrel Kits 327-cid engine - changeover kit	24th-54th	SC Vol. 28, No. 3, p. 12
Carburetor: Accelerator Pump Relief Valve - 4-bbl. Carburetor plug - superseded part	26th	SC Vol. 27, No. 8, p. 38
Carburetor: Accelerator Pump System Fuel Vapor - (WCFB) 4-bbl. stumbling hot - check valve and heat shield installation	26th-54th	SC Vol. 28, No. 6, p. 43
Carburetor: Choke and Fast Idle Settings Changed 359-cid, 212HP engine - lean choke, increase fast idle	5406-13-26-31	SC Vol. 28, No. 10, p. 60
Carburetor: Choke and Fast Idle Settings Changed loading up, stalling - leaned (359 cu. in - 212 HP)	5406-13-26-31	STB 54T-4, Dealer 4
Carburetor: Choke Setting Changed - WCFB flooding cold - leaned	26th	STB 53T-2, Dealer 2
Carburetor: Choke Setting Changed - WCFB flooding, cold - leaned	26th	SC Vol. 27, No. 3, p. 18
Carburetor: Choke Setting Changed over-choked, loading - leaned	24th	SC Vol. 25, No. 4, p. 16
Carburetor: Chokes, Sticking hard starting, loading up - gummed shaft, cleaning	(not specified)	SC Vol. 25, No. 14, p. 67
Carburetor: Cold Stalling Due to Icing explanation - prevention	All Models	SC Vol. 26, No. 2, p. 5
Carburetor: Fast Idle Adjustment clearance reduced - gauge changed	24th	SC Vol. 25, No. 3, p. 12
Carburetor: Fuel Leaks pump discharge jet housing - retighten or replace gasket	24th	STB 51T-16, Dealer 13
Carburetor: Gasket Sets - Carter 2301S and 2112S superceded part	54th	SSB No. 350, p. 7
Carburetor: Low Speed Jet Size - WCFB part throttle surge, poor idle - enlarged	26th	SC Vol. 27, No. 4, p. 21
Carburetor: Low Speed Jet Size Change - WCFB part throttle surge, poor idle - enlarged	26th	SC Vol. 27, No. 4, p. 21
Carburetor: Metering Rods Carter WGD-WCFB - service parts	54th	SC Vol. 28, No. 8, p. 51
Carburetor: Metering Rods part number reference - repair kits	24th	SC Vol. 25, No. 6, p. 22
Carburetor: Metering Rods part number reference	25th	SC Vol. 26, No. 1, p. 3
Carburetor: Metering Rods part number reference	26th	SC Vol. 27, No. 4, p. 22
Carburetor: Specifications - WCFB revised unloader adjustment	26th	SC Vol. 27, No. 5, p. 26
Carburetor: Starter Switch, Car - see: ELECTRICAL	--	--
Carburetor: Throttle Operating Rod...Flex Spring, WCFB - Campaign secondary and choke valve not opening - check rod, install new spring	2602-06-26-31	STB 52T-37, Dealer 27
Carburetor: Throttle Rod Override Spring WCFB 985S supplement - new part assembly	26th	SC Vol. 27, No. 4, p. 22
Carburetor: Tools - WCFB 985S additional, special tools	2602-06-26-31	SC Vol. 27, No. 1, p. 6
Carburetor: Troubles - WCFB 985S various - causes and corrections	26th	STB 53T-6, Dealer 5
Carburetor: WCFB Model 985S description and servicing	2602-06-26-31	SC Vol. 27, No. 1, p. 1
Carpet Screws pre-delivery installation - additional hardware furnished	24th	STB 51T-29, Dealer 25
Carpet Screws pre-delivery installation - more hardware furnished	24th	STB 51T-41, Dealer 36
Carpet Screws pre-delivery installation - more hardware may be needed	26th	SC Vol. 27, No. 11, p. 50
Changes in... converter pump broken, governor valve sticking - reactor shaft bearing kit, anodized governor parts	54th	STB 54T-11 (Zones only)
Changes in� (Confidential) (REVISED) production - typos	26th	STB 53T-3R (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	23rd-24th	STB 51T-10 (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	24th	STB 51T-14 (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	23rd-24th	STB 51T-3 (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	24th	STB 51T-36 (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	24th-25th	STB 52T-5 (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	26th	STB 53T-14 (Zones only)
Changes in� (Confidential) production - with part, effective date/unit	26th	STB 53T-3 (Zones only)
Chrome Plating - Correction enamel coated parts, polishing - no Blue Coral	24th-25th	SC Vol. 26, No. 4, p. 16
Chrome Plating nickel eliminated, enamel coated parts - identification chart, cleaning/polishing	24th-25th	SC Vol. 25, No. 14, p. 65
Chrome Plating nickel eliminated, enamel coated parts - identification, cleaning/polishing	24th-25th	STB 51T-22, Dealer 19
Cigar Lighter Elements, Replacement sticking/burning out - reworked, identification	22nd-23rd; 24th	SC Vol. 25, No. 2, p. 7
Clutch Housing Bushing Tools, 9-in. Converter new special tools	25th	SC Vol. 26, No. 8, p. 31
Compressor Driving Pulley Run-Out Air Conditioned Cars wobble - remove burrs in damper hub	26th	STB 53T-19, Dealer 16
Continental Tire Carrier - Rattles checks and adjustments	26th	STB 53T-12, Dealer 10
Control Assembly Part No. 423800 (exc. Gear Start) superceded part - exceptions	23rd-54th	SSB No. 338, p. 4
Control Valve: Changes to Improve Shift Pattern update to 56th Series - new valving kits	54th-55th	SC Vol. 30, No. 8, p. 29
Control Valve: Damper - New Type pulsation/flutter - new type valve	23rd-24th	SC Vol. 25, No. 8, p. 31
Control Valve: Plug Gauge Set special tool for 23rd Series, also for 24th - indentification chart	24th	SC Vol. 24, No. 10, p. 48
Control Valve: Torque-Tightening stuck valves - fluid/pressure leaks	23rd-56th	SC Vol. 30, No. 9, p. 35
Control Valve: Valve Body, Upper new production, die-cast - requires spring-type check valve	23rd-24th	SC Vol. 26, No. 7, p. 28
Converter: Application Chart part number reference - incl. flywheel	23rd-25th	SC Vol. 26, No. 4, p. 16
Converter: Assemblies - Balanced 9-in. type - service precautions	25th	SC Vol. 26, No. 9, p. 34
Converter: Corrosion Preventative in Replacements silica gel pack - remove	23rd-24th; (25th-56th)	SC Vol. 25, No. 4, p. 16
Converter: Fluid Leaks damaged washers - use of sealant	23rd-56th; 56J	SSB No. 350, p. 1
Converter: Inlet Pressure lower pressure in reverse	23rd-24th	SC Vol. 24, No. 12, p. 56
Converter: Outlet Valve check valve found - removal	24th	SC Vol. 25, No. 12, p. 46
Converter: Pump Shaft - Oil Pump Rotor Splines - see also: Front Oil Pump	--	--
Converter: Pump Shaft - Oil Pump Rotor Splines - Worn or Stripped - Correction new 40-spline service parts	54th-55th-56th	SC Vol. 30, No. 5, p. 17
Converter: Pump Shaft - Oil Pump Rotor Splines - Worn or Stripped new 40-spline service parts	54th-55th-56th	SC Vol. 30, No. 3, p. 10
Converter: Pump Shaft and Oil Pump Rotor worn/stripped splines - corrections, superseded parts)	54th-55th-56th; 56J	SSB No. 331, p. 4
Converter: Reaction Clutch Sprags premature failure - replace in sets	54th-55th-56th; 56J	SSB No. 348, p. 3
Converter: Reaction Clutch Sprags replacement - use of reaction clutch assembly	54th-55th-56th; 56J	SSB No. 358, p. 7
Converter: Reactor Shaft Bushing Clearance direct drive failure - excessive clearance	23rd-24th; (25th-55th)	SC Vol. 25, No. 8, p. 31
Converter: Reactor Shaft Bushing Installer Spacer 9-in. converter, shallower setting - new special tool	25th	SC Vol. 26, No. 8, p. 30
Converter: Reactor Shaft Thrust Bearing new type - superseded parts	26th-54th	SC Vol. 28, No. 6, p. 41
Converter: Reactor Shaft, Thrust Bearing new type - identification, service	26th	SC Vol. 27, No. 6, p. 29
Converter: Relief Valve eliminated in production - replace with plug	25th	SC Vol. 26, No. 7, p. 26
Converter: Retaining Screw Changes self-locking screws, special washers - torque spec	24th	STB 50T-55, Dealer 42
Converter: Torque new 9-in type - description	24th-25th	SC Vol. 26, No. 3, p. 11
Converter: Whine or Whistle oil flow, insufficient vane clearance - new style first turbine	25th	STB 52T-10 (Zones only)
Convertible: Top and Rear Window Panel, Cleaning proper procedure	24th	SC Vol. 25, No. 3, p. 12
Convertible: Top Care and Cleaning proper chemicals and use	24th	SC Vol. 25, No. 7, p. 28
Convertible: Tops, ...and Caribbean holes, rear quarter - modification and adjustments	2678-79; 5478-79	SC Vol. 28, No. 3, p. 11
Courtesy Coats and Mechanics Suits Information on availabity and sizes	(not specified)	SL Vol. 1, No. 17A
Cowl and Body Shake rough roads, broken welds - rewelding, other checks	2469	SC Vol. 26, No. 2, p. 6
Cross and Trunnion Bearing, Universal Joint Universal Products, rear - production change, identification	2401; 2501; 2601 (Ultramatic)	SC Vol. 27, No. 7, p. 34
Cylinder and Piston Assembly superceded parts - precautions	24th-54th	SSB No. 331, p. 6
Cylinder Block and Piston Assembly incorrect substitution of 359-cid assembly	24th-54th	SSB No. 340, p. 8
Cylinder Head - Part No. 436141 superceding part - thread sealant	23rd-25th	SC Vol. 26, No. 6, p. 24
Cylinder Repairs small holes/cracks - repair compounds	(all models)	SC Vol. 25, No. 4, p. 16
Delco Distributor Tools New Service Tool Set	(not specified)	SL Vol. 1, No. 1
Delco Generator Lubrication new commutator end housing - revised procedure	25th-26th	SC Vol. 26, No. 12, p. 60
Diagnosis basic procedure, pressure tests, adjustments	23rd; (24th-54th, exc. Gear Start)	SC Vol. 25, No. 11, p. 43
Diagnosis and Pressure Check Information (exc. Gear Start) direct drive clutch engagement - procedures	23rd-54th	SSB No. 338, p. 6
Differential Carrier Assemblies - New Part Numbers superseded parts - change flange	22nd-25th	SC Vol. 26, No. 7, p. 28
Differential Carrier Data universal joint flange - part number reference	26th	SC Vol. 27, No. 4, p. 20
Differential Carrier Replacement new heavier design - service replacement	24th-25th; (exc. 2413-2513)	SC Vol. 28, No. 5, p. 37
Differential Data production change - longer pinion gear, wider rear bearing, smaller case	54th	SC Vol. 28, No. 2, p. 6
Differential Driving Pinion Flange seal scratched, leaking - raised step on new type flange, dust shield	22nd-25th	SC Vol. 26, No. 2, p. 7
Differential Gears and Pinions, New Type superseded parts - Revacycle gears	23rd-25th	SC Vol. 26, No. 8, p. 30
Differential Sealing Ring Service Tip holding clip fabrication - production change	26th	SC Vol. 27, No. 6, p. 29
Differential Tools, New design changes - pinion bearing cup removal	54th	SC Vol. 28, No. 3, p. 12
Differential Tools, New new additional - complete special tool reference	26th	SC Vol. 27, No. 8, p. 37
Differential, Noisy carrier pedestal spread - replace carrier/cap assembly and bearings	24th-25th	STB 52T-32 (Zones only)
Differential, Servicing the - Additional Instructions pedestal spread - side bearing adjustment	26th	SC Vol. 27, No. 9, p. 42
Differential, Servicing the noise diagnosis - cleaning, disassembly, inspection, assembly	26th	SC Vol. 27, No. 3, p. 13
Direct Drive Clutch - see also: Diagnosis and Pressure Check Information	--	--
Direct Drive Clutch: 9-in.Converter does not engage - new type clutch piston	25th	SC Vol. 26, No. 12, p. 58
Direct Drive Clutch: Fails to Disengage engine stalling - enlarge governor oil vent	23rd-26th	STB 53T-4, Dealer 3
Direct Drive Clutch: Fails to Disengage engine stalling - governor modification	25th-54th	SC Vol. 28, No. 6, p. 42
Direct Drive Clutch: Piston Ring Gap, Checking precautions - specifications	23rd-24th; (25th-54th, exc. Gear Start)	SC Vol. 25, No. 4, p. 16
Direct Drive Clutch: Plate - 11-1/4 and 9-in. Diameter torsional disturbance, roar - new types, larger spring openings	23rd-26th	SC Vol. 27, No. 8, p. 38
Direct Drive Clutch: Plate - 9-in. Diameter torsional disturbance, roar - superseded part, larger spring openings	24th-26th	STB 53T-8 (Zones only)
Direct Drive Clutch: Plates - 11-1/4-in. torsional disturbance, with new style planetary dampers - enlarged spring openings	23rd-25th	STB 52T-20 (Zones only)
Direct Drive Clutch: Release - Gear Start slow/no release in drive - new governor and parking lock gear	54th	STB 54T-15 (Zones only)
Direct Drive Clutch: Slippage - Gear Start slipping due to oil - removal of chamfers	54th	SC Vol. 28, No. 10, p. 58
Direct Drive Clutch: Slippage retained oil - rework clutch facing chamfers	54th	SC Vol. 28, No. 10, p. 58
Distributor - see: ELECTRICAL
Distributor Breaker Plate - Delco new parts - points added	2201-02-11-22-32; 2301-02; 2401-02-13; 2501-02-13-31; 2601-02-11-13-31-33	SC Vol. 27, No. 11, p. 47
Distributor Breaker Plate, Delco-Remy erratic timing, dwell, point bounce - service precautions	54th	SC Vol. 28, No. 7, p. 47
Distributor Governor and Vacuum Advance insufficient reading - proper testing	120C-138CD; 115C; 16th-54th	SC Vol. 28, No. 7, p. 48
Disturbance in Reverse insufficient oil - rear pump check valve modification	25th	SC Vol. 26, No. 12, p. 58
Disturbance in Reverse oil restricted, aerated - enlarge check valve opening	25th	STB 52T-33, Dealer 24
Door Handle Push Buttons hard operating - striker/hinge adjustments	24th-26th	SC Vol. 27, No. 11, p. 49
Door Handle Replacement stronger casting - new lock cylinder spring and retainers	24th	SC Vol. 24, No. 9, p. 43
Door Handle Replacement stronger casting - new lock cylinder spring and retainers	24th	STB 50T-37, Dealer 29
Door Lock Knobs - 24th Series pulling off - new harder type	24th	STB 51T-33, Dealer 29
Door Lock: Flat Rate Manual, Changes in striker fit - sheets attached	23rd-54th	STB 53T-24, Dealer 21
Door Locking Knobs, Removing New Type Rubber procedure - suggested tool, fabrication	25th	SC Vol. 26, No. 8, p. 30
Door Locking Rod and Knobs new type - use of heat	25th	STB 52T-12, Dealer 8
Door Locks, Frozen water intrusion - dry and oil	24th	STB 50T-56, Dealer 43
Dust Cover Kit, New Front Universal Joint superseded part - installation (over pin)	24th-25th	SC Vol. 26, No. 7, p. 27
Engine and Parts - 288 Cu. In. Displacement universal five-main block and piston assembly - build-up	22nd-54th	SSB No. 350, p. 6
Engine and Parts - Five Main Bearing universal block and piston assembly - build-up	22nd-54th	SSB No. 350, p. 6
Engine and Parts - Nine Main Bearing five-main block and piston assembly substitution - build-up	24th-26th	SSB No. 350, p. 6
Engine and Parts - Service Bulletin Correction see SSB No. 350, p. 6 - engine/part numbers	22nd-54th; 55th-56th	SSB No. 351, p. 3
Engine Runaway - Flare - Low Brake Information premature failure of high range clutch - summary of checks and corrections	54th-55th-56th	SC Vol. 30, No. 7, p. 25
Engine Runaway low range brake spring changes	54th-55th	STB 56T-2, Dealer 1
Engine Runaway/Flare - see also: Front Oil Pump High Range Clutch Low Range Brake Throttle Control/Linkage Throttle/Timing Valve	--	--
Engine Service Data - 359 Cu. In., 212 H.P. new product information - ignition timing, head nut torque	5450-51-52-53; 5477-78-79	STB 54T-2, Dealer 2
Engine Support Bar Screws special tool update - longer screws required	24th; (25th-54th)	SC Vol. 25, No. 10, p. 38
Engine Vibration Different Causes of Vibration	(not specified)	SL Vol. 2, No. 8
Engine, 200 Models With 300 (327 Cu. In.) new option, identification - related parts reference	2401	STB 51T-9, Dealer 8
Engine: Advance Parts Information model usage - corrections, additions	5400-01-79	STB 54T-1, Dealer 1
Engines, Service hydraulic tappets in all - add oil filter, suffix	24th-25th	SC Vol. 25, No. 14, p. 67
Engines, Service Replacement (Correction) not applicable, 24th-25th-26th - engine part number, 359-cid	54th	SC Vol. 28, No. 10, p. 58
Engines, Service Replacement hydraulic tappets and Ultramatic equipment, retrofit - part number reference	24th-54th	SC Vol. 28, No. 9, p. 55
Exhaust Manifold superceded parts	22nd-25th	SSB No. 348, p. 8
Exhaust Noise Bumper Guards	(Not Specified)	SL Vol.8, No. 24
Exhaust Systems: Advance Parts Information 54th vs. 26th Series - pipes and supports	54th	STB 54T-1, Dealer 1
Expansion Valve - Trouble Diagnosis insufficient or no cooling	26th-54th	SC Vol. 28, No. 2, p. 8
Fan Belt - see: RADIATOR & COOLING
Fan Belt Adjusting Tool new special tool - torque tightening	24th	SC Vol. 25, No. 5, p. 19
Fan Belt Removal new special tool - new torque method	24th	SC Vol. 24, No. 9, p. 43
Fan Noise, Engine roar at speed, power steering pump pulley clearance - new fan design	54th	STB 54T-8 (Zones only)
Filling Gear-Start Transmission suggested tool - fabrication	54th	SC Vol. 28, No. 10, p. 60
Flange Holding Tool, Universal Joint new special tool - pinion bearing preload procedure	26th	SC Vol. 27, No. 8, p. 36
Flat Rate Manual new edition - retain prior for older models	24th	STB 51T-13, Dealer 11
Flat Rate Manual, Changes in inspection and fluid change - sheets attached	24th-54th	STB 53T-24, Dealer 21
Flat Rate Time Allowances - Changes in Flat Rate Manual new product information - sheets attached	26th-54th	STB 53T-24, Dealer 21
Floor Bumper, Rear Axle rear u-joint striking floor pan - kit installation	24th (Ultramatic)	SC Vol. 26, No. 10, p. 39
Floor Bumper: Part Number - Correction rear axle floor bumper kit	24th (Ultramatic)	SC Vol. 26, No. 12, p. 60
Fluid Drain Can new special tool - fluid filtering/reuse	23rd-24th; (25th-56th)	SC Vol. 25, No. 3, p. 12
Fluid Drain Period Revised increased - level check unchanged	23rd-24th	STB 50T-59, Dealer 46
Fluid Level, Checking converter outlet check valve eliminated - check within one minute	23rd-24th	STB 50T-61, Dealer 47
Fluid Temperature Affects...Upshift loss of pressure, bushing wear - pressure tests	54th-55th-56th; 56J	SSB No. 339, p. 5
Flywheel - Application Chart part number reference - incl. converter	23rd-25th (Ultramatic)	SC Vol. 26, No. 4, p. 16
Flywheel superseded parts - 9- and 11-1/4-in. converters	23rd-25th	SC Vol. 26, No. 4, p. 16
Flywheel Attaching Screws (Part Number - Correction) self-locking washers	23rd-25th	SC Vol. 26, No. 10, p. 39
Flywheel Attaching Screws (Part Number - Correction) self-locking washers	23rd-25th (Ultramatic)	SC Vol. 26, No. 10, p. 39
Flywheel Attaching Screws discard old screw - use new self-locking type	23rd-25th (Ultramatic)	SC Vol. 26, No. 8, p. 32
Flywheel Attaching Screws discard old screws - use new self-locking type	23rd-25th	SC Vol. 26, No. 8, p. 32
Flywheel Housing Alignment - Correction Service Manual - run-out	25th	SC Vol. 26, No. 8, p. 32
Flywheel Housing Support Kit, Installing rework holes - shims	2401	SC Vol. 25, No. 4, p. 15
Flywheel Screw superceded part	23rd-24th	SSB No. 335, p. 7
Flywheel Screws part number correction	23rd-25th	SC Vol. 26, No. 10, p. 39
Flywheel, Motor superseded parts - 9- and 11-1/4-in. converters	23rd-25th (Ultramatic)	SC Vol. 26, No. 4, p. 16
Forward Gears Inoperative, Transmission (exc. Gear Start) front pump relief valve sticking	23rd-54th	SSB No. 340, p. 4
Frames, Service production changes - additional parts for service	24th-25th	SC Vol. 26, No. 9, p. 36
Fresh Air Grilles improving air flow - rework	24th-26th	SC Vol. 27, No. 11, p. 50
Front Cross Member Cracks tire wear, reverse camber - reinforcement kit	24th	STB 51T-45 (Zones only)
Front Fenders, Service - Correction superseded parts - side splasher	24th-26th	SC Vol. 27, No. 8, p. 38
Front Fenders, Service superseded parts - moulding location chart	24th-26th	SC Vol. 27, No. 2, p. 11
Front Fenders, Service superseded parts - moulding location updated	24th-54th	SC Vol. 28, No. 3, p. 10
Front Oil Pump - see also: Converter Pump Shaft	--	--
Front Oil Pump and Converter Shaft Kits new parts	54th-55th-56th	SC Vol. 30, No. 8, p. 32
Front Pump Relief Valve material conservation - oversized parts	26th	SC Vol. 27, No. 6, p. 29
Front Pump Relief Valve Spring Seat high range delay, sticking valve - new seat	24th	STB 51T-6, Dealer 5
Front Wheel Bearing Adjustment (Correction) revised torquing procedure	24th-56th	SC Vol. 30, No. 5, p. 20
Front Wheel Bearing Adjustment revised torquing procedure	24th-56th	SC Vol. 30, No. 3, p. 11
Front Window - Water Deflector Production Change, Retrofit	12th Series	SL Vol.8, No. 24
Fuel Pump Diaphragm and Repair Kits, A.C. two lever types - new parts available	24th-54th	SC Vol. 28, No. 8, p. 52
Fuel Pump Diaphragm Kit, A.C. two lever types - identification	26th-54th	SC Vol. 28, No. 7, p. 47
Fuel Pump May Cause High Oil Consumption rough idle - fractured booster diaphragm	22nd-23rd; (24th-54th)	SC Vol. 23, No. 7, p. 40
Fuel Pump Noise kinked/restricted hose or tube	(not specified)	SC Vol. 28, No. 9, p. 56
Fuel Pump Noise squeak, chirp - vacuum cover clearance	24th	SC Vol. 25, No. 12, p. 47
Fuel Pump Noise squeak/chirp at idle - increase vacuum cover clearance	24th	STB 51T-24, Dealer 21
Gas Economy testing/inspections - corrections	(all models)	SC Vol. 25, No. 11, p. 41
Gas Mileage Tester, Attaching Vacomat new model information - bonnet design	24th	SC Vol. 24, No. 10, p. 48
Gasoline Gum sticking valves - cleaning, prevention	(all models)	STB 52T-4, Dealer 4
Gasoline Tank Filler Pipe misaligned to body opening - relocating	24th	SC Vol. 25, No. 12, p. 48
Gasoline Tank Filler Pipe poor access - realignment	24th	STB 51T-28, Dealer 24
Gasoline Tank Float Settings proper adjustment	24th	SC Vol. 25, No. 3, p. 10
Gasoline Tank Vent Whistle slow filling - whistle removal	24th	STB 51T-17, Dealer 14
Gasoline Tank Vent Whistle Eliminated fuel back-up - clean vent obstructions with air	24th	STB 50T-58, Dealer 45
Gasoline, Gum in varnish formation - removal/prevention	(all models)	SC Vol. 27, No. 11, p. 47
Gear Clash, Second Speed synchronizer operation - bearing lock ring burrs	17th-54th	SC Vol. 28, No. 3, p. 11
Gear Shift Lower Bracket superseded parts	24th	SC Vol. 25, No. 12, p. 46
Gears, Heavy Duty, Transmission extreme use - special alloy, shot-peened gears	2633; 5433	SC Vol. 28, No. 6, p. 44
Gears, Heavy Duty, Transmission heavy service in low gear - shot-peened gears	2633	STB 53T-18, Dealer 15
Generator - see: ELECTRICAL
Generator - Scientific Diagnosis output test, regulator jumper - Training Book correction	24th-54th	SC Vol. 26, No. 1, p. 3
Generator - Scientific Diagnosis output test, regulator jumper - Training Book correction	24th-54th	STB 51T-34, Dealer 30
Generator Lubrication, Delco new commutator end housing - revised procedure	25th-26th	SC Vol. 26, No. 12, p. 60
Governor Adaptor Screen - Ultramatic Drive governor sticking - filter added	24th	STB 51T-5, Dealer 4
Governor Cleaning Brushes new special tool - nylon	23rd; (24th-54th, exc. Gear Start)	SC Vol. 24, No. 10, p. 48
Governor Flyweight Ring Tool alternative tool - fabrication	23rd; (24th-54th, exc. Gear Start)	SC Vol. 24, No. 5, p. 18
Governor Housing and Inlet Valve governor rattle - venting changed	23rd-25th	SC Vol. 26, No. 10, p. 38
Governor Nylon Gears - Stripped driving or driven - torque tightening procedure	23rd-26th	SC Vol. 28, No. 6, p. 44
Governor Removal insufficient frame clearance - revised procedure	24th	SC Vol. 24, No. 9, p. 43
Governor Valves Sticking oil screen cleaning	23rd-24th; (25th-54th)	SC Vol. 25, No. 12, p. 48
Governor Vent Valve and Support sticking - improved design	23rd-25th	SC Vol. 26, No. 4, p. 16
Governors, Cleaning inspection, dressing, washing	23rd; (24th-54th, exc. Gear Start)	SC Vol. 24, No. 5, p. 18
Headlight Aiming - Change revised AMA specification	24th-54th	SC Vol. 28, No. 11, p. 64
Headlights, New Style Sealed Beam improved design - use in pairs	18th-54th; 55th-56th	SC Vol. 29, No. 8, p. 42
Heat Control Valve, Manifold - see: FUEL & EXHAUST	--	--
Heater Adjustments and Corrections insufficient heat - checks	24th	SC Vol. 25, No. 2, p. 5
Heater Hoses Reversed control valve flutter - check flow, switch hoses	24th	STB 50T-46, Dealer 35
Heater Motor Ground Wire loose - install lockwasher	24th	SC Vol. 25, No. 12, p. 46
Heater Motor Ground Wire loose - lockwasher	24th	SC Vol. 25, No. 12, p. 46
High Range Clutch: (failures) operating precautions	56th; (54th-55th)	SC Vol. 30, No. 4, p. 16
High Range Clutch: 10 and 12 Plate Assemblies, Identifying visual indicators - parts interchange	23rd-25th	SC Vol. 25, No. 3, p. 12
High Range Clutch: Assembly lubrication improved - vent springs/holes eliminated	23rd-26th	SC Vol. 27, No. 9, p. 42
High Range Clutch: Lubrication and Operation production changes	25th	SC Vol. 26, No. 12, p. 59
High Range Clutch: Piston Ring Gap, Checking precautions - specifications	23rd-24th; (25th-54th, exc. Gear Start)	SC Vol. 25, No. 4, p. 16
High Range Clutch: Plates - Replacement use of new parts only	23rd-25th	STB 52T-21, Dealer 14
Hood - see: BONNET
Hose Alignment, Brake tire rubbing - check for twist	24th	SC Vol. 25, No. 12, p. 48
Hose Alignment, Brake tire rubbing - check for twist	24th	STB 51T-23, Dealer 20
Hose Clamp Pliers new special tool - radiator/heater, spring wire type	24th; (25th-56th)	SC Vol. 25, No. 6, p. 24
Hydraulic Pump Pressure - Convertible and Mayfair slow quarter window - test and correction	2477-2479	SC Vol. 25, No. 9, p. 35
Hydraulic Tappet Equipment and Gauge Set new optional equipment - identification, service, details	2401	STB 50T-53, Dealer 40
Hydraulic Tappet to Valve Stem Clearance proper tolerance	24th-54th	SC Vol. 27, No. 9, p. 41
Hydraulic Tappets, Noisy gum/dirt, low pressure - corrections	22nd-23rd; 24th-54th	SC Vol. 27, No. 11, p. 48
Hydraulic Valve Tappets leaking - cleaning, testing	24th	SC Vol. 25, No. 9, p. 34
Hydraulic Window Equipped Vehicles - Campaign hose chafed - clip removal	2452-2472	STB 51T-8, Dealer 7
Hydraulic Window Kit Change felt eliminated	2469-79; 2452-72	SC Vol. 25, No. 11, p. 44
Hydraulic Window Regulator, Rear Quarter end plate leaks - new type	2467-69; 2577-79; 2677-78-79	SC Vol. 28, No. 1, p. 2
Hydraulic Windows - Glass Breakage regulator contact - new anti-rattler parts	2469-79; 2452-72	SC Vol. 25, No. 8, p. 32
Hypoid Break-In Oil shipped with new carriers and gear sets	26th	STB 53T-16, Dealer 13
Ignition - see: ELECTRICAL
Indicator and Gauge Testing new model information	24th	SC Vol. 24, No. 12, p. 55
Indicator and Gauge Testing proper operation - diagnosis	24th-26th	SC Vol. 27, No. 10, p. 44
Instrument Cluster: Advance Parts Information 54th vs. 26th Series - model usage	5411	STB 54T-1, Dealer 1
Leaks - see also: Bell Housing Oil Seal Breather Converter Oil Leaks/Loss	--	--
Linkage Adjustments (exc. Gear Start) selector, control valve, throttle control and valve, kickdown	24th-54th	SSB No. 340, p. 5
Linkage Adjustments - see also: Throttle Control Rod Throttle Linkage Throttle Valve Lever	--	--
Linkage Adjustments new model information	24th	SC Vol. 24, No. 9, p. 44
Linkage Adjustments new model information	24th	STB 50T-33, Dealer 25
Linkage Adjustments selector, control valve, throttle - latest, updated procedures/special tools	23rd-26th	SC Vol. 27, No. 2, p. 7
Low and Reverse Bands reduced width - interchangeable	24th	SC Vol. 25, No. 12, p. 47
Low Range Drum to Reactor Clutch Housing Clearance specification increased	23rd-24th	SC Vol. 25, No. 6, p. 24
Low Range Operation high range clutch failure - proper use of low range	23rd-25th; (26th-56th)	SC Vol. 25, No. 14, p. 67
Low Range Operation high range failure - proper use	23rd-25th; (26th-56th)	STB 51T-39, Dealer 34
Low Speed Cooling boiling - heavy-duty service fan	24th-26th	SC Vol. 28, No. 5, p. 40
Low Speed Cooling new heavy duty fan for service	24th-26th	STB 53T-22, Dealer 19
Low Speed Disturbance direct drive - alter shift point	54th-55th	SC Vol. 30, No. 2, p. 5
Lubrication Charts new model information	24th	SC Vol. 24, No. 8, p. 35
Lubrication Charts new model information	25th	SC Vol. 25, No. 13, p. 57
Lubrication Charts new model information	26th	SC Vol. 26, No. 11, p.50
Lubrication Charts new model information	54th	SC Vol. 28, No. 4, p. 14
Lubrication Period Revised, Universal Joint and Axle Shaft Bearing Ultramatic, front/rear u-joints - axle interval reduced	24th-54th	SC Vol. 28, No. 5, p. 40
Lubrication Period Revised, Universal Joint and Axle Shaft Bearing Ultramatic, front/rear u-joints - axle interval reduced	24th-54th	STB 53T-23, Dealer 20
Lubrication, Front Universal Joint ball and trunnion type - service interval, proper grease	24th-25th (Ultramatic)	SC Vol. 26, No. 8, p. 32
Lubrication, Front Universal Joint ball and trunnion type - service interval, proper grease	24th-25th (Ultramatic)	STB 52T-26, Dealer 19
Lubrication, Note on additional service points	(all models)	SC Vol. 25, No. 4, p. 15
Manifold Gasket Failures chafing - chamfer manifold edges	(all models)	SC Vol. 25, No. 12, p. 47
Manifold Gasket Leaks, Intake rough idle - improper tightening, detection	(all models)	SC Vol. 23, No. 7, p. 39
Measuring End Thrust Clearance revised procedure	24th	SC Vol. 25, No. 3, p. 12
Mechanical Specifications and Adjustments new model information	2413	SC Vol. 24, No. 12, p. 53
Mechanical Specifications and Adjustments new model information	24th	SC Vol. 24, No. 8, p. 29
Mechanical Specifications and Adjustments new model information	25th	SC Vol. 25, No. 13, p. 49
Mechanical Specifications and Adjustments new model information	26th	SC Vol. 26, No. 11, p. 41
Mechanical Specifications and Adjustments new model information	54th	SC Vol. 28, No. 4, p. 13
Motor Oil New Recommendations	(Not Specified)	SL Vol.7, No. 18
Noise, Engine Fan roar at speed, power steering pump pulley clearance - new fan design	54th	STB 54T-8 (Zones only)
Nylon Upholstery snagged/pulled threads - repair information	5467-97	SC Vol. 28, No. 10, p. 60
Nylon Upholstery Repairs snags - conditioner	5467-97	STB 54T-16, Dealer 8
Oil Consumption, Fuel Pump May Cause High rough idle - fractured booster diaphragm	22nd-23rd; (24th-54th)	SC Vol. 23, No. 7, p. 40
Oil Drain Plug Gasket new nylon type	22nd-56th	SC Vol. 30, No. 1, p. 4
Oil Filter Cartridge - Change Period Revised high-detergents oils - reduced	120-138CD; 115C; 16th?-54th	STB 54T-12, Dealer 7
Oil Filter Cartridge Change Period Revised high detergent oil - reduced interval	120-138CD; 115C; 16th?-54th	SC Vol. 28, No. 10, p. 60
Oil Gallery Metering Plug hole added for front seal - rework earlier models with hydraulic tappets	24th-25th	SC Vol. 26, No. 4, p. 15
Oil Leaks from flywheel housing - locating source	23rd-25th	SC Vol. 26, No. 12, p. 59
Oil Leaks past articles referenced	23rd-54th	SC Vol. 28, No. 10, p. 59
Oil Leaks, Chassis differential carrier, brake backing plates - checks and correction	24th	STB 51T-32, Dealer 28
Oil Leaks, Starter Safety Switch gasket failure - installation assist	23rd-54th	SC Vol. 28, No. 6, p. 44
Oil Level Indicator over full - proper filling, reading	54th	SC Vol. 28, No. 8, p. 51
Oil Loss at Breather level, restrictions, overheating - relocation	23rd-56th; 56J	SSB No. 339, p. 3
Oil Loss Through Breather checks - rear housing passage, planetary oil ring, rear oil pump	24th	STB 50T-36, Dealer 28
Oil Pan Gasket Sets replace RH-LH, together - available in sets	120-138CD; 115C; 1600-1-1A-1D-2; 1700-1-1A-2; 18th-22nd; (23rd54th)	SC Vol. 22, No. 7, p. 26
Oil Pressure Changes production change - revised test specifications	23rd-25th	SC Vol. 27, No. 4, p. 21
Oil Pressure with Filter Equipment lower pressure, light on or flickers at idle - normal	24th	STB 50T-52, Dealer 39
Oil Screen governor/valves sticking - cleaning	23rd-24th; (25th-54th)	SC Vol. 25, No. 12, p. 48
Oil Seal Replacer - Rear Housing new special tool	24th	SC Vol. 25, No. 6, p. 24
Oil Seal, Gear Cover burned, leaking - graphite grease	120-138CD; 115C; 16th-54th	SC Vol. 25, No. 9, p. 35
Oil Seal, Rear Main Bearing leaks - preventative measures	120-138CD; 115C; 16th-18th (exc. 1703-3A-5); 1951; 2000-01-03-06-10-11; 21st-24th; (25th-54th)	SC Vol. 25, No. 9, p. 36
Oil Seal, Rear Main Bearing leaks - undersize	120-138CD; 115C; 16th-18th (exc. 1703-3A-5); 1951; 2000-01-03-06-10-11; 21st-54th	SC Vol. 28, No. 1, p. 3
Oil Seal, Rear Main Bearing leaks, bearing distortion - new cork type, installation	120-138CD; 115C; 16th-18th (exc. 1703-3A-5); 1951; 2000-01-03-06-10-11; 21st-54th	SC Vol. 28, No. 9, p. 55
Oil Seals damage, leaks - special tools, proper use	19th-24th	SC Vol. 25, No. 10, p. 39
Oil Seals damage, leaks - special tools, proper use	23rd-24th	SC Vol. 25, No. 10, p. 39
Operation - Coasting discouraged - high range clutch wear	23rd-25th	STB 52T-14, Dealer 10
Operation Under Emergency Conditions rocking, long pulls, steep grades - use low range	23rd-25th	STB 52T-6, Dealer 5
Overdrive: Disturbance 327 cu. in. - new clutch driven plate	24th	SC Vol. 26, No. 12, p. 60
Overdrive: Disturbance roar at speed - improved new case and ring gear, special clutch driven plate and hub	24th	STB 51T-49, Dealer 43
Overdrive: Governor Wrench new special tool	24th	SC Vol. 25, No. 5, p. 19
Overdrive: Governors, Water In reverse gear blocked - dry and reseal	23rd-25th	SC Vol. 26, No. 12, p. 60
Overdrive: Governors, Water in reverse gear blocked - dry and reseal	23rd-24th-25th	STB 52T-2, Dealer 2
Overdrive: Housings and Bushings bushings available for service - see SC Vol. 24, No. 11	24th	STB 50T-57, Dealer 44
Overdrive: Reverse Gear Jump-Out - R-11 long distance - rework reverse plunger	23rd-24th	SC Vol. 26, No. 2, p. 8
Paint Checking On Certain Panels Of The Body In Color Schemes S And X thermal expansion - panel refinishing procedure	24th	STB 51T-25 (Zones only)
Paint Cracking Condition bad paint - refinish complete car	24th	STB 51T-15, Dealer 12
Paint, Argentine Gray - Code G color retention - new lightfast lacquer, change-over period	24th	STB 50T-60 (Zones only)
Paint: Lustur-Seal - Application utility item - application	(all models)	SC Vol. 25, No. 5, p. 17
Park, Locking in pawl and gear clearance - loose, worn, damaged parts	54th-55th-56th	SSB No. 340, p. 4
Parking Brake Handle - Rattle insufficient tension - additional spring/lubrication	24th	SC Vol. 25, No. 6, p. 23
Parking Brake Handle: Corrections on Early...Vehicles additional clearance - production change, relocate bracket	24th	STB 50T-32, Dealer 24
Parking Brake Linkage Change production improvement - field implementation	24th	SC Vol. 25, No. 1, p. 1
Parking Brake Shoe Strut Lever Pin and Retainer coming out - new clench-type	2401; 2501	SC Vol. 26, No. 12, p. 58
Parking Lamp Cable and Sockets rusted-out - new service part/procedure	24th-25th	SC Vol. 28, No. 5, p. 40
Parking Lamp Cable and Sockets rusted-out - new service part/procedure	24th-25th	STB 53T-26, Dealer 23
Part Number Correction windshield washer control button	26th-54th	SC Vol. 28, No. 7, p. 48
Pedal Pressure high effort - booster spring adjustment	24th; (25th-54th)	SC Vol. 25, No. 7, p. 26
Pinion Bearing Preload service details	26th	STB 52T-41, Dealer 30
Piston Ring Gap, Checking direct drive, high range clutches - specifications	23rd-24th; (25th-54th, exc. Gear Start)	SC Vol. 25, No. 4, p. 16
Piston Rings, New Chrome Plated new part - benefits	(all models)	SC Vol. 25, No. 4, p. 14
Planetary Assembly balanced - identification	26th	SC Vol. 27, No. 4, p. 21
Planetary Cage Damper low speed disturbance - backlash dampers added	24th	STB 51T-26, Dealer 22
Planetary Cage Damper low speed disturbance, backlash - new type	24th	SC Vol. 25, No. 9, p. 35
Planetary Cage Damper Installer new dampers - new special tool	24th	SC Vol. 25, No. 9, p. 36
Plastic Parts, Tar Remover Damage to dulled lens - alternate solvents	24th-54th; (55th-56th)	SC Vol. 28, No. 9, p. 55
Plastic Upholstering and Seat Cover Cleaner foam type	24th	SC Vol. 25, No. 12, p. 48
Power Brakes, Easamatic: Air Cleaner production change - new location	25th	SC Vol. 27, No. 1, p. 6
Power Brakes, Easamatic: Damaged Operating Rod Retainer rod pulled out - replace ball-end retainer	25th	STB 51T-42, Dealer 37
Power Brakes, Easamatic: Operation - Hard Pedal hoses cross-switched	25th	SC Vol. 26, No. 10, p. 38
Power Brakes, Easamatic: Operation - Hard Pedal hoses switched - correct routing	25th	STB 52T-16, Dealer 12
Power Brakes, Easamatic: Pedal Clevis Pin binding - rework	25th	SC Vol. 26, No. 10, p. 40
Power Brakes, Easamatic: Power Brake Kit - Installation Time advance information superseded	24th-25th	STB 52T-15, Dealer 11
Power Brakes, Easamatic: Power Brake Kit installation procedure - Ultramatic-equipped	24th-25th	SC Vol. 26, No. 5, p. 17
Power Brakes, Easamatic: Power Unit new model information - removal and installation	25th	SC Vol. 26, No. 3, p. 10
Power Brakes, Easamatic: Power Unit Removal And Installation service parts not available - unit replacement	25th	STB 51T-43, Dealer 38
Power Brakes, Easamatic: Power Unit Repair Kits Installation reconditioning - in-car	25th	SC Vol. 26, No. 8, p. 31
Power Brakes, Easamatic: Repair Kits and Warranty new service parts - precautions	25th	STB 52T-25, Dealer 18
Power Brakes, Easamatic: Tools new special tools	25th	SC Vol. 26, No. 8, p. 32
Power Brakes, Easamatic: Vacuum Check Valve hard pedal - new type with stop washer	All Models	SC Vol. 30, No. 2, p. 7
Power Brakes, Easamatic: Vacuum Piston Stop dragging, fading brakes - new rubber stop washer	25th	STB 52T-13, Dealer 9
Power Brakes, Easamatic: Vacuum Valve And Operating Rod - Campaign rod pulled out - new pinned type	25th	STB 51T-47, Dealer 41
Power Steering new product information	25th-26th	STB 52T-34, Dealer 25
Power Steering Ball Stud Nut Torque increased - dressing rough seats	26th	SC Vol. 27, No. 8, p. 38
Power Steering Cylinder Assemblies superceded part	54th	SSB No. 351, p. 3
Power Steering Oil proper fluid type and level	25th	SC Vol. 26, No. 10, p. 39
Power Steering Pump Belt Adjusting Tool modification required	25th-54th	SC Vol. 28, No. 2, p. 5
Power Steering Pump Bracket new type - rework special tool	25th-54th	SC Vol. 28, No. 2, p. 5
Power Steering Pumps, Noisy not pump - other causes and corrections	26th	STB 53T-9, Dealer 7
Power Steering Rattles straight, rough roads - gear/ linkage adjustments, new control valve and details	26th-54th	STB 54T-14 (Zones only)
Power Steering Tools complete special tool reference	26th	SC Vol. 27, No. 8, p. 38
Power Steering, Binding (Bendix) ball stud adjustment	25th-54th; 55th-56th	STB 55T-38, Dealer 29
Pre-Delivery Inspections, Seasonal Preparation and Corrections service information	26th	SC Vol. 27, No. 10, p. 46
Pump Check Valve Noise click/flutter - new type valve	23rd-24th	SC Vol. 26, No. 4, p. 15
Pump Check Valve Noise clicking, fluttering - new spring-type valve	23rd-24th	STB 52T-1, Dealer 1
Radiator Core Circulation overheating - core/block reverse flushing	24th	SC Vol. 25, No. 11, p. 43
Radiator Core Mounting leaks, stress - redesigned, install spacer kit	24th	SC Vol. 25, No. 7, p. 27
Radiator Core Upper Tank material restriction, steel tanks leaking - new service part	24th-25th	STB 52T-38 (Zones only)
Radiator Core, New Fan and (CORRECTED) low speed overheating, core leaks - more air, insulator brackets, model usage	24th	STB 51T-30C, Dealer 26
Radiator Core, New Fan and low speed overheating, core leaks - more air, insulator brackets	24th	STB 51T-30, Dealer 26
Radiator Core, New Fan and low speed overheating, core leaks - more air, radiators with insulator brackets	24th	STB 51T-30, Dealer 26
Radiator Filler Caps coolant loss - new 12 lb. type	24th-25th	SC Vol. 27, No. 2, p. 11
Radio Number Plate aluminum removed from production - decal implementation	24th	SC Vol. 25, No. 5, p. 18
Radios, New... new model information - push button, automatic tuning	24th	SC Vol. 24, No. 10, p. 46
Raising Car at X-member do not jack at center	24th	STB 50T-41, Dealer 32
Real Axle Floor Bumper rear u-joint striking floor pan - kit installation	24th	STB 52T-7, Dealer 6
Rear Axle new product information	26th	STB 52T-36, Dealer 26
Rear Axle: Advance Parts Information 11- vs. 12-in. Brakes - parts reference	5411	STB 54T-1, Dealer 1
Rear Brake Support Plate Bolt Torque specification change	26th	SC Vol. 27, No. 5, p. 26
Rear Fender and Quarter Repair Panels superseded parts - minor reworking	24th-25th	SC Vol. 28, No. 6, p. 42
Rear Fender and Repair Panels superseded parts - speedline moulding kit and installation	2401; 2501	SC Vol. 28, No. 8, p. 49
Rear Housing Bearing Retainer Ring Pliers new special tool	24th	SC Vol. 25, No. 6, p. 24
Rear Oil Pump Driver premature wear - hardened	54th-55th-56th	STB 55T-47, Dealer 38
Rear Oil Pump Driver premature wear - redesigned	54th-55th-56th	SC Vol. 30, No. 1, p. 4
Rear Oil Pump Driver premature wear - redesigned	54th-55th-56th	STB 56T-9, Dealer 7
Rear Oil Pump Rotor Sets cost savings - new kits	54th-55th-56th	SC Vol. 30, No. 3, p. 11
Rear Spring Interference bushing not centered - frame reinforcement bulged	2452-72	STB 51T-2, Dealer 2
Rear Spring U-Bolts, Tightening recheck torque - 1000-mile inspection	(all models)	STB 50T-27, Dealer 22
Rear Stabilizer Arm Bolts new, self-locking type	24th-25th	STB 52T-3, Dealer 3
Rear Stabilizer Bolts new self-locking type	24th-25th	SC Vol. 26, No. 6, p. 22
Rear Window - see also: Convertible Top	--	--
Rear Window Replacement new model information	26th	SC Vol. 27, No. 6, p. 28
Rear Window, Damage To Plexi-Glass scratched, dented - remove package tray fastener	2469	STB 51T-18, Dealer 15
Relay (Frigidaire Units) superseded - rewired	26th-54th	SSB No. 340, p. 4
Relay Shaft Kit rattles, insufficient lubrication - new parts	24th	SC Vol. 25, No. 10, p. 38
Relay Shaft Kit Change parts correction	24th	SC Vol. 25, No. 14, p. 67
Removal, Rear Universal Joint yoke cracked from heating - use penetrating oil only	24th-25th (Ultramatic)	SC Vol. 26, No. 10, p. 40
Removal, Rear Universal Joint yoke cracked from heating - use penetrating oil only	24th-25th (Ultramatic)	STB 52T-24, Dealer 17
Removing Clocks exchange service - glass and bezel removal	24th-25th	STB 52T-29, Dealer 22
Repair Kit No. 436729, Rear Universal Joint Universal Products Shaft - installation procedure	2401; 2501; 2601; 5400-01 (Ultramatic)	SSB No. 335, p. 7
Repair Kit, Front Universal Joint roughness, vibration - new repair kit	24th (Ultramatic)	STB 51T-1, Dealer 1
Repair Kit, Universal Joint Spicer - superceded parts	24th-54th	SSB No. 350, p. 7
Repair Kits, Front Universal Joint joint noise, production change - adjust engine location	24th-25th (Ultramatic)	SC Vol. 28, No. 1, p. 1
Retaining Screw Changes self-locking screws, special washers - torque spec	24th	STB 50T-55, Dealer 42
Reverse Not Released - Tips From The Editor planetary ring gear bushing scored/seized - band adjustment, piston sticking	23rd-54th	SC Vol. 28, No. 8, p. 52
Reverse Piston Seal Retainer and Band Adjusting Screw high range clutch failure, dislocated seal - improved parts, same numbers	23rd-26th	SC Vol. 27, No. 11, p. 50
Roughness, Engine - 359 Cu. In. Engine idle, low speed - checks, new design camshaft, change axle ratio	5406-13-26-31	STB 54T-10 (Zones only)
Runaway/Flare - see: ULTRAMATIC	--	--
Seat Adjusting Track Cross Wire, Front not locking - length change	5401-11	SC Vol. 28, No. 9, p. 56
Seat Cushion Location Delivery Inspection	(Not Specified)	SL Vol.8, No. 24
Seat Cushion Pad, Front loss of padding - proper installation	2401	SC Vol. 25, No. 2, p. 8
Seat Cushion Spring Inserts - Installation loose/wrinkled upholstery, too soft/low - insert raises/stiffens	2452-72; 2552-72; 2652-72; 5452-72	SC Vol. 28, No. 9, p. 56
Seat Cushion Spring Noise Rear zig-zag snap/click - rework	24th-25th	SC Vol. 26, No. 10, p. 38
Seat Cushion Stiffeners too soft - new service kits	24th	SC Vol. 25, No. 6, p. 22
Seat Wiring, Short Circuits in 4-Way Power pinched feed wires - relocate	54th	STB 54T-6 (Zones only)
Serial Number new range - different speedometer drive gear	26th	SC Vol. 27, No. 4, p. 21
Serial Number unit reference chart - revised	26th	SC Vol. 27, No. 8, p. 35
Serial Number Correction - Die-Cast Valve Bodies starting numbers incorrect in STB 52T-1, Dealer 1	23rd-24th	SC Vol. 26, No. 6, p. 24
Service Data cleaning, inspection, and off-season preparation	26th-54th	STB 53T-20, Dealer 17
Service Data important checks	26th-54th	SC Vol. 28, No. 6, p. 43
Service Information, Confidential - Gear Start slippage, no upshift, harsh downshift - low front pump pressure, low range brake orifice	54th	STB 54T-17 (Zones only)
Servicemans Training Book - Revisions dehydrator-filter - inoperative compressor	26th-54th	STB 53T-25, Dealer 22
Shock Absorber Grommet Guides centers bushing, provides more bearing surface - installation, tool fabrication	25th-54th	SC Vol. 28, No. 8, p. 50
Shock Absorber Grommets rattles - proper alignment	25th-26th	SC Vol. 27, No. 11, p. 48
Shock Absorber, Front grommet retainer forced through - washer added	24th	SC Vol. 25, No. 11, p. 44
Shock Absorbers - Front and Rear superseded parts - replace in pairs	22nd-54th	SC Vol. 29, No. 4 p. 26
Shock Absorbers and Spring Data part number reference	26th	SC Vol. 27, No. 3, p. 18
Shock Absorbers, Heavy Duty Front superceded part	24th-54th	SSB No. 350, p. 7
Shock Absorbers, Noisy not absorbers - check grommets	25th; (26th-54th)	STB 52T-27, Dealer 20
Shoe Spring Tool, Brake new special tool - holddown spring	24th	SC Vol. 24, No. 10, p. 48
Shoes and Linings, Brake squeak - reduce rivets, add drum damper springs	22nd-23rd; 24th	STB 50T-51, Dealer 38
Spark Plug Gap Setting reduced	24th-54th	SC Vol. 25, No. 7, p. 26
Spark Plug Specification Change, Auto-Lite production change - new service part	26th	SC Vol. 27, No. 5, p. 26
Spark Plug Torque Specifications Change reduced	24th-54th	SC Vol. 28, No. 8, p. 52
Specification Revisions new model information - corrections	24th	SC Vol. 25, No. 3, p. 11
Specification Revisions new model information - Ultramatic fluid drain period	24th	SC Vol. 25, No. 3, p. 11
Speedometer and Governor Driving Gears, Nylon production change - service replacement	26th	SC Vol. 27, No. 9, p. 41
Speedometer and Governor Gears, Nylon superseded steel parts	23rd-26th	SC Vol. 28, No. 7, p. 46
Speedometer Complaints noise, reading error - checks, lubrication	(all models)	SC Vol. 25, No. 6, p. 21
Speedometer Lighting insufficient - modification	2401	SC Vol. 25, No. 5, p. 19
Speedometer Pinions and Adapters offset pinion bore - part number reference	23rd-54th	SC Vol. 28, No. 9, p. 54
Spring Data - Revised 2401-2402 changes - complete, updated parts reference	24th	SC Vol. 25, No. 8, p. 31
Spring Data heavy loads - part number reference	24th	STB 51T-7, Dealer 6
Spring Data heavy loads - parts reference	24th	SC Vol. 25, No. 3, p. 11
Spring Data, Supplementary updated parts reference - additional applications	2401; 2413	SC Vol. 25, No. 5, p. 19
Stabilizer Arm Bolts - Breakage incorrect selection - identification	24th	SC Vol. 25, No. 7, p. 26
Stabilizer Bushing Retainer Clip Installer new special tool	24th	SC Vol. 25, No. 5, p. 19
Stabilizer Bushing Retainer Clip Installer, J-4654 service procedure clarified	24th; (25th-56th)	SC Vol. 25, No. 7, p. 25
Starter - see: ELECTRICAL
Starter Bendix Noise anti-kickout - normal	25th	STB 52T-31, Dealer 23
Starter Motor Bendix Drive - Anti-Kick Out Type false starts, premature disengagement - new type	20th-25th	SC Vol. 26, No. 9, p. 35
Starter Motor Cranking Torque - 359 Cu. In. Engine slow/no cranking, hot - new relay/cable kit and field coils	5406-13-26-31	STB 54T-18 (Zones only)
Starter Motor Removal, Delco early production - long pivot bolt	54th	SC Vol. 28, No. 3, p. 12
Starter Motor: Advance Parts Information 54th vs. 26th Series - Delco, Auto-Lite	54th	STB 54T-1, Dealer 1
Starter Motors, Auto-Lite temporary production substitute - anti-kickout Bendix discontinued	2601	SC Vol. 27, No. 5, p. 26
Starter Switch, Car (Carburetor Switch) operation, failure - checks, adjustments	1951; 20th; (21st-26th)	SL Vol. 17, No. 1
Starters, Delco-Remy failure to engage, tooth butting - voltage checks	5402-11	STB 54T-3, Dealer 3
Starting - Cold Weather Proper Procedure	(Not Specified)	SL Vol.8, No. 24
Static Electricity shocks, radio interference - tire tube powder kit	(all models)	SC Vol. 25, No. 3, p. 12
Steering Column Alignment stiff, rattles - checks, shims	24th	SC Vol. 25, No. 4, p. 16
Steering Column Rattle And Misalignment stiff, noisy - shim gear housing	24th	STB 51T-12, Dealer 10
Steering Cross Bars and Sockets Assemblies interchangeable parts	22nd-56th	SSB No. 348, p. 7
Steering Gear Oil Level leaks - reduced fill	24th	SC Vol. 25, No. 4, p. 16
Steering Gear Oil Level leaks at shaft opening - level reduced	24th	STB 50T-49, Dealer 36
Steering Gear: Advance Parts Information 54th vs. 26th Series - identification, usage	54th	STB 54T-1, Dealer 1
Steering Knuckle Bearing Shims, Front Wheel superseded parts	22nd-56th	SSB No. 348, p. 8
Steering Knuckle Supports superseded parts	22nd-56th	SSB No. 350, p. 7
Steering Wheel Puller Adapter new special tool	24th	SC Vol. 25, No. 12, p. 46
Strike Through, Rear End heavy loads - change to export second leaf	24th	SC Vol. 26, No. 1, p. 4
Strike Through, Rear Spring heavy loads - add export second leaf	24th	STB 51T-46, Dealer 40
Strike-Through, Front End insufficient riding height - new spacers	22nd-25th	SC Vol. 26, No. 8, p. 32
Support Arm Pins and Bushings, Loose proper clearance - other checks and lubrication	22nd-54th	SC Vol. 27, No. 1, p. 6
Support Plate Bolt Torque, Rear Brake specification change	26th	SC Vol. 27, No. 5, p. 26
Support, Loose Rear Engine snapping/popping noise - add spacers/washers	24th	STB 50T-54, Dealer 41
Switch Control Relay failure - fuse testing	26th	SC Vol. 27, No. 10, p. 46
Tail Lamp Lens Distortion heat lamp abuse	(24th-55th); 56th	SC Vol. 30, No. 9, p. 34
Temperature Gauge Reading high reading error - regulator usage, recalibrated sender	24th-26th	SC Vol. 27, No. 4, p. 22
Thermostats and Overheating checking - normal operation	22nd-25th;(26th-54th)	STB 52T-28, Dealer 21
Thermostats, New Cooling System capsule type - overheating, retrofit	24th-26th	SC Vol. 28, No. 5, p. 39
Thermostats, New Cooling System capsule type - overheating, retrofit	24th-26th	STB 53T-11, Dealer 9
Throttle Control Rod bent - length data	24th-54th	SC Vol. 28, No. 1, p. 3
Throttle Control Rod bent - length data	24th-55th	SC Vol. 29, No. 4, p. 26
Throttle Control Rod Adjustment bent - rod length data	24th-55th	SSB No. 340, p. 7
Throttle Control Rod Splasher binding linkage - snow/slush build-up	24th	SC Vol. 25, No. 2, p. 9
Throttle Cross Shaft to Carburetor Rod Tool special tool revised - 359-cid engine, modification	5406-13-26-31	SC Vol. 28, No. 2, p. 6
Throttle Linkage Adjustment Change high range clutch burning - revised procedure	24th	STB 51T-35, Dealer 31
Throttle Linkage Adjustment Change revised procedure	24th	SC Vol. 25, No. 14, p. 68
Throttle Linkage Adjustments supplement - corrections/variations	54th-55th-56th	SSB No. 340, p. 7
Throttle Valve and Timing Valve Kit engine runaway - improved design	23rd-26th	SC Vol. 27, No. 9, p. 40
Tight Bonnet Hinges and Bonnet Vibration sheet metal flutter, buckled - Lubriplate, felt insulators, new type bumpers	24th	STB 50T-43, Dealer 33
Timing Valve Timing Pin - Revised excessive overlap low-to-high, cold - fabricating smaller pin	23rd-26th	SC Vol. 28, No. 6, p. 44
Tire Pressure - Changed conventional vs. power steering - long trips	54th	STB 54T-7, Dealer 5
Tire Thump proper diagnosis - other causes	(all models)	SC Vol. 27, No. 6, p. 30
Tires, How to Reseal Tubeless gun and plug methods	54th	SC Vol. 28, No. 1, p. 4
Tools special tools - compressor removal and replacement	26th-54th	SC Vol. 28, No. 3, p. 11
Torque Specifications field guide	26th	SC Vol. 27, No. 12, p. 52
Torque Specifications revised - shop manual	24th-25th	SC Vol. 27, No. 4, p. 21
Transmission Hoist Special Tool ST-844	All Models	SL Vol.7, No. 18
Transmission Lifting Tool new special tool - production change, modification for old tool	26th	SC Vol. 27, No. 9, p. 41
Transmission Removal - Warning 359-cid engine - heavy-duty air cleaner removal	5406-13-26-31	SC Vol. 28, No. 1, p. 3
Transmission, Service serial number suffix - updated parts	23rd-26th	SC Vol. 27, No. 2, p. 11
Transmissions, Service - Stripped shipped less bell housing	54th-55th	SC Vol. 29, No. 7, p. 37
Trunk Leak water, gasoline - checks, improvements	24th	SC Vol. 25, No. 2, p. 6
Ultramatic Drive Tool suggested tool - assembly line-up arbor, fabrication	23rd; (24th-54th)	SC Vol. 24, No. 7, p. 28
Ultramatic Fluid Drain Period Revised increased - level check unchanged	23rd-24th	STB 50T-59, Dealer 46
Ultramatic Fluid Level, Checking converter outlet check valve eliminated - check within one minute	23rd-24th	STB 50T-61, Dealer 47
Ultramatic Torque Specifications revised - shop manual	24th-25th	SC Vol. 27, No. 4, p. 21
Undercoating Caution avoidance of specific parts - out of balance condition	(all models)	SC Vol. 25, No. 6, p. 21
Undercoating Caution avoidance of specific parts - out of balance condition	(all models)	STB 53T-7, Dealer 6
Undercoating Caution avoidance of specific parts	26th; (54th)	STB 53T-17, Dealer 14
Underseat Heater Fan Guard noise, damage - new part	54th	STB 55T-9, Dealer 8
Underseat Heater Fan Guard noisy bent blades - production change, new service parts	54th	STB 54T-9, Dealer 6
Underseat Heater Fan Guard noisy/bent blades - production change, new service parts	54th	SC Vol. 28, No. 10, p. 59
Universal Joint and Axle Shaft Bearing - Lubrication Period Revised Ultramatic, front/rear u-joints - axle interval reduced	24th-54th	SC Vol. 28, No. 5, p. 40
Universal Joint and Axle Shaft Bearing - Lubrication Period Revised Ultramatic, front/rear u-joints - axle interval reduced	24th-54th	STB 53T-23, Dealer 20
Universal Joint Flange Bolt click, loosening - new type	54th-55th	SC Vol. 29, No. 9, p. 46
Universal Joint Flange Bolt click, loosening - new type	54th-55th	STB 55T-4, Dealer 4
Universal Joint Lubrication, Front ball and trunnion type - service interval, proper grease	24th-25th (Ultramatic)	SC Vol. 26, No. 8, p. 32
Universal Joint Lubrication, Front ball and trunnion type - service interval, proper grease	24th-25th (Ultramatic)	STB 52T-26, Dealer 19
Upper Control Arm Spreader new special tool	24th	SC Vol. 25, No. 5, p. 19
Upper Support Arm - Change in Torque Specifications bolt torque increased	24th-25th	SC Vol. 26, No. 6, p. 24
Upper Support Arm Inner Bracket - Bolt hole offset - additional camber	24th-25th	SC Vol. 26, No. 3, p. 12
Upper Support Arm Inner Bracket Bolts - Campaign loose, sheared - inspect and retorque, new bolt	24th-25th	STB 51T-50, Dealer 44
Upper Support Arm Inner Bracket Bolts stripped threads - new hardware/torque	24th-25th	SC Vol. 26, No. 6, p. 24
Upper Support Arm Inner Bracket Bolts tighten only	24th-25th	STB 52T-9, Dealer 7
Upper Support Arm Inner Bracket Bolts torque tightening - pre-delivery	24th-25th	STB 52T-11 (Zones only)
Upper Support Arm: Change in Torque Specifications upper support arm bolt - increased	24th-25th	SC Vol. 26, No. 6, p. 24
Vibration Damper Puller new special tool	22nd-24th	SC Vol. 25, No. 5, p. 19
Vibration, High Speed - Supplement reinforced flywheel, transmission rear housing - production change, identification	2401	STB 50T-48 (Zones only)
Vibration, High Speed motor, standard or overdrive - flywheel housing support kit	24th-54th	SC Vol. 28, No. 5, p. 39
Vibration, High Speed motor, standard or overdrive - flywheel housing support kit	24th-26th; (54th)	STB 53T-21, Dealer 18
Vibration, High Speed production change coming - flywheel housing support service kit	2401	STB 50T-44 (Zones only)
Voltage Regulator Point Burning And Run-Down Batteries - Delco-Remy Equipped field crossover lead shorted - inspect repair/replace	24th-25th	STB 51T-48, Dealer 42
Voltage Regulator Testing Procedure Delco 1118829 - proper checking	5402-06-11-13-26-31	SC Vol. 28, No. 11, p. 64
Water Distributing Tube (Manifold) persistent overheating - function, inspection, corrosion	120-138CD; 115C; 1600-1-1A-2; 1700-1-1A-2; 18th-20th; (21st-54th)	SC Vol. 18, No. 3
Water in Front Parking Lights conduit leaks - hog-ring	24th	SC Vol. 24, No. 9, p. 43
Water in Front Parking Lights leaking conduit - hog-ring	24th	STB 50T-35, Dealer 27
Water Leak Test-Campaign front roof. upper windshield - inspection, sealing	2467	STB 51T-38, Dealer 33
Water Leaks roof drip molding, windshield header	2467	SC Vol. 25, No. 11, p. 42
Water Leaks windshield and wiper pivots - insufficient field reporting	25th	STB 52T-8 (Zones only)
Water Leaks windshield, pillar post - locating	24th	SC Vol. 25, No. 9, p. 34
Water Leaks, Door - 2 and 4-Door Sedans above vent window - shim weatherstrip	2651-52; 2662-65; 2672; 2692-96	STB 52T-40, Dealer 29
Water Leaks, Drip Moulding front of roof - sealing	2677	STB 53T-10, Dealer 8
Water Leaks, Folding Top Header side rails - header sealing	2469; 2579; 2678-79; 5478-79	SC Vol. 28, No. 10, p. 59
Water Leaks, Rear Quarter window opening - shield kit	2465-95	SC Vol. 24, No. 9, p. 42
Water Leaks, Rear Quarter window opening - shield kit	2465-95	STB 50T-34, Dealer 26
Water Leaks, Trunk Lid proper diagnosis - correction	24th-26th	SC Vol. 27, No. 7, p. 33
Water Leaks, Windshield Pillar Post production change - field installation	2677-78-79	SC Vol. 27, No. 10, p. 43
Water Leaks: Corrections on Early...Vehicles windshield. wipers, trunk lid fit	24th	STB 50T-32, Dealer 24
Water Leaks: Roof Drip Gutter drill relief holes	2467	SC Vol. 26, No. 2, p. 7
Water Pump - see: RADIATOR & COOLING
Weatherstrip Retainer Campaign sharp corners - rework retainers	2467	STB 51T-11, Dealer 9
Wheels, Safety Rim new design - tire changing	24th	SC Vol. 25, No. 3, p. 10
Wheels: Advance Parts Information 11- vs. 12-in. Brakes - parts reference	5411	STB 54T-1, Dealer 1
Window Regulator Handle Escutcheon trim damage - enlarge hole	2662-65; 2672; 2692-95	SC Vol. 27, No. 1, p. 6
Window Stop Adjustment frame catching dust seals - reposition	2467-69	SC Vol. 25, No. 12, p. 47
Window Stop Adjustment loose dust seals, frame catching - reposition	2467-69	STB 51T-21, Dealer 18
Window Weatherstrip Alignment water/air leaks - checks and adjustment	2467-69	SC Vol. 25, No. 14, p. 68
Window Weatherstrip Alignment water/air leaks - correct fit shown	2467-69	STB 51T-37, Dealer 32
Windshield Defroster Opening weak flow - relocate finish molding	26th	STB 52T-39, Dealer 28
Windshield Glass Sealer Inserter new special tool	24th	SC Vol. 25, No. 5, p. 19
Windshield Replacement new model information	24th	SC Vol. 25, No. 1, p. 2
Windshield Replacement new model information	26th	SC Vol. 27, No. 5, p. 24
Windshield Trim Moulding Tool new special tool - weatherstrip insert seal replacer tools reference	26th	SC Vol. 27, No. 8, p. 36
Windshield Washer - see: ACCESSORIES	--	--
Windshield Washer revised wiring installation	26th-54th	SC Vol. 28, No. 1, p. 2
Windshield Washer Control Knob Button inoperative - revised part	26th-54th	SC Vol. 28, No. 5, p. 40
Windshield Wiper (Washer) Coordinator Adjustment spray alignment - blade stroke, spray time duration	54th	SC Vol. 28, No. 8, p. 51
Windshield Wiper - see: INSTRUMENTS	--	--
Windshield Wiper: Lubricating Motors vacuum type - maintenance procedure	22nd-23rd; (24th-56th)	SC Vol. 23, No. 10, p. 52
Windshield Wiper: Wiper Cable Slippage insufficient wiper travel - replace driver	26th	STB 53T-5, Dealer 4
Windshield Wiper: Wiper Cables breakage - checks and adjustment	24th	SC Vol. 25, No. 10, p. 40
Windshield Wiper: Wiper Cables broken cables/pulleys - checks and proper service	24th	STB 51T-31, Dealer 27
Windshield Wiper: Wiper Hose slow/inoperative - modify fuel pump shield, reroute	24th	SC Vol. 25, No. 12, p. 47
Windshield, Scratched dirt, blade retainers - production change, field modification	24th	STB 50T-42 (Zones only)
Windshield, Scratched new design wiper blades - rework early design	24th	SC Vol. 25, No. 3, p. 12
Wiring Diagram new model information - loose leaf (insert in SC Vol. 26, No. 11)	26th	SC Vol. 27, No. 4, p. 22
Wiring Diagram Correction incorrect body feed connection shown	54th	SC Vol. 28, No. 10, p. 59
Wiring Diagrams new model information	24th	SC Vol. 24, No. 8, p. 36
Wiring Diagrams new model information	25th	SC Vol. 25, No. 13, p. 58
Wiring Diagrams new model information	26th	SC Vol. 26, No. 11, p. 51
Wiring Diagrams new model information	54th	SC Vol. 28, No. 4, p. 26
Wonder Seal (Part Number 98739) utility item - minor coolant leaks, casting defects	(all models)	STB 53T-15, Dealer 12

SC = Service Counselor

SL = Service Letter

STB = Service Technical Bulletin

SSB = Studebaker Service Bulletin

NOTE: These PDFs were created from High Quality Scans. It is recommended that you Right Click on the link(s) above and do a "Save Target As". This will download the PDF to your machine rather than trying to open and view it over the web.

Disclosures & Disclaimers

Though previously published elsewhere, this work is provided with my full permission for display on the PackardInfo.com website and the personal use of visitors to that site. Any other unauthorized use, however, is expressly prohibited and may be subject to prosecution. Also, because this index was compiled from documents published by the factory, neither the author nor PackardInfo.com are responsible for errors in content arising from source information.

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.